ESDMAN 001-9502 User manual

Do not disassemble the product without permission.
Do not use in dangerous environment(such as flammable and explosive)
Do not use in place with plenty of oil or water,high temperature and humidity.
Thank you very much for purchasing our products, please read the manual in its entirety before
use.
01 Product Picture
02 Safety
Comply with the limit request of ANSI/ESD S20.20 on calibration test for wrist strap/human
body system resistance
Comply with the request of ANSI/ESD S1.1 on auditing test for wrist strap/human body system
resistance
Comply with the request of ANSI/ESD TR53 on periodic verification method for wrist
strap/human body resistance
Comply with the limit request of IEC 61340-5-1 on periodic verification test for wrist
strap/human body resistance
Comply with limit request of GJB3007A-2009 on periodic verification test for wrist strap/human
body resistance
03 Industry Standard and System Certificate
Workstation Monitor_001-9502
Specification

Measure dual wrist strap system resistance in real time，which ensure the personnel grouding
connection is more safety and stable.
Start testing while plug wrist strap into monitor, no monitoring turn off function.
Monitor two dual wrist straps of two station and one ESD table mat or grounding connection,
it’s convenient to support different options for customer’s request of different stations.
The ESD table mat alarm value is set by monitoring the resistance range of the ESD table mat
to ensure the efficiency and stability of the electrostatic discharge path between the ESD table
mat and the ground wire. The resistance setting of the ground connection have multiple gears,
which is convenient for customers to choose the impedance of different meter to the ground, to
ensure the unobstructed release path of the equipment to the ground, and to ensure the safety
of the product.
Accuracy : 1±20% (e.g. When set wrist strap upper limit to 10M ohms, 8M pass and 12M failed
When set ground limit to 10 ohms, 8 ohms pass and 12 ohms failed)
Aluminum alloy casing design: Stylish appearance and with good shielding performance.
04 Feature
05 Specification
06 Test Range Setting Via DIP Switch
Wrist Strap Test
Table Mat Test
Metal Grounding
Alarm Indication
Power Supply
Body Size
Operation Environment
Two dual wire wrist straps
One (Option)
One (Option)
LED indication (green:OK, red:alarm),audible alarm
AC100~240V 50/60Hz;DC 12V;200mA
105×75×28mm (L×W×H)
0C~60C, indoor use
1
2
3
4
5
6
7
8
9
10
11
12
1
OFF
OFF
ON
ON
2
OFF
ON
ON
OFF
3
OFF
ON
OFF
ON
OFF
ON
4
OFF
OFF
ON
ON
5
OFF
ON
Result (Unit: Ohms)
Wrist Band Range 1M-10M
Wrist Band Range 1M-35M
Wrist Band Range 15M-10M
Wrist Band Range 1.5M-35M
3.5M(When ESD Mat)
6.5M(When ESD Mat)
3 Ohms(When metal ground)
5 Ohms(When metal ground)
10 Ohms(When metal ground)
15 Ohms(When metal ground)
Test Metal ground
Test ESD Mat

ESDMAN product have passed strict factory inspection.In case of failure,please contact our
ESDMAN team and provides details of the failure.
12 months from the date when products arrived at the buyer’s place.
Warranty
This product is inspected by ESDMAN QC,when it is in normal use within the warranty period,if it
is damaged or fails due to poor design and manufacturing,free maintenance could be provided.
Coverage
Ground wires, screws and connector belong to the loss part and are not covered by warranty.
Damage,breakage or failure due to abnormal use.
Failure caused by modification or disassemble of maintenance not from ESDMAN
Failure caused by fire,natural disaster,flood,earthquake and other natural irresistible factors.
Failure caused by abnormal voltage etc external factors.
Out of coverage
08 Warranty
Attach two banana plugs into red and blue jacks respectively,the other end terminal is 3.5
mono channel,let it connect to monitor OP1 or OP2.Then adjust the resistance of ESDMAN
001-1001 to 8M,OP1 or OP2 should be green,it indicates monitor works correctly.Once
resistance of ESDMAN 001-1001 at 12M,OP1 or OP2 should remain red.
Attach two banana plugs into red and black jacks respectively,another terminal connect the


green color ground connection to check for alarm trigger ).
Range: 1M - 100M in 1M steps
ESDMAN 001-1001 Technical Specifications
Equipment required:For this test,the workstation monitor should be disconnected from the
monitored ground.Use the ESDMAN 001-1001,to prevent misreading,the ESDMAN 001-1001
incorporates a color coding systems to divide the display into 3 groups to indicate ohms,Ki-
lohms and Megohms.Special attention has been given to reliability.A special multiple gold
contact switch arrangement ensures that back-up contacts are always available to take over
should a contact fail.
07 Verification Check
D
Acc.%
Max Current(A)
1-9
+/-2
0.5
10-90
+/-1
0.3
100-900
+/-1
100m
1-9k
+/-1
30m
10-90k
+/-1
3m
100-900k
+/-1
0.3
1-9M
+/-1
30u
10-90M
+/-2
3u

Monitor
User Manual
Test Report
1 ea
1 ea
1 ea
Power Adapter
Screws
Ground Cord
1 ea
2 ea
1
Part Included List
09 Package Include