Esatto ERU52S User manual

Version
V1.2 0922
Everything you need
for your 52  90cm
Undermount Rngehood
is in this User Mnul
Model/s
ERU52S
ERU90S

User Manual
2
Welcome
Congrtultions on purchsing your new Rngehood. The Estto brnd is
proudly distributed within Austrli by Residenti Group Pty Ltd.
Plese refer to the wrrnty crd t the rer of this mnul for informtion
regrding your product’s prts nd lbour wrrnty, or visit us online t:
www.residenti.group
At Residenti Group, we re customer obsessed nd our Support Tem re
there to ensure you get the most out of your pplince. Should you wnt to lern
more bout your new rngehood, it's fetures or importntly tking cre of the
pplince, our Support Tem re here to help.
You cn use our online Support Centre t nytime by visiting:
http://support.residentigroup.com.u
Or you cn contct us vi phone by diling: 1300 11 HELP (4357).
It is importnt tht you red through the following use nd cre mnul
thoroughly to fmilirise yourself with the instlltion nd opertion
requirements of your pplince to ensure optimum performnce.
Agin, thnk you for choosing n Estto pplince nd we look forwrd
to being of service to you.
Kind Regrds,
The Residenti Tem
Residenti roup
—
Head Office
165 Brkly Avenue
Burnley, Victori
Austrli 3121
—
ACN
600 546 656
—
Online
residenti.group
www.estto.house
@estto.house
—
Postage
PO Box 5177
Burnley, Victori
Austrli 3121
—
Telephone
1300 11 4357
www.esatto.house

esatto.house
3
Pge 2
Welcome
Pge 4
Sfety Instructions
Pge 8
Product Overview
Pge 10
Instlltion
Instructions
Pge 13
Opertion
Instructions
Pge 14
Mintennce
 Clening
Pge 16
Troubleshooting
Pge 18
Your Receipt
Contents
Pge 19
Purchse Detils
Pge 20
Wrrnty

User Manual
4
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE
REFERENCE
Red this mnul thoroughly before rst use,
even if you re fmilir with this type of product.
The sfety precutions enclosed herein reduce
the risk of re, electric shock nd injury when
correctly dhered to. Mke sure you understnd
ll instructions nd wrnings.
Keep the mnul in  sfe plce for future
reference, long with the completed wrrnty
crd nd purchse receipt. If you sell or trnsfer
ownership of this product, pss on these
instructions to the new owner.
Alwys follow bsic sfety precutions nd
ccident prevention mesures when using n
electricl pplince. The following sttements you
will see in this booklet hve these menings:
WARNING: Indicting informtion concerning
your personl sfety.
CAUTION: Indicting informtion on how to
void dmging the pplince or cbinetry.
IMPORTANT: Indicting tips nd informtion
bout use of the pplince.
USAGE CONDITIONS AND RESTRICTIONS
• Domestic use only: This pplince is intended
for indoor household use only. It is not intended
for commercil, industril or outdoor use. It is not
intended for use in  recretionl vehicle.
• Purpose: Do not use this pplince for nything
other thn its intended purpose. Other uses re
not recommended nd my cuse re, electric
shock or personl injury.
• Attchments: The use of ttchments is not
recommended by the pplince mnufcturer
nd distributor s they my be hzrdous.
• Improper use: Dmge due to improper use,
or repirs mde by unqulied personnel will
void your wrrnty. We ssume no libility
for ny eventul dmges cused by misuse
of the product or noncomplince with these
instructions.
BEFORE USING YOUR APPLIANCE
This mnul explins the proper use of your new
Estto rngehood. Plese red this mnul crefully
before using the product. This mnul should
be kept in  sfe plce for hndy reference. This
rngehood is  domestic pplince which hs been
mnufctured nd tested to comply with Austrlin
nd New Zelnd Stndrd AS/NZS 60335.2.31.
This rngehood must only be instlled in
ccordnce with the instructions provided. Incorrect
instlltion my cuse hrm to persons, dmge
property nd void the product’s wrrnty.
Red the following crefully to void dmge
or injury.
IMPORTANT: Check for ny dmge or mrks.
If you nd the pplince is dmged or mrked,
you must report it within 7 dys if you wish to clim
for dmge/ mrks under the mnufcturer’s
wrrnty. This does not ect your sttutory rights.
Sfety Instructions

esatto.house
5
WARNING: Follow these instructions crefully
to void injury, electric shock or re.
• Young children should be supervised to ensure
they do not ply with the rngehood.
• This pplince is not intended for use by persons
(including children) with reduced physicl,
sensory or mentl cpbilities, or lck of
experience nd knowledge, unless they hve
been given supervision or instruction concerning
the use of the pplince by  person responsible
for their sfety.
• Ensure the rngehood is switched o before
crrying out mintennce, to void ny
possibility of electric shock.
• Do not mbé under the rngehood.
• This rngehood is not suitble for use
over brbecues.
• This rngehood cnnot be instlled for externl
use—only to be instlled indoors.
• The rngehood nd lters must be clened
regulrly to keep in good working order.
• The exhust from the rngehood must not be
dischrged into ny heting ue, which my
crry combustion products from other sources.
(Figure 1)
• Exhust ir must not be dischrged into
 wll cvity, unless the cvity is designed
for the purpose.
• There shll be dequte ventiltion of the room
when the rngehood is used t the sme time
s pplinces burning gs or other fuels (not
pplicble tht only dischrge the ir bck into
the room).
• Regultions concerning the dischrge of ir hve
to be fullled.
• There must be dequte ventiltion of the room
when the rngehood is used t the sme time s
pplinces burning gs or other fuels.
• Your new rngehood is gurnteed ginst
electricl or mechnicl defects, subject to
certin exclusions tht re noted in the Wrrnty
Terms nd Conditions (t the rer of this user
mnul). The foregoing does not ect your
sttutory rights.
• Alwys cover lit gs burners with pots or pns
when rngehood is in use.
• Alwys switch o gs burners before you remove
pots or pns.
• Do not leve lit gs burners exposed due to the
risk of re. (Figure 2)
Figure 1
Figure 2

User Manual
6
Sfety Instructions (Continued)
ELECTRICAL CONNECTION
• Check tht the mins voltge mtches with the
voltge on the dt plte inside the rngehood.
• Check tht the instlltion complies with
stndrds of locl building, gs nd electricl
uthorities.
• Before connecting to the mins supply ensure
tht the mins voltge corresponds to the
voltge on the rting plte inside the rngehood.
• Only plug this unit into  properly erthed outlet.
If in doubt seek dvise from  suitbly qulied
person or service gent.
WARNING: If the supply cord is dmged, it must
be replced by the mnufcturer or its service
gent or similrly qulied person in order to void
 hzrd.
WARNING: All electricl work must be done in
ccordnce with locl nd ntionl electricl codes
s pplicble nd should be undertken
by licenced nd qulied persons only. Filure to
follow these instructions cn result in deth, re or
electricl shock.
SAFETY WARNINGS: FOR THE INSTALLER
When instlling the rngehood, mke sure you
dhere to the minimum nd mximum distnces
from the rngehood bse to the cooktop surfce
(s per tble on pge 10).
Exhaust ue installation:
The following rules must be strictly followed to
obtin optiml ir extrction.
• Keep exhust ue short nd stright.
• Do not reduce the size or restrict exhust ue.
• Keep bends in the exhust ue to  minimum;
the more bends the lower the extrction
performnce.
• When using exible ue lwys instll
duct with helix pulled tut to minimise
pressure loss.
• Filure to observe these bsic instructions will
drsticlly reduce the performnce nd increse
the noise levels of the rngehood.
Exhust ir must not be dischrged into  wll
cvity, unless the cvity is designed for tht
purpose. The exhust from the rngehood
must not be dischrged into ny heting ue, which
my crry combustion products from other sources.
NOTE: Some instlltions my require the
expndble/telescopic ducting to be cut to length.
Cut with shrp tin snips or  ne-tooth hck
sw blde, tking cre not to distort or dent the
exhust cover. Where using expndble ducting,
it’s importnt to hve the ducting fully tught to
mximise eciency of the irow.
Important notice regarding the extraction mode.
WARNING: Risk of poisoning from exhust gses
sucked bck. Never operte the device in extrction
mode simultneously with n open ue pplince
when there is not dequte irow gurnteed.

esatto.house
7
Open ue combustion equipment (for exmple,
gs, oil, wood or col-red heters, tnkless wter
heters, wter heters) pulls combustion ir from
the room nd runs it through n exhust pipe or
chimney to the outside. In the extrction mode,
indoor ir is removed from the kitchen nd the
djcent rooms — without sucient ir intke this
cretes  vcuum. Toxic gses from the chimney or
extrction ue cn thereby be sucked bck into the
living spces.
• Alwys ensure tht  sucient supply of fresh ir
is gurnteed nd tht the ir cn circulte.
• An ir supply / extrctor box lone does not
ensure complince with the limit vlue.
Sfe opertion is only possible when the negtive
pressure in the room where the pplince is locted
does not exceed 4 P (0.04 mbr). This cn be
chieved when the ir required for combustion cn
ow through openings tht re not closble, for
exmple in doors, windows, in conjunction with n
ir supply / extrctor box or through other technicl
mesures. In ny cse, consult  qulied chimney
sweep who cn ssess the entire ventiltion of
your house nd propose pproprite mesures for
dequte ventiltion.
If the rngehood is used exclusively in the
recircultion mode, unrestricted opertion
is possible.
UNPACKING
During trnsporttion, protective pckging ws
used to protect the pplince ginst ny dmge.
After unpcking, plese dispose of ll elements of
pckging in  wy tht will not cuse dmge to
the environment.
All mterils used for pckging the pplince re
environmentlly friendly; they re 100% recyclble
nd re mrked with the pproprite symbol.
CAUTION: During unpcking, the pckging
mterils (polythene bgs, polystyrene pieces, etc.)
should be kept out of rech of children.
DISASSEMBLY OF THE RANGEHOOD
• To disssemble your rngehood, perform the
instlltion instructions in reverse order.
• Alwys perform disssembly with two people
to void injuries.
DISPOSAL OF THE APPLIANCE
Old pplinces should not simply be disposed
of with norml household wste nd should be
delivered to  collection nd recycling centre for
electric nd electronic equipment. A symbol shown
on the product, the instruction mnul or the
pckging shows tht it is suitble for recycling.
Mterils used inside the pplince re recyclble
nd re lbelled with informtion concerning this.
By recycling mterils or other prts from used
devices you re mking  signicnt contribution
to the protection of our environment.
Informtion on pproprite disposl centres
for used devices cn be provided by your locl
uthority.
TTRROOUUBBLLEESSHHOOOOTTIINNGG
Fault Cause Solution
Light on, but fan does
not work
The fan blade is jammed. Switch of the unit and
repair by qualified
service personnel only.
The motor is damaged.
Both light and fan do
not work
light bulb burn. Replace the bulb
with correct rating.
Power cord looses. Plug in to the power
supply again.
Serious Vibration
of the unit
The fan blade is damaged. Switch of the unit and
repair by qualified
service personnel only.
The fan motor is
not fixed tightly.
The unit is not hung
pro-perly on the
bracket.
Take down the unit and
check whether the bracket
is in proper location.
Suction per-formance
not good
Too long distance
between the unit and
the cooking plane
Readjust the
distance to 65-75cm
HINTS ON DISPOSAL
According to the European waste regulation 2012/19/EU this
symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it
should be taken to the appropriate collection point for the
recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. For more detailled information about
recycling of this product, please contact your local council or
your household waste disposal service.
Manufacturer

User Manual
8
Product Overview
YOUR RANGEHOOD
ERU52S ERU90S
Figure 3
Note: The images in this user manual are for reference only. Your appliance may appear dierently.
520
296
254
10
260
483
900
296
254
10
260
863
Model/s ERU52S ERU90S
Product Dimensions (W, D, H): 520mm, 296mm, 254mm 900mm, 296mm, 254mm
Cut-out Dimensions (A × B): 490mm × 265mm 867mm × 265mm
Extrction: 500m3/hr 750m3/hr
Weight (Net): 6.11kg 8.26kg
Speed Settings: 3 3
Lighting: 2 × 0.5W LED 2 × 0.5W LED
Aluminium Filters 1 2
Power Supply: 220–240 Volts 50/60Hz 220–240 Volts 50/60Hz
Mx Noise Rting: 59dB(A) 70dB(A)

esatto.house
9
RANGEHOOD COMPONENTS
Your Estto Undermount Rngehood is supplied with:
• 1 × Rngehood
• 1 × Expndble 150mm pipe
• 1 × One-wy vlve (2pcs)
• 1 × Pcket of screws
• 1 × User Mnul
• 1 × Quick Strt Guide
ADDITIONAL ITEMS REQUIRED FOR INSTALLATION
• Duct tpe or cble ties
• Ducting relevnt to your instlltion requirements
(including ny rigid bends, vents nd/or dpters)
• Drill nd/or screwdriver
• Spirit Level
• Tpe Mesure
• Jigsw
• Ldder
• Pencil
OPTIONAL ACCESSORIES
Residenti Group sell the following optionl ccessories, which cn
be purchsed seprtely by contcting our After Sles Support Tem.
• Crbon Filter
• Vrious ducting solutions (rigid ducting, dpters, vents/outlets nd elbow bends)

User Manual
10
Instlltion Instructions
WARNING: Before strting the instlltion, plese
refer to the Sfety Informtion section.
• Alwys switch the power o prior to beginning
the instlltion.
• Stinless steel is very esily dmged during
instlltion.
• Wherever possible, protect the rngehood with
the crdbord box or plstic.
• A power point must be locted within 1.5m of
the power cord exit from the rngehood, nd it
should be lwys ccessible to llow isoltion
from power during clening or mintennce.
• A 150mm round ducting dpter is supplied,
however ll other ducting ccessories re not.
• All ducting must comply with building codes nd
locl requirements.
• If you re re-circulting the ir, rther thn
ducting, plese ensure tht the side outlet grilles
re not obstructed in ny wy s this will ect
the eciency of the rngehood.
• Ensure tht the rngehood is mounted in 
level position, both horizontlly nd verticlly.
This is essentil to ensure the rngehood
opertes correctly nd prevents grese build
up t one end.
IMPORTANT: Never use  silicone round
your rngehood or ue pieces. Never instll the
rngehood or ue pieces into the plster ceiling
which prevents esy ccess to the rngehood for
servicing requirements.
IMPORTANT: Before instlling your rngehood,
plese record the detils of your rngehood’s rting
lbel (locted within the rngehood, behind the
luminium grese lters) into the form on pge 19.
This will be helpful should you need to contct our
service tem in the future.
POSITIONING THE RANGEHOOD
NOTE: When the rngehood nd pplince
supplied with energy other thn electricity re
simultneously in opertion, the negtive pressure
in the room must be not exceed 4 P (4 × 10-5 Br).
IMPORTANT: The height of the rngehood
underside must be  minimum of 600mm* to 
mximum 800mm from the top of your cooktop
surfce (for gs cooktops this is the top of the
gs burner).
* If the instlltion instructions for your cooktop
specify  greter distnce thn the minimum, then
tht shll be the minimum height for instlltion.
COOKTOP
FUEL TYPE:
DIMENSION A
Minimum* Mximum
Gs (multiple burners
with mximum 45.4 MJ/h
totl output nd no
single burner exceeding
16.2 MJ/h output)
600mm 800mm
Gs (multiple burners
with totl output greter
thn 45.4 MJ/h but less
thn 77.8 MJ/h, nd no
single burner exceeding
17.3 MJ/h output)
760mm 800mm
Gs (single burner not
exceeding 21.6 MJ/h
output)
650mm 800mm
Gs (single burner with
n output greter
thn 21.6 MJ/h but not
exceeding 29.2 MJ/h)
760mm 800mm
Electric 600mm 800mm
RECIRCULATING INSTALLATION
Before beginning the instlltion of your rngehood,
consider your ducting method.
We recommend ducting your rngehood wherever
possible, for the mximum performnce, however
this rngehood cn be operted in recirculting
mode. You will need to purchse the relevnt
Crbon Filter ccessory which is vilble for
purchse from our After Sles Service Tem.
If you do not hve n outlet to the outside, n
exhust pipe is not required. The rest of the
instlltion method is the sme s Ducted
Instlltion.
DUCTED INSTALLATION
This rngehood hs been supplied with expndble
plstic ducting, however for mximum performnce
we recommend instlling with rigid or semi rigid
ducting. Use cble ties or suitble duct tpe to
secure the exible pipe or ducting to the rngehood
duct outlet.

esatto.house
11
5
EN
PRODUCT OVERVIEW
(A) Hood
(B) Frame
(C) Grease lter
Rngehood (A)
Frme (B)
Grese lter (C)
WARNING: All ducting must be re retrdnt.
Depending on your sitution, there re multiple
options for ducting your rngehood, s follows:
• Stright up through your tiled or metl roof,
using  roof cowl (not supplied with the
rngehood).
• Into your ceiling cvity (where complint with
locl nd ntionl building regultions/codes.
Seek pprovl from the relevnt uthority or
building inspector where necessry.
• Into your ceiling cvity nd then vented to the
tmosphere through your eves, using no more
thn 2 × 90 degree bends within the ducting run.
• Through your wll.
IMPORTANT: Ducting cn hve  mjor eect on
your rngehoods performnce. The following tips
outline how to correctly duct your rngehood.
• Alwys use the correct size ducting.
• This rngehood is designed for use with 150mm
ducting to chieve optimum irow performnce
nd minimised noise.
• For mximum performnce use semi rigid
or rigid ducting.
• Alwys use non-mmble ducting
• Alwys duct to the outside tmosphere, unless
your locl building codes nd regultions permit
otherwise.
• Where using exible ducting, lwys instll the
ducting pulled tut to minimize pressure loss,
nd cut ny excess ducting o.
• Where possible, void using 90 degree bends
nd in their plce use multiple 45 degree bends.
• Keep your totl length of ducting to the shortest
length possible.
• Ensure there re no kinks in your ducting.
• Use cylindricl ducting whenever possible.
ELECTRICAL CONNECTION
Check tht the instlltion complies with the
stndrds of locl building, gs nd electricl
uthorities. Before connecting your rngehood to
the mins supply, ensure tht the mins voltge
corresponds to the voltge on the rting plte inside
the rngehood.
Instlltion steps
NOTE: Do not connect the power cble until the
instlltion is complete! Alwys perform instlltion
with two people to void injuries.
The typicl instlltion method for your
undermount rngehood is into  purpose built
overhed/wll cbinet.
1. Remove the metl grese lter (C).
2. Using  jigsw, crete the required cut-out
for your undermount rngehood, s per the
mesures dimensions in the tble on pge 8.
Mke sure the cut-out is t lest 35mm from the
cbinet edge.
3. Drill  hole in the cbinet, which will lter guide
the power cord.
4. Remove the screws on the frme (B) nd unscrew
the two globes. Ensure tht the two clips on
both sides of the rngehood re suitble for the
thickness of the re where the rngehood is
instlled. If this is not the cse, djust the clips
using the screws.
5. Lift the rngehood to the opening in the wll
cbinet, then pss the power cord through the
opening drilled in step 3.
6. Slide the rngehood completely into the opening
in the wll cbinet. If you wnt to connect the
rngehood to  pipe leding outwrds, ttch
the connecting pipe t the top of the round ir
outlet of the rngehood.
7. While one person is holding the rngehood, the
other person tightens the screws through the
holes in the hood frme (A).
8. Then screw the fn frme (B) bck on nd
tighten the two globes.
9. Finlly, reinstll the grese lter.

User Manual
12
This pge is intentionlly blnk.
But if you wnt to drw something, mke notes or even write
 recipe, it’s ll yours!

esatto.house
13
Opertion Instructions
CAUTION:
• Do not touch the light for 30 minutes fter using the pplince s it cn be hot.
• Do not cover the globe with therml insultion or other mterils.
CONTROL PANEL
1. Power Button
Press this button to turn o the fn.
2. Low Fn Speed Button
Press this button to extrcting t the lowest speed.
It is suitble for simmering nd cooking without much stem.
3. Medium Fn Speed Button
Press this button to extrcting t  medium speed.
It is suitble for regulr cooking.
4. High Fn Speed Button
Press this button to extrcting t the highest speed.
Use this fn speed for hevy smoke or stem to chieve the mximum exhust eciency.
5. Light Button
Press this button to turn the light on nd o.
1 42 3 5
Note: The images in this user manual are for reference only. Your appliance may appear dierently.

User Manual
14
PRIOR TO CLEANING YOUR RANGEHOOD
WARNING!
• Be sure to turn o the pplince nd remove the plug before ny mintennce is perform.
• Alwys let the pplince nd its components cool down before clening them.
• Do not use brsive wipes, chemicls or lcohol s these could dmge the surfce.
• Do not clen ny Electricl/Electronic prts .
• Do not use ny crid or corrosive detergents.
• Do not use ny brsive detergents or ny lkline dishwsher detergents!
• Mintennce nd inspection should be undertken on  frequent bsis.
If there is ny visible dmge,  strong odour or excessive overheting of components,
stop using the pplince.
• Clen the pplince in ccordnce with instructions. Filure to do so my result in  risk of re.
RISK OF ELECTRIC SHOCK!
• Do not use  stem clener.
CLEANING OF THE RANGEHOOD
TASK FREQUENCY
Clen the stinless surfce with  soft cloth nd lukewrm
wter. A clening uid suitble for stinless steel my be used.
NOTE: To prevent ny criss-cross scrtches, ensure tht you
wipe long the grin of the stinless steel.
Weekly
Clen the control pnel with  soft cloth nd wrm wter.
Ensure tht the cloth is clen nd is not too wet. Use  dry soft
cloth to remove ny excess moisture.
Weekly
Clening the grese lters Monthly
(See Clening the grese lters
for more detils)
Clening the crbon lter Every 3 to 6 months
(See Instlling nd replcing the crbon
lter for more detils)
Mintennce  Clening

esatto.house
15
CLEANING THE GREASE FILTERS
1. Remove  grese lter.
Cleaning option #1: Cleaning Manually (max 30°C)
• Sok the lter for bout 3 minutes in wter with  mild non-corrosive grese-removing detergent.
• Wsh the lter seprtely from crockery nd kitchen utensils.
• Brush the lter gently with  soft brush.
NOTE: Do not pply too much pressure to void dmging the lter
• Over time, fding nd discolourtion my hppen.
This is norml nd is not considered  wrrnty issue.
2. Cleaning option #2: Cleaning using the dishwasher (max 30°C)
• Plce the lter in the dishwsher nd run  progrm with  mild non-corrosive grese-removing
detergent. NOTE: It is dvisble not to use rinse ids.
• Wsh the lter seprtely from crockery nd kitchen utensils.
• Brush the lter gently with  soft brush.
NOTE: Do not pply too much pressure to void dmging the lter
• Over time, fding nd discolourtion my hppen.
This is norml nd is not considered  wrrnty issue.
3. Leve the lter to dry nturlly out of direct sunlight.
4. Put the lter bck in its correct position.
INSTALLING AND REPLACING THE CARBON FILTER
The crbon lter is n optionl spre prt vilble to purchse by contcting our After Sles Support Tem.
Do not clen or wsh the crbon lters. If  crbon lter
is used, we recommend replcing the crbon lter every
3 to 6 months.
To instll nd replce the crbon lter:
1. Disconnect the power supply from the wll socket.
2. Remove the grese lter by pressing the lock
nd pulling it downwrd.
3. Instll or replce the crbon lters by plugging them
into the unit nd turning clockwise to securely lock
on ech side.
4. Plce the grese lter bck into position.
5. Reconnect power supply to the wll socket.
NOTE: When  crbon lter is ttched, the extrction power of your rngehood will be lowered.
8
EN
Installation (Vent inside)
If you do not have an outlet to the outside, exhaust pipe is not required and the
installation is similar to the one show in section “Installation (Vent outside)”.
Installing the Carbon Filter
Note: An activated carbon lter is not included. But you can buy it as an extractor
hood.
1 2
Activated carbon lter can be used to
trap odours.
In order to install the activated carbon
lter, the grease lter should be
detached rst. Press the lock and pull it
downward.
3
Plug the activated carbon lter into the
unit and turn it in clockwise direction.
Repeat the same on the other side.
Make sure the lter is securely locked.
Otherwise, it would loosen and cause
dangerous. When activated carbon
lter attached, the suction power will
be lower.

User Manual
16
OPERATION IN CASE OF EMERGENCY
In the event of n emergency you should:
• Switch o ll rngehood controls.
• Switch the rngehood o t the power outlet nd immeditely unplug.
• Cll After Sles Support on 1300 11 4357 or emil support@residentigroup.com.u
Some minor fults cn be fixed by referring to the instructions given in the tble below.
IMPORTANT: If your pplince ppers to be operting incorrectly, then you should disconnect it
from your electricl supply nd then contct After Sles Support.
WARNING: Do not ttempt to repir the rngehood yourself.
Plese note tht if n engineer is sked to ttend whilst the product is under wrrnty nd finds tht the
problem is not the result of n pplince fult, then you my be lible for the cost of the cll out chrge.
The pplince must be ccessible for the engineer to perform ny necessry repir.
If your pplince is instlled in such  wy tht n engineer is concerned tht dmge will be cused to the
pplince or your kitchen, then they will not complete  repir. This includes situtions where the rngehood
hs been tiled in or seled in with  selnt.
Plese refer to the conditions of tht pper on the wrrnty crd t the rer of this user mnul.
Troubleshooting

esatto.house
17
FAULT COMMON CAUSE COMMON SOLUTIONS
The lights cn be turned on,
however the motor does not
work
Fn switch is dmged Cll After Sles Support for further
guidnce.
The motor is dmged
Both the light nd motor do
not work
The fuse is dmged Reset or replce the fuse.
The power supply cord is loose
or disconnected
Reconnect the power supply to the
wll socket.
The light is not working The light globes re dmged
or blown
Cll After Sles Support for further
guidnce.
The is insucient suction
power or ir is not extrcted
dequtely.
The distnce between the
rngehood nd the cooktop is
too gret.
Hve your instller re-djust the
instlltion position, ensuring tht
the minimum distnces re observed
s per the building code nd relevnt
stndrds.
Ducting is loose, kinked, too
long or too mny bends.
Check tht your rngehood hs been
ducted correctly nd in ccordnce
with the instlltion instructions.
The rngehood is vibrting
ginst the wll or cbinetry
The rngehood body is not
fixed correctly.
Fix the body tightly nd ensure
ll the instlltion steps re
performed correctly.
The rngehood motor is not
tightly hung.
Lock in the motor tightly.
The fn blower is dmged. Cll After Sles Support for further
guidnce.

User Manual
18
Attch your receipt
to this pge

esatto.house
19
Purchse Detils
For your records, plese record detils of your purchse below nd stple your receipt
on the opposite pge. Your seril number cn be found on the rer of your Rngehood.
STORE DETAILS
STORE NAME
|
ADDRESS
|
TELEPHONE
|
PURCHASE DATE
|
PRODUCT DETAILS
MODEL NO.
|
SERIAL NO.*
|

User Manual
20
WARRANTY TERMS AND CONDITIONS
RANGEHOODS
This document sets out the terms nd conditions of the
product wrrnties for Residenti Group Applinces. It is
n importnt document. Plese keep it with your proof of
purchse documents in  sfe plce for future reference
should you require service for your Applince.
1. IN THIS WARRANTY
() ‘cceptble qulity’ s referred to in cluse 10 of
this wrrnty hs the sme mening referred to in
the ACL;
(b) ‘ACL’ mens Trde Prctices Amendment (Austrlin
Consumer Lw) Act (No.2) 2010;
(c) ‘Applince’ mens ny Residenti Group product
purchsed by you ccompnied by this document;
(d) ‘ASR’ mens Residenti Group uthorised service
representtive;
(e) ‘Residenti Group’ mens Residenti Group Pty Ltd
of 165 Brkly Ave, Burnley VIC 3121, ACN 600 546
656 in respect of Applinces purchsed in Austrli;
(f ) ‘mjor filure’ s referred to in cluse 10 of this
wrrnty hs the sme mening referred to in the
ACL nd includes  sitution when n Applince
cnnot be repired or it is uneconomic for Residenti
Group, t its discretion, to repir n Applince during
the Wrrnty Period;
(g) ‘Wrrnty Period’ mens:
(i) where the Applince is used for personl,
domestic or household use (i.e. norml
single fmily use) s set out in the instruction
mnul, the Applince is wrrnted ginst
mnufcturing defects for 24 months, following
the dte of originl purchse of the Applince;
(h) ‘you’ mens the purchser of the Applince not
hving purchsed the Applince for re-sle, nd
‘your’ hs  corresponding mening.
2. This wrrnty only pplies to Applinces purchsed
nd used in Austrli nd is in ddition to (nd does
not exclude, restrict, or modify in ny wy) ny
non-excludble sttutory wrrnties in Austrli.
3. During the Wrrnty Period Residenti Group or
its ASR will, t no extr chrge if your Applince
is redily ccessible for service, without specil
equipment nd subject to these terms nd conditions,
repir or replce ny prts which it considers to
be defective. Residenti Group or its ASR my use
remnufctured prts to repir your Applince. You
gree tht ny replced Applinces or prts become
the property of Residenti Group. This wrrnty does
not pply to light globes, btteries, lters, sels or
similr perishble prts.
4. Prts nd Applinces not supplied by Residenti
Group re not covered by this wrrnty.
Wrrnty
— THIS WARRANTY IS VALID IN AUSTRALIA ONLY —