Escalade Triumph 45-6079f User manual

888-996-27291-

FAX: 1-866-873-3531

@escaladesports.comgameroom

We strive to ensure that our products are of the highest quality

e of manufacturing defects or missing parts. However, if

and fre

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE,

please contact us toll free @:

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville,IN 47706

date code (ifWhen contacting Escalade Sports please provide your model number,

placement part. These numbers are

applicable), and part number if requestin

g a re

located on the product, packaging, and in this owners manual.

Your Model Number

when inquiring about parts.edocetadPlease have your

45-6079F

888-996-2729For Customer Service Call 1-1© 20 91 Escalade Sports

Date Code: 2 - 45-6079F - HL

Purchase Date:

PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

Make sure you understand the following tips before you begin to assemble your soccer table.

1. Start all bolts by hand before tightening.

2. Some drawings or images in this manual may not look exactly like your product. Please

read and understand the text before starting each assembly step.

TWO ADULTS ARE REQUIRED TO ASSEMBLE

THIS 60" LANCASTER FOOSBALL TABLE

Assembly Tips

Tools Required:

READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND

SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO

ADULTS ARE NEEDED TO ASSEMBLE THIS GAME TABLE.

T1 - Allen Wrench (Included)

IMPORTANT! READ EACH STEP

IN THIS MANUAL BEFORE YOU

BEGIN THE ASSEMBLY.

Phillips Screwdriver

Furniture Polish and Cloth

ATTENTION:

FEATURING:

Quick Connect Leg Assembly & Quick Connect Player Rod Assembly.

These designs are customer friendly and will greatly reduce assembly time.

HARDWARE IDENTIFIER

(To Scale)

H1 - 4 mm x 45 mm

Phillips Round

Head Screw

(8 pcs)

(Not to Scale)

ACCESSORIES IDENTIFIER

(Not to Scale)

A1- Soccer Ball (2 pcs)

H2 - 4 mm x 40 mm

Phillips Flat

Head Screw

(28 pcs)

H3 - 3.5 mm x 12 mm

Phillips Round

Head Screw

(8 pcs)

H4 - 8 mm x 20 mm

Allen Head Bolt

(8 pcs)

H5 - 8.5 mm x 22mm

Flat Washer

(8 pcs)

H6 - 3.5 mm x 18 mm

Phillips Flat

Head Screw

(4 pcs)

H7 - 3.5 mm x 12 mm

Phillips Flat

Head Screw

(4 pcs)

T1 - Allen Wrench

(1 pc)

PARTS IDENTIFIER

(Not to Scale)

P1 - Side Apron

(2 pcs)

P2 - End Apron

With Ball Catcher AttachedWith Female Bushings Attached

(2 pcs)

P3 - Playfield

(1 pc)

P5 - Playfield Support

Brace (2 pcs)

P6 - 3-Red Player

Rod Assembly

With Rod Washers,

Rod Bumpers,Rod

End Cap,Rod Handle

Rod Assembly

With Rod Washers,

Rod Bumpers,Rod

End Cap,Rod Handle

Rod Assembly

With Rod Washers,

Rod Bumpers,Rod

End Cap,Rod Handle

Rod Assembly

With Rod Washers,

Rod Bumpers,Rod

End Cap,Rod Handle

Rod Assembly

With Rod Washers,

Rod Bumpers,Rod

End Cap,Rod Handle

Rod Assembly

With Rod Washers,

Rod Bumpers,Rod

End Cap,Rod Handle

(2 pcs)

P4 - Leg

(4 pcs)

P7 - 2-Red Player

(1 pc)

P8- 5-Red Player

(1 pc)

P9 - 3-White Player

(2 pcs)

P13 - Ball Entry Cup

(2 pcs)

P10 - 2-White Player

(1 pc)

P11 - 5-White Player

(1 pc)

P12 - Manual Scorer

(2 pcs)

P14 - Quick Connect

Bushing - male plug

(16 pcs)

1mm Shim Pack

A2 = 3 pcs

Used to level table if required

2mm Shim Pack

A3 = 3 pcs

Used to level table if required

(Quick Connect)

(Quick Connect) (Quick Connect)

(Quick Connect)(Quick Connect)(Quick Connect)

(Quick Connect)

PARTS REQUIRED:

4 pcs - H1 Phillips Round Head Screw

6 pcs - H2 Phillips Flat Head Screw

2 pcs - P1 Side Apron With Female

Bushings Attached

1 pc - P2 End Apron With Ball Catcher

Attached

FIGURE 1

STEP 1:

Find a clean, level place to begin the assembly of

your soccer table. We recommend building the

table on the box top to protect the parts

during assembly.

It is very important to assemble table on

a level and flat surface. This will keep

the end aprons and side aprons

“FLUSH” on the top and bottom edges.

PARTS REQUIRED:

1 pc - P3 Playfield

STEP 2:

Install Playfield P3 onto Side Aprons

as shown in FIGURE 2.

FIGURE 2

All edges must

be assembled FLUSH

with each other

Attach Side Aprons

P1 onto End Apron

P2 using Phillips Round Head Screws H1

and Phillips Flat Head Screws H2

as shown in FIGURE 1.

Tighten, but Do Not strip out Screws.

IMPORTANT NOTE:

Be sure Phillips Flat Head Screws H2

are screwed “FLUSH” for later Leg

assembly.

NOTE: All Phillips Round Head Screws

H1 and Phillips Flat Head Screws H2

must be installed flush with cabinet.

NOTE: Playfield Graphic on

the underside facing the floor

Tight and

Flush Fit

PARTS REQUIRED:

4 pcs - H1 Phillips Round Head Screw

6 pcs - H2 Phillips Flat Head Screw

1 pc - P2 End Apron Witn Ball Catcher

Attached

FIGURE 3

PARTS REQUIRED:

16 pcs - H2 Phillips Flat Head Screw

STEP 4:

STEP 3:

FIGURE 4

All

PLAYFIELD MUST BE CENTERED

BEFORE INSTALLING PHILLIPS

FLAT HEAD SCREWS H2

Attach End Apron P2 onto Side Aprons

P1 using Phillips Round

Head Screws H1 and Phillips Flat Head Screws H2 as shown in

FIGURE 3.

Tighten, but Do Not strip out Screws.

IMPORTANT NOTE:

Be sure Phillips Flat Head Screws H2 are screwed

“FLUSH” for later Leg assembly.

Be sure Playfield P3 is centered before tightening H1 and

H2.

NOTE: All Phillips

Round Head Screws

H1 and Phillips Flat

Head Screws H2 must

be installed flush with

cabinet.

NOTE: Be careful to install the Phillips

Round Head Screws H1 and Phillips Flat

Head Screws H2 into their correct locations

as per Figure 3.

NOTE: All edges

must be assembled

“FLUSH” with each

other.

Center and attach Playfield P3 into the cabinet

using pre-drilled holes with Phillips Flat Head

Screws H2 as shown in FIGURE 4.

Tighten, but Do Not strip out H1 and H2

Screws.

IMPORTANT NOTE:

Please be sure to install Phillips

Flat Head Screws H2 exactly as per

FIGURE 4.

Screws must be screwed straight

down.

FIGURE 6

THIS STEP REQUIRES TWO OR MORE

VERY CAREFULLY TURN THE

ITS LEGS. BE CAREFUL. THE

PARTS REQUIRED:

8 pcs - H3 Phillips Round Head Screw

2 pcs - P5 Playfield Support Brace

STEP 5:

FIGURE 5

PARTS REQUIRED:

8 pcs - H4 Allen Head Bolts 1 pc - T1 Allen Wrench 8 pcs - H5 Flat Washer

4 pcs - P4 Leg

STEP 6:

H5 P4

P1 DETAIL A

ADULTS.

TABLE OVER AND SET IT ON

TABLE IS VERY HEAVY.

CAUTION:

LEG

NOTE:

Please study this diagram

for correct assembly.

NOTE:

Please watch closely that both

male inner locks on the leg are

correctly inside of and locked

into the female counter part.

Attach Playfield Support Braces P5 onto Side

Aprons P1 using pilot holes with Phillips Round

Head Screws H3 as shown in FIGURE 5.

Tighten, but Do Not strip out H3 Screws.

Attach Legs P4 onto Side Aprons P1 and

End Aprons P2 as shown in FIGURE 6 and DETAIL A .

Secure Legs P4 using Allen Head Bolts H4,

and Flat Washers H5 as shown in FIGURE 6.

Use Allen Wrench T1 to tighten all Legs P4.

NOTE: Carefully align

the inner locks and push

down on leg to correctly

“Lock” the inner lock leg

design.

NOTE: Pilot holes in

Side Aprons

NOTE:

While pushing in on bottom of leg,

it may be necessary to lightly tap

down on the leg with a rubber

hammer.

PARTS REQUIRED:

4 pcs - H6 Phillips Flat Head Screw

2 pcs - P9

3-White Player Rod Assembly With Rod Washers, Rod Bumpers,Rod End Cap,Rod Handle

4 pcs - H7 Phillips Flat Head Screw

1 pc - P10 2-White Player Rod Assembly With Rod Washers, Rod Bumpers,Rod End Cap,Rod Handle

2 pcs - P6 3-Red Player Rod Assembly With Rod Washers, Rod Bumpers,Rod End Cap,Rod Handle

1 pc - P11 5-White Player Rod Assembly With Rod Washers, Rod Bumpers,Rod End Cap,Rod Handle

1 pc - P7 2-Red Player Rod Assembly With Rod Washers, Rod Bumpers,Rod End Cap,Rod Handle

2 pcs - P12 Manual Scorer

1 pc - P8 5-Red Player Rod Assembly With Rod Washers, Rod Bumpers,Rod End Cap,Rod Handle

2 pcs - P13 Ball Entry Cup

16 pcs - P14

Quick Connect Bushing - male plug

STEP 7:

= WHITE

PLAYER

= RED

PLAYER

FIGURE 7

DETAIL B

DETAIL C

P10

P11

ORDER OF PLAYERS

(OVERHEAD VIEW)

P12

P14

P13

STUDY DIAGRAM CLOSELY

FOR CORRECT SOCCER

PLAYER ROD PLACEMENT.

FOR “EASE OF ASSEMBLY”, YOU WILL NOW EXPERIENCE THE TECHNOLOGY OF THE

“QUICK CONNECT ROD ASSEMBLY”.

Place the Player Rods into the cabinet bushings as per the player placement diagram below.

Snap Quick Connect Bushing - male plugs P14 into the female bushing as shown in DETAIL B.

NOTE: There will be four rod handles on each side of the table. It is critical that you set the rods as

shown below so the players will be correctly placed.

Attach Manual Scorers P12 to End Aprons P2 using Phillips Flat Head Screws H6 as shown in FIGURE7 .

Attach Ball Entry Cups P13 to Side Aprons

P1 using Phillips Flat Head Screws H7 as shown in DETAIL C .

Tighten, but Do Not strip out screws.

Must “Lock” into

female bushing

Squeeze Push

Lock to release Installed backwards and

will not lock into place

Female Bushing Replacement

In the remote chance that the female rod bushing may need to be replaced , please follow

these replacement directions.

1. Call our Customer Service Department at 1-888 on the front of your assembly manual and

request the bushing replacement.

2. Locate and remove the Philips screw in the bushing , as per the diagram.

3. Pinch the bushing together and pull the bushing up and out of it’s slot , per the diagram.

4. Install the new bushing , and replace the screw. Tighten , but do not strip out the screw.

Congratulations! You have now assembled your soccer table. Please note the Care and Use

instructions below to insure many years of trouble free use of your soccer table.

CARE AND USE OF YOUR 60” HUNTINGTON SOCCER TABLE

1. Apply a few drops of lubricant (not provided) to the rods and the bushings.

Rotate rods to make sure you spread lubricant evenly.

2. Use spray furniture polish to clean all exterior surfaces of your soccer table.

3. Use a carpenters level to properly level the table using shim stock under the legs，

if required, 1mm and 2 mm shims are packed with this table.

4. This product is intended for INDOOR use only

.5. DO NOT sit, climb or lean on the table.

6. DO NOT drag the table when moving it. This will damage the legs.

7. DO NOT set drinks on the table.

Description Qty.

P10

P11

P12

P13

P14

Key # Part #

PRODUCT PARTS LIST FOR MODEL # 45-6079F

45-6079HLH1

45-6079HLH2

45-6079HLH3

45-6079HLH4

45-6079HLH5

45-6079HLH6

45-6079HLH7

45-6079HLT1

45-6079HLP1

45-6079HLP2

45-6079HLP3

45-6079HLP4

45-6079HLP5

45-6079HLP6

45-6079HLP7

45-6079HLP8

45-6079HLP9

45-6079HLP10

45-6079HLP11

45-6079HLP12

45-6079HLP13

45-6079HLA1

45-6079HLA2

45-6079HLA3

45-6079HLC1

45-6079HLC2

45-6079HLC3

45-6079HLC4

45-6079HLC5

45-6079HLC6

45-6079HLC7

45-6079HLC8

45-6079HLK1

45-6079HLM1

4 mm x 45 mm Phillips Round Head Screw

4 mm x 40 mm Phillips Flat Head Screw

3.5 mm x 12 mm Phillips Round Head Screw

8 mm x 20 mm Allen Head Bolt

8.5 mm x 22 mm Flat Washer

3.5 mm x 18 mm Phillips Flat Head Screw

3.5 mm x 12 mm Phillips Flat Head Screw

Allen Wrench

Side Apron With Female Bushings Attached

End Apron Witn Ball Catcher Attached

Playfield

Leg

Playfield Support Brace

3-Red Player Rod Assembly With Rod Washers,