ERGOMART DS9109 Series User manual

B
7/32"
DS9109
Installation Instructions
Ergonomic solutions for office and light industrial work environments
©2017 Ergomart. All rights reserved.
www.ergomart.com | 888 420 3200
2 3
456
1
PAGE 1 OF 2
DS9109S
A
A
A
A
K or L
I
J
E
E
E
E
C
D
F
F
F
F
G
H
8
DS9109D
7
Locate set screw on bottom of tilter
mechanism by tilting monitor upward.
Use 7/32 Allen wrench (B) to adjust
rotation resistance to desired level. Use cable clip (M) to secure cables to pole.
Slide yoke (J) onto pole. Tighten yoke
thumbscrew when adjusted to desired
height.
Insert tilter mechanism pin into yoke.
Align dog washer(G) with bottom of tilter
mechanism pin and attach with flat head
screw (H).
Attach the VESA adapter (D) to the tilter
mechanism (C) using four 10-32 x 3/8”
flat head screws (E).
Insert pole (K or L) into base (I), aligning
the slot in the pole with the set screw in
the base.
Install self-stick bumper feet as shown.
Attach VESA adapter to monitor using four
M4 x 12mm screws (F). Some monitors
may require a spacer kit. See page 2 for
details.
Tighten set screw using Allen wrench
(B).
B
7/32"
9

A.
7/32" Allen Wrench
Bumper
LS9109S LS9109D
4 4
C.
B.
Monitor Tilter
1 1
D. 75/100mm VESA® Adapter Plate
1 2
E. 10-32 x 3/8" Phillips Flat Head Screw
1 2
F. M4 x 12mm Phillips Pan Head Screw
4 8
G. Dog Washer
4 8
H. 10-32 x 3/8" FPhMS w/Lock Patch
1 2
I. Base
1 2
1 1
J. Yoke 1 2
K. 14 Inch P162 Pole 1 0
L. 28 Inch P162 Pole 0 1
M. Cable Clip 1 2
DS9109
Parts List
www.ergomart.com | 888 420 3200
ITEM DESCRIPTION / PART NO. QUANTITY
Ergonomic solutions for office and light industrial work environments
©2017 Ergomart. All rights reserved.
OPTIONAL SPACER KITS In some cases, the mounting surface on your monitor may be recessed further than permitted by
VESA® standards. As a result, a spacer kit may be required.
.25" Spacer Hardware Kit
(4) .25" Spacers
(4) M4 x 18mm Phillips Pan Head Screws
Order # SPKT-1/4
.5" Spacer Hardware Kit
(4) .5" Spacers
(4) M4 x 25mm Phillips Pan Head Screws
Order # SPKT-1/2
PAGE 2 OF 2
DS9109S DS9109D