Ergotron Zip12 User manual

1 of 6
888-06-017-G-00 rev. B • 03/20
Zip12, Two Fan Assembly
Service Manual
Components
1x
7mm
Tools Needed

2 of 6
888-06-017-G-00 rev. B • 03/20
WARNING
828-196
Unplug power cord.
DO NOT place hands on or near fans.
Placing hands on or near fans may
cause equipment damage and/or
serious personal injury.
MOVING PARTS
CAN CRUSH AND CUT
These symbols alert users of a safety condi-
tion that demands attention.All users should
be able to recognize and understand the
significance of the following Safety Hazards
if encountered on the product or within the
documentation. Children who are not able
to recognize and respond appropriately to
SafetyAlerts should not use this product with-
out adult supervision!
Hazard Symbols
Review Symbol Signal Word Level of Hazard
NOTE A NOTE indicates important information that helps you
make better use of this product.
CAUTION
A CAUTION indicates either potential damage to
hardware or loss of data and tells you how to avoid the
problem.
WARNING A WARNING indicates either potential for property dam-
age, personal injury, or death.
ELECTRICAL
An Electrical indicates an impending electrical hazard
which, if not avoided, may result in personal injury, re
and/or death.
Safety
Warning: Unplug power cable from cabinet and make sure power button is turned o before you begin . Replacing the
two fan assembly with power on may cause equipment damage and/or serious personal injury.
WARNING: MOVING PARTS CAN CRUSH AND CUT. Unplug power cord. DO NOT place
hands on or near fans. Placing hands on or near fans may cause equipment damage and/or
serious personal injury.

3 of 6
888-06-017-G-00 rev. B • 03/20
2
1ab
Remove Top
Unplug fan from outlet box and remove cables from retaining clips.

4 of 6
888-06-017-G-00 rev. B • 03/20
4Remove fans from unit.
5Install new fans into unit.
3Remove all fasteners from the fans attached to the unit. 7mm

5 of 6
888-06-017-G-00 rev. B • 03/20
6Reattach and tighten all fasteners.
7Plug the fan into the outlet box and insert cables into retaining clip.
7mm

6 of 6
888-06-017-G-00 rev. B • 03/20
8Attach Top.
ab
c
k(UJRWURQ,QF$OOULJKWVUHVHUYHG
www.ergotron.com | USA: 1-800-888-8458 | Europe: [phone] | China: 400-120-3051 | Japan: [email protected]
)RUORFDOFXVWRPHUFDUHSKRQHQXPEHUVYLVLWKWWSFRQWDFWHUJRWURQFRP
)RU6HUYLFHYLVLWZZZHUJRWURQFRP
)RU:DUUDQW\YLVLWZZZHUJRWURQFRPZDUUDQW\