Esatto ERC603S User manual

Version
V1.1 0922
Everything you need
for your 60  90cm
Cnopy Rngehood
is in this User Mnul
Model/s
ERC603S
ERC903S

User Manual
2
Welcome
Congrtultions on purchsing your new Rngehood. The Estto brnd is
proudly distributed within Austrli by Residenti Group Pty Ltd.
Plese refer to the wrrnty crd t the rer of this mnul for informtion
regrding your product’s prts nd lbour wrrnty, or visit us online t:
www.residenti.group
At Residenti Group, we re customer obsessed nd our Support Tem re
there to ensure you get the most out of your pplince. Should you wnt to lern
more bout your new rngehood, it's fetures or importntly tking cre of the
pplince, our Support Tem re here to help.
You cn use our online Support Centre t nytime by visiting:
http://support.residentigroup.com.u
Or you cn contct us vi phone by diling: 1300 11 HELP (4357).
It is importnt tht you red through the following use nd cre mnul
thoroughly to fmilirise yourself with the instlltion nd opertion
requirements of your pplince to ensure optimum performnce.
Agin, thnk you for choosing n Estto pplince nd we look forwrd
to being of service to you.
Kind Regrds,
The Residenti Tem
Residenti roup
—
Hed Office
165 Brkly Avenue
Burnley, Victori
Austrli 3121
—
ACN
600 546 656
—
Online
residenti.group
www.estto.house
@estto.house
—
Postge
PO Box 5177
Burnley, Victori
Austrli 3121
—
Telephone
1300 11 4357
www.esatto.house

esatto.house
3
Pge 2
Welcome
Pge 4
Sfety Instructions
Pge 8
Product Overview
Pge 10
Instlltion
Instructions
Pge 13
Opertion
Instructions
Pge 14
Mintennce
 Clening
Pge 16
Troubleshooting
Pge 18
Your Receipt
Contents
Pge 19
Purchse Detils
Pge 20
Wrrnty

User Manual
4
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE
REFERENCE
Red this mnul thoroughly before rst use,
even if you re fmilir with this type of product.
The sfety precutions enclosed herein reduce
the risk of re, electric shock nd injury when
correctly dhered to. Mke sure you understnd
ll instructions nd wrnings.
Keep the mnul in  sfe plce for future
reference, long with the completed wrrnty
crd nd purchse receipt. If you sell or trnsfer
ownership of this product, pss on these
instructions to the new owner.
Alwys follow bsic sfety precutions nd
ccident prevention mesures when using n
electricl pplince. The following sttements you
will see in this booklet hve these menings:
WARNING: Indicting informtion concerning
your personl sfety.
CAUTION: Indicting informtion on how to
void dmging the pplince or cbinetry.
IMPORTANT: Indicting tips nd informtion
bout use of the pplince.
USAGE CONDITIONS AND RESTRICTIONS
• Domestic use only: This pplince is intended
for indoor household use only. It is not intended
for commercil, industril or outdoor use. It is not
intended for use in  recretionl vehicle.
• Purpose: Do not use this pplince for nything
other thn its intended purpose. Other uses re
not recommended nd my cuse re, electric
shock or personl injury.
• Attchments: The use of ttchments is not
recommended by the pplince mnufcturer
nd distributor s they my be hzrdous.
• Improper use: Dmge due to improper use,
or repirs mde by unqulied personnel will
void your wrrnty. We ssume no libility
for ny eventul dmges cused by misuse
of the product or noncomplince with these
instructions.
BEFORE USING YOUR APPLIANCE
This mnul explins the proper use of your new
Estto rngehood. Plese red this mnul crefully
before using the product. This mnul should
be kept in  sfe plce for hndy reference. This
rngehood is  domestic pplince which hs been
mnufctured nd tested to comply with Austrlin
nd New Zelnd Stndrd AS/NZS 60335.2.31.
This rngehood must only be instlled in
ccordnce with the instructions provided. Incorrect
instlltion my cuse hrm to persons, dmge
property nd void the product’s wrrnty.
Red the following crefully to void dmge
or injury.
IMPORTANT: Check for ny dmge or mrks.
If you nd the pplince is dmged or mrked,
you must report it within 7 dys if you wish to clim
for dmge/ mrks under the mnufcturer’s
wrrnty. This does not ect your sttutory rights.
Sfety Instructions

esatto.house
5
WARNING: Follow these instructions crefully
to void injury, electric shock or re.
• Young children should be supervised to ensure
they do not ply with the rngehood.
• This pplince is not intended for use by persons
(including children) with reduced physicl,
sensory or mentl cpbilities, or lck of
experience nd knowledge, unless they hve
been given supervision or instruction concerning
the use of the pplince by  person responsible
for their sfety.
• Ensure the rngehood is switched o before
crrying out mintennce, to void ny
possibility of electric shock.
• Do not mbé under the rngehood.
• This rngehood is not suitble for use
over brbecues.
• This rngehood cnnot be instlled for externl
use—only to be instlled indoors.
• The rngehood nd lters must be clened
regulrly to keep in good working order.
• The exhust from the rngehood must not be
dischrged into ny heting ue, which my
crry combustion products from other sources.
(Figure 1)
• Exhust ir must not be dischrged into
 wll cvity, unless the cvity is designed
for the purpose.
• There shll be dequte ventiltion of the room
when the rngehood is used t the sme time
s pplinces burning gs or other fuels (not
pplicble tht only dischrge the ir bck into
the room).
• Regultions concerning the dischrge of ir hve
to be fullled.
• There must be dequte ventiltion of the room
when the rngehood is used t the sme time s
pplinces burning gs or other fuels.
• Your new rngehood is gurnteed ginst
electricl or mechnicl defects, subject to
certin exclusions tht re noted in the Wrrnty
Terms nd Conditions (t the rer of this user
mnul). The foregoing does not ect your
sttutory rights.
• Alwys cover lit gs burners with pots or pns
when rngehood is in use.
• Alwys switch o gs burners before you remove
pots or pns.
• Do not leve lit gs burners exposed due to the
risk of re. (Figure 2)
Figure 1
Figure 2

User Manual
6
Sfety Instructions (Continued)
ELECTRICAL CONNECTION
• Check tht the mins voltge mtches with the
voltge on the dt plte inside the rngehood.
• Check tht the instlltion complies with
stndrds of locl building, gs nd electricl
uthorities.
• Before connecting to the mins supply ensure
tht the mins voltge corresponds to the
voltge on the rting plte inside the rngehood.
• Only plug this unit into  properly erthed outlet.
If in doubt seek dvise from  suitbly qulied
person or service gent.
WARNING: If the supply cord is dmged, it must
be replced by the mnufcturer or its service
gent or similrly qulied person in order to void
 hzrd.
WARNING: All electricl work must be done in
ccordnce with locl nd ntionl electricl codes
s pplicble nd should be undertken
by licenced nd qulied persons only. Filure to
follow these instructions cn result in deth, re or
electricl shock.
SAFETY WARNINGS: FOR THE INSTALLER
When instlling the rngehood, mke sure you
dhere to the minimum nd mximum distnces
from the rngehood bse to the cooktop surfce
(s per tble on pge 10).
Exhust ue instlltion:
The following rules must be strictly followed to
obtin optiml ir extrction.
• Keep exhust ue short nd stright.
• Do not reduce the size or restrict exhust ue.
• Keep bends in the exhust ue to  minimum;
the more bends the lower the extrction
performnce.
• When using exible ue lwys instll
duct with helix pulled tut to minimise
pressure loss.
• Filure to observe these bsic instructions will
drsticlly reduce the performnce nd increse
the noise levels of the rngehood.
Exhust ir must not be dischrged into  wll
cvity, unless the cvity is designed for tht
purpose. The exhust from the rngehood
must not be dischrged into ny heting ue, which
my crry combustion products from other sources.
NOTE: Some instlltions my require the
expndble/telescopic ducting to be cut to length.
Cut with shrp tin snips or  ne-tooth hck
sw blde, tking cre not to distort or dent the
exhust cover. Where using expndble ducting,
it’s importnt to hve the ducting fully tught to
mximise eciency of the irow.
Important notice regarding the extraction mode.
WARNING: Risk of poisoning from exhaust gases
sucked back. Never operate the device in extraction
mode simultaneously with an open ue appliance
when there is not adequate airow guaranteed.

esatto.house
7
Open ue combustion equipment (for example,
gas, oil, wood or coal-red heaters, tankless water
heaters, water heaters) pulls combustion air from
the room and runs it through an exhaust pipe or
chimney to the outside. In the extraction mode,
indoor air is removed from the kitchen and the
adjacent rooms — without sucient air intake this
creates a vacuum. Toxic gases from the chimney or
extraction ue can thereby be sucked back into the
living spaces.
• Always ensure that a sucient supply of fresh air
is guaranteed and that the air can circulate.
• An air supply / extractor box alone does not
ensure compliance with the limit value.
Safe operation is only possible when the negative
pressure in the room where the appliance is located
does not exceed 4 Pa (0.04 mbar). This can be
achieved when the air required for combustion can
ow through openings that are not closable, for
example in doors, windows, in conjunction with an
air supply / extractor box or through other technical
measures. In any case, consult a qualied chimney
sweep who can assess the entire ventilation of
your house and propose appropriate measures for
adequate ventilation.
If the rangehood is used exclusively in the
recirculation mode, unrestricted operation
is possible.
UNPACKING
During trnsporttion, protective pckging ws
used to protect the pplince ginst ny dmge.
After unpcking, plese dispose of ll elements of
pckging in  wy tht will not cuse dmge to
the environment.
All mterils used for pckging the pplince re
environmentlly friendly; they re
100% recyclble nd re mrked with the
pproprite symbol.
CAUTION: During unpcking, the pckging
mterils (polythene bgs, polystyrene pieces, etc.)
should be kept out of rech of children.
DISPOSAL OF THE APPLIANCE
Old pplinces should not simply be disposed
of with norml household wste nd should be
delivered to  collection nd recycling centre for
electric nd electronic equipment. A symbol shown
on the product, the instruction mnul or the
pckging shows tht it is suitble for recycling.
Mterils used inside the pplince re recyclble
nd re lbelled with informtion concerning this.
By recycling mterils or other prts from used
devices you re mking  signicnt contribution to
the protection of our environment.
Informtion on pproprite disposl centres for
used devices cn be provided by your locl uthority.
TTRROOUUBBLLEESSHHOOOOTTIINNGG
Fault Cause Solution
Light on, but fan does
not work
The fan blade is jammed. Switch of the unit and
repair by qualified
service personnel only.
The motor is damaged.
Both light and fan do
not work
light bulb burn. Replace the bulb
with correct rating.
Power cord looses. Plug in to the power
supply again.
Serious Vibration
of the unit
The fan blade is damaged. Switch of the unit and
repair by qualified
service personnel only.
The fan motor is
not fixed tightly.
The unit is not hung
pro-perly on the
bracket.
Take down the unit and
check whether the bracket
is in proper location.
Suction per-formance
not good
Too long distance
between the unit and
the cooking plane
Readjust the
distance to 65-75cm
HINTS ON DISPOSAL
According to the European waste regulation 2012/19/EU this
symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it
should be taken to the appropriate collection point for the
recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. For more detailled information about
recycling of this product, please contact your local council or
your household waste disposal service.
Manufacturer

User Manual
8
Product Overview
YOUR RANGEHOOD
ERC603S ERC903S
Figure 3
Note: The images in this user manual are for reference only. Your appliance may appear dierently.
Model/s ERC603S ERC903S
Product Dimensions (W, D, H): 600mm, 500mm, 638–1000mm 900mm, 500mm, 638–1000mm
Extraction: 750m3/hr 750m3/hr
Weight (Net): 10.61kg 12.23kg
Speed Settings: 3 3
Lighting: 2 × 0.5W LED 2 × 0.5W LED
Aluminium Filters 2 3
Power Supply: 220–240 Volts 50/60Hz 220–240 Volts 50/60Hz
Max Noise Rating: 72dB(A) 72dB(A)
222
600
172
500
638–1000
245
30
222
900
172
500
638–1000
245
30

esatto.house
9
RANGEHOOD COMPONENTS
Your Estto Box Cnopy Rngehood is supplied with:
• 1 × Rangehood
• 1 × Expandable 150mm pipe
• 1 × One-way valve (2pcs)
• 1 × Packet of screws and wall plugs
• 2 × Flue pieces (upper and lower chimney)
• 1 × Wall Bracket (“hook”)
• 1 × Lower Chimney Bracket
• 1 × Outside Chimney bracket
• 1 × User Manual
• 1 × Quick Start Guide
ADDITIONAL ITEMS REQUIRED FOR INSTALLATION
• Duct tape or cable ties
• Ducting relevant to your installation requirements
(including any rigid bends, vents and/or adapters)
• Drill and/or screwdriver
• Spirit Level
• Tape Measure
• Jigsaw
• Ladder
• Pencil
OPTIONAL ACCESSORIES
Residenti Group sell the following optionl ccessories, which cn
be purchsed seprtely by contcting our After Sles Support Tem.
• Crbon Filter
• Vrious ducting solutions (rigid ducting, dpters, vents/outlets nd elbow bends)

User Manual
10
Instlltion Instructions
WARNING: Before strting the instlltion, plese
refer to the Sfety Informtion section.
• Alwys switch the power o prior to beginning
the instlltion.
• Stinless steel is very esily dmged during
instlltion.
• Wherever possible, protect the rngehood with
the crdbord box or plstic.
• A power point must be locted within 1.5m of
the power cord exit from the rngehood, nd it
should be lwys ccessible to llow isoltion
from power during clening or mintennce.
• A 150mm round ducting dpter is supplied,
however ll other ducting ccessories re not.
• All ducting must comply with building codes nd
locl requirements.
• If you re re-circulting the ir, rther thn
ducting, plese ensure tht the side outlet grilles
re not obstructed in ny wy s this will ect
the eciency of the rngehood.
• Ensure tht the rngehood is mounted in 
level position, both horizontlly nd verticlly.
This is essentil to ensure the rngehood
opertes correctly nd prevents grese build
up t one end.
IMPORTANT: Never use  silicone round
your rngehood or ue pieces. Never instll the
rngehood or ue pieces into the plster ceiling
which prevents esy ccess to the rngehood for
servicing requirements.
IMPORTANT: Before instlling your rngehood,
plese record the detils of your rngehood’s rting
lbel (locted within the rngehood, behind the
luminium grese lters) into the form on pge 19.
This will be helpful should you need to contct our
service tem in the future.
POSITIONING THE RANGEHOOD
IMPORTANT: The height of the rngehood
underside must be  minimum of 600mm* to 
mximum 650mm from the top of your cooktop
surfce (for gs cooktops this is the top of the
gs burner).
* If the instlltion instructions for your cooktop
specify  greter distnce thn the minimum, then
tht shll be the minimum height for instlltion.
COOKTOP
FUEL TYPE:
DIMENSION A
Minimum* Maximum
Gas (multiple burners
with maximum 45.4 MJ/h
total output and no
single burner exceeding
16.2 MJ/h output)
600mm 800mm
Gas (multiple burners
with total output greater
than 45.4 MJ/h but less
than 77.8 MJ/h, and no
single burner exceeding
17.3 MJ/h output)
760mm 800mm
Gas (single burner not
exceeding 21.6 MJ/h
output)
650mm 800mm
Gas (single burner with
an output greater than
21.6 MJ/h but not
exceeding 29.2 MJ/h)
760mm 800mm
Electric 600mm 800mm
INSTALLATION PREPARATION
Before beginning the instlltion of your rngehood,
the method of ducting should be considered. This
rngehood cnnot be operted in recircultion
mode. We recommend to duct wherever possible.
Plese follow the below tips on how to correctly
duct your rngehood:
• Alwys use correctly sized ducting.
• Do not reduce the size of the ducting.
• Alwys use solid ducting.
• Alwys use non-mmble ducting.
• Alwys duct to the outside tmosphere.
• Avoid use exible ducting.
• Do not duct into the ceiling spce.
Alwys vent to the outside tmosphere.
• Avoid shrp 90 degree bends s much
s possible. Use 45 degree bends insted
wherever possible.
• Duct to the outside tmosphere using the
shortest duct run possible.
• Use cylindricl ducting whenever possible.
Ducting Options
• Into your ceiling cvity nd then vented through
your eves.
• Stright up nd through the roof.
• Through your wll.

esatto.house
11
4
EN
Picture 1 Picture 2
Picture 3
Picture 4 Picture 5
Bracket
Hook
Extensible tube Inside Bracket
Outside
Safety
screws
4
EN
Picture 1 Picture 2
Picture 3
Picture 4 Picture 5
Bracket
Hook
Extensible tube Inside Bracket
Outside
Safety
screws
4
EN
Picture 1 Picture 2
Picture 3
Picture 4 Picture 5
Bracket
Hook
Extensible tube Inside Bracket
Outside
Safety
screws
4
EN
Picture 1 Picture 2
Picture 3
Picture 4 Picture 5
Bracket
Hook
Extensible tube Inside Bracket
Outside
Safety
screws
WALL MOUNTING INSTALLATION
Prepre for instlltion
1. If you hve n outlet to the
outside, your rngehood
cn be connected s below
picture by mens of n
extrction duct (enmel,
luminum, exible pipe or
inmmble mteril with n
interior dimeter of 150mm)
2. Before instlltion, ensure
tht turn the unit
o nd unplugged from the outlet.
3. The rngehood should dhere to the minimum
nd mximum distnces from the rngehood
bse to the cooktop surfce (s per the Position
the Rngehood section on pge 8).
4. Instll the wll brcket hook in  suitble plce.
Once the instlltion height is xed nd level, the
xed position of the inside chimney brcket is
the plce of chimney. (Figure 4)
5. Fix the outside chimney brcket on the outside
chimney, nd be sure tht the inside chimney cn
be djusted the height in it freely s well s xing
the extensible pipe. Next, instll the extensible
pipe nd chimney on the rngehood. (Figure 5)
6. Lift up the rngehood nd hng onto the wll
brcket hook. (Figure 6)
7. Adjust the height of the inside chimney to the
position of the inside chimney brcket nd x on
it by screw, fter djusting the position, x the
body to the wll with the sfety screws to secure
it. (Figure 7)
8. Fix the one-wy-vlve to the ir outlet of the
rngehood. Then ttched the exhust pipe onto
the one-wy-vlve s shown below.
Wall bracket hook
Expandable pipe Bracket
Outside
chimney
Safety
screws
Inside
chimney
Figure 4
Figure 5
Figure 6
Figure 7
Rangehood
Pipe

User Manual
12
This pge is intentionlly blnk.
But if you wnt to drw something, mke notes or even write
 recipe, it’s ll yours!

esatto.house
13
Opertion Instructions
CAUTION:
• Do not touch the light for 30 minutes after using the appliance as it can be hot.
• Do not cover the globe with thermal insulation or other materials.
CONTROL PANEL
1. Power Button
Press this button to turn o the fan.
2. Low Fan Speed Button
Press this button to extracting at the lowest speed.
It is suitable for simmering and cooking without much steam.
3. Medium Fan Speed Button
Press this button to extracting at a medium speed.
It is suitable for regular cooking.
4. High Fan Speed Button
Press this button to extracting at the highest speed.
Use this fan speed for heavy smoke or steam to achieve the maximum exhaust eciency.
5. Light Button
Press this button to turn the light on and o.
1 42 3 5

User Manual
14
PRIOR TO CLEANING YOUR RANGEHOOD
WARNING!
• Be sure to turn o the pplince nd remove the plug before ny mintennce is perform.
• Alwys let the pplince nd its components cool down before clening them.
• Do not use brsive wipes, chemicls or lcohol s these could dmge the surfce.
• Do not clen ny Electricl/Electronic prts .
• Do not use ny crid or corrosive detergents.
• Do not use ny brsive detergents or ny lkline dishwsher detergents!
• Mintennce nd inspection should be undertken on  frequent bsis.
If there is ny visible dmge,  strong odour or excessive overheting of components,
stop using the pplince.
• Clen the pplince in ccordnce with instructions. Filure to do so my result in  risk of re.
RISK OF ELECTRIC SHOCK!
• Do not use  stem clener.
CLEANING OF THE RANGEHOOD
TASK FREQUENCY
Clen the stinless surfce with  soft cloth nd lukewrm
wter. A clening uid suitble for stinless steel my be used.
NOTE: To prevent ny criss-cross scrtches, ensure tht you
wipe long the grin of the stinless steel.
Weekly
Clen the control pnel with  soft cloth nd wrm wter.
Ensure tht the cloth is clen nd is not too wet. Use  dry soft
cloth to remove ny excess moisture.
Weekly
Clening the mesh lters Monthly
(See Clening the mesh lters for more
detils)
Clening the ctive crbon lter Every 3 to 6 months
(See Instlling nd replcing the crbon
lter for more detils)
Mintennce  Clening

esatto.house
15
CLEANING THE MESH FILTERS
1. Remove  mesh lter.
Clening option #1: Clening Mnully (mx 30°C)
• Sok the lter for bout 3 minutes in wter with  mild non-corrosive grese-removing detergent.
• Wsh the lter seprtely from crockery nd kitchen utensils.
• Brush the lter gently with  soft brush.
NOTE: Do not pply too much pressure to void dmging the lter
• Over time, fding nd discolourtion my hppen.
This is norml nd is not considered  wrrnty issue.
2. Clening option #2: Clening using the dishwsher (mx 30°C)
• Plce the lter in the dishwsher nd run  progrm with  mild non-corrosive grese-removing
detergent. NOTE: It is dvisble not to use rinse ids.
• Wsh the lter seprtely from crockery nd kitchen utensils.
• Brush the lter gently with  soft brush.
NOTE: Do not pply too much pressure to void dmging the lter
• Over time, fding nd discolourtion my hppen.
This is norml nd is not considered  wrrnty issue.
3. Leve the lter to dry nturlly out of direct sunlight.
4. Put the lter bck in its correct position.
INSTALLING AND REPLACING THE CARBON FILTER
The crbon lter is n optionl spre prt vilble to purchse by contcting our After Sles Support Tem.
Do not clen or wsh the crbon lters. If  crbon lter is used, we recommend replcing the crbon lter
every 3 to 6 months.
To instll nd replce the crbon lter:
1. Disconnect the power supply from the wll socket.
2. Remove the grese lters.
3. Instll or replce the ctive crbon lters locted t both ends of the motor.
4. Plce the grese lter bck into position.
5. Reconnect power supply to the wll socket.
6
EN
Cleaning the cooker hood
•To protect the main body from corrosion over a long period of time, the cooker
hood should be cleaned with hot water plus non corrosive detergent every two
months.
•Please do not use abrasive detergent for it will damage the body.
• Keep the motor and other spare parts free from water, as this will cause damage to
the appliance.
• Before cleaning the appliance please remember to cut off power
•The carbon lter shouldn’t be exposed to heat.
• Please don’t tear open the xed bar around the carbon lter.
• If the plug or cord is damaged, please replace it with special soft cord
Installation of the carbon lter
•Remove the grease lters
•The charcoal lters are located at both end of the motor. Turn the charcoal lters
until they are unscrewed.
Note: The carbon lters should be replaced every 3 - 6 months or if they show signs
of damage.
open
close

User Manual
16
OPERATION IN CASE OF EMERGENCY
In the event of n emergency you should:
• Switch o ll rngehood controls.
• Switch the rngehood o t the power outlet nd immeditely unplug.
• Cll After Sles Support on 1300 11 4357 or emil support@residentigroup.com.u
Some minor fults cn be fixed by referring to the instructions given in the tble below.
IMPORTANT: If your pplince ppers to be operting incorrectly, then you should disconnect it
from your electricl supply nd then contct After Sles Support.
WARNING: Do not ttempt to repir the rngehood yourself.
Plese note tht if n engineer is sked to ttend whilst the product is under wrrnty nd finds tht the
problem is not the result of n pplince fult, then you my be lible for the cost of the cll out chrge.
The pplince must be ccessible for the engineer to perform ny necessry repir.
If your pplince is instlled in such  wy tht n engineer is concerned tht dmge will be cused to the
pplince or your kitchen, then they will not complete  repir. This includes situtions where the rngehood
hs been tiled in or seled in with  selnt.
Plese refer to the conditions of tht pper on the wrrnty crd t the rer of this user mnul.
Troubleshooting

esatto.house
17
FAULT COMMON CAUSE COMMON SOLUTIONS
The lights cn be turned on,
however the motor does not
work
Fn switch is broken Cll After Sles Support for further
guidnce.
The motor is broken
Both the light nd motor do
not work
The fuse is broken Reset or replce the fuse.
The power supply cord is loose
or disconnected
Reconnect the power supply to the
wll socket.
Oil is leking The one-wy-vlve nd exhust
pipe re not tightly sel
Disssemble the one-wy-vlve nd
sel with  selnt.
There is  lekge between
section nd cover
Disssemble the section nd sel
with selnt.
The light is not working The light globes re dmged
or blown
Cll After Sles Support for further
guidnce.
The is insucient suction
power or ir is not extrcted
dequtely.
The distnce between the
rngehood nd the cooktop is
too gret.
Hve your instller re-djust the
instlltion position, ensuring tht
the minimum distnces re observed
s per the building code nd relevnt
stndrds.
Ducting is loose, kinked, too
long or too mny bends.
Check tht your rngehood hs been
ducted correctly nd in ccordnce
with the instlltion instructions.
The rngehood is no longer in
 horizontl position
The screws or not tight enough Tighten the screws nd level the
rngehood in  horizontl position.
The rngehood is vibrting
ginst the wll or cupbord
The rngehood undermount is
not fixed correctly.
Tighten the internl sfety screws.

User Manual
18
Attch your receipt
to this pge

esatto.house
19
Purchse Detils
For your records, plese record detils of your purchse below nd stple
your receipt on the opposite pge. Your seril number cn be found on the rer of your Rngehood.
STORE DETAILS
STORE NAME
|
ADDRESS
|
TELEPHONE
|
PURCHASE DATE
|
PRODUCT DETAILS
MODEL NO.
|
SERIAL NO.*
|

User Manual
20
WARRANTY TERMS AND CONDITIONS
RANGEHOODS
This document sets out the terms and conditions of the
product warranties for Residentia Group Appliances. It is
an important document. Please keep it with your proof of
purchase documents in a safe place for future reference
should you require service for your Appliance.
1. IN THIS WARRANTY
(a) ‘acceptable quality’ as referred to in clause 10 of
this warranty has the same meaning referred to in
the ACL;
(b) ‘ACL’ means Trade Practices Amendment (Australian
Consumer Law) Act (No.2) 2010;
(c) ‘Appliance’ means any Residentia Group product
purchased by you accompanied by this document;
(d) ‘ASR’ means Residentia Group authorised service
representative;
(e) ‘Residentia Group’ means Residentia Group Pty Ltd
of 165 Barkly Ave, Burnley VIC 3121, ACN 600 546 656
in respect of Appliances purchased in Australia;
(f ) ‘major failure’ as referred to in clause 10 of this
warranty has the same meaning referred to in the
ACL and includes a situation when an Appliance
cannot be repaired or it is uneconomic for Residentia
Group, at its discretion, to repair an Appliance during
the Warranty Period;
(g) ‘Warranty Period’ means:
(i) where the Appliance is used for personal,
domestic or household use (i.e. normal
single family use) as set out in the instruction
manual, the Appliance is warranted against
manufacturing defects for 24 months, following
the date of original purchase of the Appliance;
(h) ‘you’ means the purchaser of the Appliance not
having purchased the Appliance for re-sale, and ‘your’
has a corresponding meaning.
2. This warranty only applies to Appliances purchased
and used in Australia and is in addition to (and does
not exclude, restrict, or modify in any way) any
non-excludable statutory warranties in Australia.
3. During the Warranty Period Residentia Group or
its ASR will, at no extra charge if your Appliance
is readily accessible for service, without special
equipment and subject to these terms and conditions,
repair or replace any parts which it considers to
be defective. Residentia Group or its ASR may use
remanufactured parts to repair your Appliance. You
agree that any replaced Appliances or parts become
the property of Residentia Group. This warranty does
not apply to light globes, batteries, lters, seals or
similar perishable parts.
4. Parts and Appliances not supplied by Residentia
Group are not covered by this warranty.
Wrrnty
— THIS WARRANTY IS VALID IN AUSTRALIA ONLY —