ESCALADE Triumph 45-6747 User manual

888-996-2729-1
1353-378-668-1:XAF
moc.stropsedalacse@gameroom
ytilauqtsehgihehtfoerastcudorpruotahterusneotevirtseW
fi,revewoH.strapgnissimrostcefedgnirutcafunamfoe
erfdna
,tcudorpwenruoyhtiwsmelborpynaevahuoy
EROTSEHTOTTINRUTERTONOD ,
:@eerfllotsutcatnocesaelp
:otetirwrO
stropSedalacsE
tnemtrapeDecivreSremotsuC
988xoB.O.P
60774NI,ellivsnavE
date code (if,rebmunledomruoyedivorpesaelpstropSedalacsEgnitcatnocnehW
erasrebmunesehT.traptnemecalp
eragnitseuqerfirebmuntrapdna,)elbacilppa
.launamsrenwosihtnidna,gnigakcap,tcudorpehtnodetacol
rebmuNledoMruoY
.straptuobagniriuqninehwdate coderuoyevahesaelP
45-6747
888-996-2729-1llaCecivreSremotsuCroF1stropSedalacsE1602©
Date Code: 2 - 45-6747 - - GR
All Rights Reserved
Purchase Date:
PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

Make sure you understand the following tips before you begin to assemble your multi game.
1. Start all bolts by hand before tightening.
2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS 48” 3-IN-1 MULTI GAME TABLE
Assembly Tips
Tools Required:
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO PUT THIS MULT GAME TABLE
TOGETHER.
T1 - Allen Wrench (Included)
IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.
© 2016 Escalade Sports For Customer Service Call 1-888-996-2729
Phillips Screwdriver
Furniture Polish and Cloth
2
All Rights Reserved.
ATTENTION:

1234
56 7 8
910 11
A1
13 14
Side Apron
2pcs
15A 16
17 18 19 20
21 22 23 24
A2 A3 A4 A5
A6 A7 A8
End Apron
2pcs
Support Brace
2pcs
Playfield
1pc
End Leg Panel
2pcs Left Leg
2pcs
Right Leg
2pcs
2-Hole Rod
2pcs
3-Hole Rod
4pcs
5-Hole Rod
2pcs
Black Player
13pcs
Ivory Player
13pcs 2pcs
Rod Washer
16pcs
Foam Rod Bumper
16pcs
Rod Handle Grip
8pcs
Rod End Cap
8pcs
Goal
2pcs
Pusher
2pcs
Felt Pad
2pcs
Net
1pc
Small Table Soccer
Ball 2pcs
Large Kick Soccer Ball
1pc
Hockey Table Cabinet
1pc
25
Goal Box Air Pump
2pcs 1pc
26 27
2
A9
(packed in
the legs)
(Pre-installed)
Goal Box-A
2pcs
Goal Box-B
15B
Parts List !WARNING:
CHOKING HAZARD
Small parts.
Not for children
under 3 yrs.
Leg Leveler
4pcs
12
(Pre-
installed)
Allen Wrench
1pc
1/4” X 1-1/8” Bolt
12pcs
1/4” Washer
12pcs
4 x 12 mm Round
Head Screw 18pcs
4 x 35 mm Round
Head Screw 12pcs
3 x18 mm Screw
26pcs
M4 x 1/2" Bolt
4pcs
M4 Nut
4pcs
Round Head
Screw
4 x 20 mm
4pcs
(Pre-installed)

Assembly Instructions
NOTE: We recommend that two adults work together to assemble this game.
Step 1
Find a clean, level place to begin the assembly of your Soccer Table. The table will be
assembled upside down and then turned over on its legs once the assembly is completed.
Step 2
Remove all the parts from the box and verify that you have all of the parts as shown on the
parts list above. Carefully cut or tear the four corners of the box so that the bottom of the box
can be used as your work surface.
Step 3
Attach the Side Apron (#1) to the End Aprons (#2) using two Screws (#A4)per End Apron.
Assembly Tips:
Attention: If you are using an electric screwdriver in the assembly, please set at low torque
and do not over tighten the hardware. When assembling individual parts, loosely tighten
screws until all screws are inserted, then tighten completely.
Graphics face outside.
Graphics face outside.
Graphics face outside.
NOTE: Make sure all parts are
orientated as per diagram.
NOTE: This assembly is
upside down.

Step 4
With help from another adult,
Slide the green striped Playfield (#4),
with the graphic facing down, into the
grooves of the End Aprons (#2).
Step 5
Now attach the other Side Apron (#1) to the End Aprons (#2) using two Screws (#A4) per End
Apron. Place the Support Braces (#3) on the Playfield (#4) and attach them to the Side Aprons
(#1) using two Screws (#A4) per Brace.
Turn the Cabinet over.
2
2
NOTE: Support Braces (#3) may
be packed inside the legs.
NOTE: Make sure playfield is
inside of all grooves.

Step 6
Slide the Rods (#10, 11, 12) through the Rod Bushings (#P1), which are thepre-installed
plastic bushings in the Side Apron (#1). Be sure to insert the Rods (#10, 11, 12) on only
one side of the Side Apron (#1) in the order shown in 4A, as this will determine how many
players will attach to each rod.
Note: The player Rods have a hole at theirend where the Handle Grips (#18) will go.
Insert the players onto the Rods (#10, 11, 12) by pulling the rod back toward
the Rod Bushing (#P1) and inserting a Rod Bumper (#17), Rod Washer (#16) and the
appropriate number of Players (#13 or #14) followed by Rod Washer (#16) and Rod
Bumper (#17) as shown in 4B.
Now insert the end of the rod through the Rod Bushing (#P1) on the opposite Side
Apron (#1).
Secure the Players (#13 or #14) which you have attached to the Rods (#10, 11, 12)
using one screw (#A6) as shown in image 4C.
Note: The goalie should be at the left side of each person playing the game.
Note: Players of the same team color should
have Handles on the same side, and each team’s
players should be facing their opponent.
Slide empty rod
into rod bushing
and attach parts
BLACK
IVORY
ORDER OF PLAYERS
(Overhead View)
30
30
29
31
31
30
30
29
10
Plastic Rod Washer
Plastic Rod Washer
Foam Rod Bumper
NOTE: STUDY PLAYER PLACEMENT
CLOSELY TO ENSURE CORRECT
PLAY.
Screw
Head
Screw
Head
Foam Rod
Bumper

Step 7
Attach the Goal Boxes (#15A & #15B)
to the End Aprons (#2) using pilot holes
and four Screws (#A5) as shown.
Place the Rod Handle Grips (#18) onto
the Player Rods with a hole at thier end.
Then place the End Caps (#19) onto the
other end of the Player Rods.
Step 8
Step 9
Attach the Net (#23) to the Legs
(#7 and #8) using pilot hole and
one Screw (#A5) per Leg, and
attach the Net to the bottom of
the Legs using the Leg
Levelers (#9).
A3 A2
A5
5
7
8
8
7
6
6
A8
20
A7
Attach the Left and Right Legs (#7 and #8) to
the Hockey Table Cabinet (#5) using three
Bolts (#A2) and three Washers (#A3) per leg.
Attach the End Leg Panels (#6) to the Legs using
pilot holes and four Screws (#A5) per End Leg
Panel.
Attach the Goals (#20) to the end of
playfield using two Bolts (#A7) and
Nut (#A8) per Goal.
9
15A
15B
NOTE: Will need to hold with Wrench
or Plyers (not provided).
Pilot Holes
Pilot Holes
do first
do first
Pilot Holes

CAUTION: Two adults are recommended to flip the table as shown.
1. Lift the table off the ground.
2. Turn the table over, using caution to clear the legs as you turn.
3. Place the table on all four legs at the same time.
HOLD
TABLE
CABINET
DO NOT
HOLD THE
LEGS
DO NOT LEAN THE ON
the LEGS !
Step 10
Lift the assembled table from the floor with at least two strong adults, turn it over, and
set the table on its legs in the location where you want to play.
Remove the paper
backing off the
Felt Pads (#22)
and stick them
to the bottom of
the Pushers
(#21).
FIG.10A

Congratulations! You have now assembled your multi game table. Please note the Care and
Use instructions below to insure many years of trouble free use of your multi game table.
CARE AND USE OF YOUR MULTI GAME TABLE
1. Apply a few drops of lubricant (not provided) to the rods and the bushings.
Rotate rods to make sure you spread lubricant evenly.
2. Use spray furniture polish to clean all exterior surfaces of your soccer table.
3. Use a carpenters level to properly level table using the leg levelers.
4. This product is intended for INDOOR use only.
5. DO NOT sit, climb or lean on the table.
6. DO NOT drag the table when moving it. This will damage the legs.
7. DO NOT set drinks on the table.
Description Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15A
15B
16
17
18
19
20
21
22
23
24
25
26
27
A1
A2
A3
A4
A5
A6
A7
A8
A9
P1
P2
K1
M1
Key # Part #
PRODUCT PARTS LIST FOR MODEL # 45-6747
45-6747GR1
45-6747GR2
45-6747GR3
45-6747GR4
45-6747GR5
45-6747GR6
45-6747GR7
45-6747GR8
45-6747GR9
45-6747GR10
45-6747GR11
45-6747GR12
45-6747GR13
45-6747GR14
45-6747GR15A
45-6747GR15B
45-6747GR16
45-6747GR17
45-6747GR18
45-6747GR19
45-6747GR20
45-6747GR21
45-6747GR22
45-6747GR23
45-6747GR24
45-6747GR25
45-6747GR26
45-6747GR27
45-6747GRA1
45-6747GRA2
45-6747GRA3
45-6747GRA4
45-6747GRA5
45-6747GRA6
45-6747GRA7
45-6747GRA8
45-6747GRA9
45-6747GRP1
45-6747GRP2
45-6747GRK1
45-6747GRM1
Side Apron
End Apron
Support Brace
Playfield
Hockey Table Cabinet
End Leg Panel
Left Leg
Right Leg
Leg Leveler
2-Hole Player Rod
3-Hole Player Rod
5-Hole Player Rod
Black Player
Ivory Player
Goal Box - A
Goal Box - B
Rod Washer
Foam Rod Bumper
Rod Handle Grip
Rod End Cap
Goal
Pusher
Felt Pad (Pre-installed)
Net
Small Table Soccer Ball
Large Kick Soccer Ball
Goal Box (Pre-installed)
Air Pump with Needle
Allen Wrench
1/4” x 1-1/8” Allen Head Bolt
1/4” Flat Washer
4 x 35 mm Phillips Round Head Screw
4 x 12 mm Phillips Round Head Screw
3 x 18 mm Phillips Round Head Bolt
M4 x 1/2” Phillips Round Head Bolt
M4 Lock Nut
4 x 20 mm Phillips Round Head Screw (Pre-installed)
Plastic Rod Bushing (Pre-installed)
Plastic Ball Entry Trim (Pre-installed)
Hardware Kit
Owner’s Manual
2
2
2
1
1
2
2
2
4
2
4
2
13
13
2
2
16
16
8
8
2
2
2
1
2
1
2
1
1
16
16
12
18
26
4
4
4
16
2
1
1

© 2016 Escalade Sports For Customer Service Call 1-888-996-2729
10
All Rights Reserved.
This consumer warranty extends to the original consumer purchase of any ESCALADESPORTS
Product (hereinafter referred as the "Product").
WARRANTY DURATION: This Product is warranted to the original consumer purchase of a pe-
riod of 90 days from the original purchase.
WARRANTY COVERAGE: ESCALADE SPORTS warrants to the original Consumer Purchaser
that any Product of its manufacture is free from defects in material and workmanship when used
for the intended purpose under normal use and conditions. THIS WARRANTY IS VOID IF THE
PRODUCT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLIGENCE,
IMPROPER SERVICE, FAILURE TO FOLLOW INSTRUCTIONS PROVIDED WITH THE PROD-
UCT OR OTHER CAUSES NOT ARISING OUT OF DEFECTS IN MATERIAL AND WORKMAN-
SHIP.
WARRANTY PERFORMANCE: During the above 90 day warranty period, ESCALADESPORTS
shall repair or replace with a comparable model, and Product, or component thereof, which may
prove defective under normal use and proper care, and which our examination shall disclose to
our satisfaction to be thus defective, please contact our Warranty Dept.
1-888-996-2729 / Warranty Dept.
Or Write us at:
Escalade® Sports, Inc. - P.O. Box 889, Evansville, IN 47706
Attn: Warranty Dept.
Or E-mail us at:
[email protected]
Other than shipping requirements no charge will be made for such repair or replacement of in-
warranty Products. ESCALADE SPORTS strongly recommends that the Product is insured for
value prior to mailing.
WARRANTY DISCLAIMERS: ANY IMPLIED WARRANTIES ARISING OUT OF
THIS SALE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIM-
ITED IN DURATION TO THE ABOVE 90 DAY PERIOD. ESCALADE SPORTS
SHALL NOT BE LIABLE FOR LOSS OF USE OF THE PRODUCT OR OTHER
CONSEQUENTIAL OR INCIDENTAL COSTS, EXPENSES OR DAMAGES IN-
CURRED BY THE CONSUMER OF ANY OTHER USE.
Some states do not allow the exclusion or limitation of implied warranties or consequential or
incidental damages, so the above limitations or exclusions may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights and you may also have other
rights which may vary from state to state.
90 DAY LIMITED WARRANTY