ESI 5 Series Instruction Manual

ESRTP5RFWIFIP
5 Series WiFi Wireless
Programmable Room
Thermostat
Installing and using the ESi Centro App

Thank you for choosing ESi Controls.
All our products are tested in the UK so we are confident
this product will reach you in perfect condition and give you
many years of service. However, for additional peace of
mind, we recommend you register your product online at
www.esicontrols.co.uk/warranty for your extended warranty.
The RTP5RFWIFI thermostats only operate in the 2.4GHz
range. Please check that your router is broadcasting the
WiFi signal in the 2.4GHz range. If uncertain how to do
this please refer to your router manual to see how you can
make sure it’s broadcasting on a 2.4 GHz range.
Please refer to the help menu or visit our website for
instructions on how to set up your thermostat.
2

3
Downloading your Centro App 4
Pairing a device 5
Setting the Heating 8
Setting Holiday Mode 12
Pairing the Thermostat and Receiver 15
Abbreviation Menu 17
Contents

4
1. To get the App, search for ESi Centro in the App Store (iPhone) or
Google Play (Android devices).
Or visit our website: www.esicontrols.co.uk/centro.html
2. If you already have an account, then simply login using the email
address and password you registered with (Fig 1) OR if you haven’t
got a ESi Centro account, please tap ‘Create Account’ on the App
Login screen (Fig 2).
3. To create a new account:
• Enter a name you would like to display
• Enter a valid email address
• Enter a password
• Confirm password
4. Once you’ve created your account, then you’ll need to log in (Fig 1).
5. Check ‘Remember password’ to automatically login when opening
the App (Fig 1).
Downloading your Centro App
Fig 1 Fig 2

5
1. Press and hold (1) until the display shows tINE. Turn the dial (2)
until the display shows CoUP then press .
2. The symbol (3) will flash and - - - - will be displayed (4).
3. If not already done so, open the Centro App and log in.
4. In the Centro App, select the Heating Control (Fig 2) then tap
+ Add new device (Fig 3).
Pairing your device
1
2
3
4
Fig 1
Fig 3Fig 2

6
5. Enter the individual thermostat WiFi code (Fig 4) (this can be found
on the rear of the thermostat or in the box). Then tap Next.
6. Select your router and enter your router password (Fig 5). Then tap
Next and the App will search for the thermostat (Fig 6).
Fig 4 Fig 5

7
7.
Your thermostat should now be connected to your WiFi and the
symbol on your thermostat should be constantly on and the
App should display the configuration has been successful (Fig 7).
Fig 6 Fig 7

8
8. If the symbol on the thermostat is off or flashing and the App
displays it has failed to connect to the network (Fig 8) this means
the connection has not been completed. Please check carefully that
you have entered the correct 10-digit number in (Fig 4), and that
the correct WiFi password was entered (Fig 5), and the router is set
to the 2.4Ghz range then follow the instruction on the App and tap
‘retry’ (Fig 8).
Fig 8

9
Setting the Heating
1. Click the Heating Control tab (Fig 1).
2. If more than one thermostat is attached to the App, choose the
thermostat to adjust (Fig 2).
Fig 1 Fig 2

10
3. Choose between modes: Schedule, Manual or Off (Fig 4).
4. Set temperature by either swiping the number up or down, or use
the +or – (Fig 4).
5. Either click the Schedule tab, or Swipe Left to enter the Time and
Temperature settings (Fig 5).
6. Click the Menu button at the top right corner of the Schedule
page.
Fig 4 Fig 5

11
7. Choose between 7, 5/2 days or 24 hours, and either 4 or 6 events
per day (Fig 6).
8. To adjust a heating schedule, tap on the schedule to be changed
(Fig 7).
Fig 6 Fig 7

12
9. Choose the desired Temperature for the time period (Fig 8).
10. Click the Start button and adjust the Start Time, then click the
End button and set the desired End Time (Fig 8).
11. Click the Save button (Fig 8) to return to the Schedule page and
confirm changes (Fig 9).
Fig 8 Fig 9
Modify schedule successfully

13
Setting Holiday Mode
1. Click the Menu button at the top left hand corner (Fig 1).
2. Select and click into the Set Holiday tab (Fig 2).
Fig 1 Fig 2

14
3. Set the Departure and Return dates and times (it is recommended
to set the return date one day before your actual arrival date to
allow the house to return to its normal temperature) (Figs 3 & 4).
4. Once Departure and Return dates and times are set, click Save to
exit (Fig 4).
Fig 3 Fig 4

15
5. Select the desired Away Temperature (Fig 5).
6. Click the Activate Holiday Mode button and it will confirm
Departure and Return dates and times and display all thermostats
(Fig 7).
Fig 5 Fig 7

16
Pairing the Thermostat and Receiver
1. Press and hold the on the receiver until green and red lights
flash alternatively (Fig 1).
2. Press and hold on the Thermostat until the display shows tINE
(Fig 2).
3. Turn the dial on the thermostat until the display shows rF then
tap (Fig 3) until the display shows COUt (Fig 4).
N.B. The receiver and thermostat comes pre-paired, but if for some
reason the pairing is lost, please follow the section below to pre-
pair your thermostat and receiver.
Fig 1
Fig 3
Fig 2
Fig 4

17
7. Once the four numbers are displayed the thermostat is paired and
you can either wait 30 seconds for the thermostat to default back
to the main display or tap until you revert to the home screen.
5. Turn the dial until COUr is displayed, then tap (Fig 7).
6. A two digit number will be displayed followed by two flashing - -
(Fig 8).
4. Turn the dial until CFG is displayed then tap (Fig 5) until t-r is
displayed then press (Fig 6) which will revert back to the CFG
display.
Fig 5
Fig 7
Fig 6
Fig 8

18
Abbreviation Menu
tInE – used to set the time & date ProG – used to set the programmes CoPY – copy the day to the next LIGH – set the backlight permanently on/off tEcH – set the technical settings rF – set the rf functions CoUP – Couple thermostat to the WiFi rESE – reset the thermostat
dS – delayed start tPI – time proportional & integral SwG – adjust the swing AdJ – adjust nOP – number of programs SER – landlord feature COUT – use to pair with thermostat COUR – use to pair with rf receiver Room – room number CFG – function setup

19
WARNING:
Interference with sealed parts renders the guarantee void.
In the interests of continuous product improvement we reserve the right
to alter designs, specifications and materials without prior notice and
cannot accept liability for errors.
We are continuously developing our products to bring you
the very latest in energy saving technology and simplicity.
However, should you have any questions setting up your
controls please email us at [email protected].

Version 6.10.2
© ESi Controls Limited 2017