Escort REDLINE 360C User manual

SETUP GUIDE

DEFENDER DATABASE
Before using this radar detector we suggest that you rst
register your device. Keep your radar detector on hand as you
will need the serial number. The Australian & New Zealand
Defender database has been preloaded and the unit set up for
your region, so you can run it straight out of the Box. However
we recommend from time to time you update the unit. Follow
the below instructions to register and run future updates on
your unit.
Step 1: Go to https://anz.escortradar.com/pages/international-
product-registration
This will take you to the “Product Registration” form. Complete
the online form and create a password – Your email address and
password are required to use the Escort Live App.
Step 2: Click on the left menu item labelled “Update Your Device”
Select Redline 360c from the dropdown list and download and
install “Detector Tools Pro” Both Windows and Mac versions
available.
Step 3: Once downloaded and installed, open the program and
plug in your detector using a USB to mini USB cable. Once the
detector has been recognised, the serial number (top right of the
program window) will turn green which indicates the device is ready
to proceed.
Step 4: Click on the rst large icon labelled “Merge your data with
the latest Escort Defender Database”. The database will now
download directly to your device. Do not unplug the device until
you see the pop up message saying it has completed.
Step 5 (Optional): To use Escort Live, connect your radar detector
to your smartphone via Bluetooth – Refer to the Quick Start Guide
included in the box.

DEVICE SETTINGS
When connected to the Escort Live app, you can use the app
to change your settings. If you don’t wish to use the app, the
settings can be changed on the radar detector as follows:
Access the “Preferences” menu - Press and hold SEN and BRT
buttons together.
SEN is used to change and review the preference category.
+and -are used to change the settings within a category.
BRT is used to change and review a sub-category and to conrm
selections.
To exit, press the power button or simply wait a few seconds
without pressing any buttons. A “Completed” message will display,
conrming your selection(s) are now saved.
Recommended settings:
Refer to the user manual (available to download https://anz.
escortradar.com/pages/product-help-manuals) for full meanings of
the different options
User Mode: Advanced
Pilot Mode: Full Word
Arrow Mode: Multiple
Speed Display: On
Cruise Alert: 40km/hr
Over Speed: 110km/hr
Over Speed Limit: Speed Limit
Meter Mode: Spec
Alert Tones: Standard
AutoMute: Medium
AutoLearn: On
AutoPower: Off

RADAR BANDS
Bands will already be set to your Country/State at time of
shipping. Keep this guide for future reference.
These settings are subject to change and are correct at time of
publishing - June 2021
For Australia & New Zealand warranty registration
please go to tinyurl.com/neltronicswty
BANDS NZ WA SA QLD NSW VIC ACT TAS NT
X ---------
KSW ---------
K1 ON - ON ON ON - - - -
K2 - ON ON ON ON ON ON ON -
K3 ---------
K4 ON - - ON ON - - - -
K5 ON--------
MTRCD - - - ON ON - - - -
MTRCT - - - ON ON - - - -
STRELKA - - - - - - - - -
GATSO - - - ON ON ON - - -
KaSW ---------
Ka1 ---------
Ka2 --------ON
Ka3 ---------
Ka4 ---------
Ka5 ON - - - - ON ON - -
Ka6 ON ON ON ON ON ON ON - -
Ka7 ---------
Ka8 ---------
Ka9 ---------
Ka10 ---------
LASER ON ON ON ON ON ON ON ON ON