Vivo DESK-ST01C User manual

Black 20” x 15” Swivel Couch Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-st01c
SKU: DESK-ST01C
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
A (x1)
Tray
B (x1)
Pole
C (x1)
Arm
S-A (x4)
M6x12mm Screw
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot
be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate
use.
S-B (x3)
M6x35mm Screw
D (x1)
Crossbar
E (x1)
Footing Set
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-C (x6)
M5x12mm Screw
T-B (x1)
5mm Allen Wrench
T-A (x1)
4mm Allen Wrench

3
ASSEMBLY STEPS
STEP 1
Slide Footing Set (E) onto Crossbar (D). Position Footing Set (E) the same distance apart as your furni-
ture leg spacing and secure using M6x12mm Screws (S-A) using 4mm Allen Wrench (T-A).
E
E
D
S-A
T-A

4
STEP 2
Footing Set (E) can be installed on the inside or outside of the furniture legs as shown. Assemble Pole
(B) to match the desired final setup. Make sure in the final setup the furniture legs are resting on the
larger side of Footing Set (E).
Assemble Pole (B) to base assembly using M6x35mm Screws (S-B) and 4mm Allen Wrench (T-A).
Couch Le: Pole outsideCouch Right: Pole inside
Couch Le: Pole insideCouch Right: Pole outside
EB
S-B
T-A
T-A S-B
B
E

5
STEP 3
Attach Arm (C) to Tray (A) using M5x12mm Screws (S-C) and 4mm Allen Wrench (T-A).
NOTE: Tighten the tilt joint on Arm (C) using 5mm Allen Wrench (T-B) before use.
C
A
S-C
T-A
T-B
Loosen or remove the screw
using 4mm Allen wrench (T-A)
to allow full rotation
T-A

6
STEP 4
Adjust Pole (B) height by removing the M6x45mm Bolt (B1) and M6 Nut (B2) using 4mm Allen Wrench
(T-A). Adjust Pole (B) to desired height using the 4 height settings. Reinsert M6x45mm Bolt (B1) and M6
Nut (B2). Retighten using 4mm Allen Wrench (T-A).
B
B1
B2
T-A

7
STEP 9
Slide Arm (C) onto Pole (B). Loosen the level on the Stop Collar by turning counterclockwise. Adjust to
desired height and tighten by turning the lever clockwise. Secure Arm (C) to Pole (B) using the 5mm
Allen Wrench (T-B). Adjust the tilt using 5mm Allen Wrench (T-B).
C
B
T-B
T-B

LAST UPDATED: 04/13/2023
REV2
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303