Espedeo Supra Supra-5000 User manual

Supra-5000
Digital Cinema and Secured Media
Projection System
Installation Manual
August 02nd, 2023
Before installing and operating the projector unit, please read this Installation Manual thoroughly

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 2 -
Table of Contents
1. About this Manual......................................................................................7
1.1. Using this Manual ..................................................................................................... 7
2. Safety .........................................................................................................8
2.1. General Safety .......................................................................................................... 8
2.2. Electrical Safety Precautions...................................................................................... 8
2.3. Terms ....................................................................................................................... 8
2.4. Laser Safety Precautions ........................................................................................... 9
2.5. Important Safety Instructions.................................................................................. 10
Preventing the Hazard of Electric Shock........................................................................................10
Preventing Fire.............................................................................................................................. 11
Preventing Personal Injury............................................................................................................11
Preventing damage to the Projector ............................................................................................. 12
Power cable and accessories.........................................................................................................12
About Repair................................................................................................................................. 13
2.6. Content of Hazardous Substances............................................................................ 14
2.7. Product Safety Labels.............................................................................................. 15
3. Product Introduction ................................................................................16
3.1. Unboxing Procedure................................................................................................ 16
3.2. Packing List ............................................................................................................. 17
3.3. Overview of the Projector ....................................................................................... 19
Air Filter........................................................................................................................................ 19
Projector Status Indicator ............................................................................................................. 20
Lens .............................................................................................................................................. 22
Adjustable Foot.............................................................................................................................23
Video Source and Interface panels................................................................................................ 23
3.3.5.1. Projector DCMB (Digital Cinema Media Block) Panel Connections.............................................................24
3.3.5.2. PIB (Projector Intelligence Board) Panel Connections................................................................................25
4. Installation of the Espedeo Supra-5000.....................................................27
4.1. Requirements for the Installation Environment....................................................... 27
Transport passageway and preparation of machine space............................................................27
Environmental Requirements .......................................................................................................27
Espedeo VM-1140 VESA Ceiling Mount .........................................................................................28
Power Requirements .................................................................................................................... 29
Requirements for Projection Window...........................................................................................30
Requirements for the Screen ........................................................................................................31
Strong / Weak Power Cabling (Power cord, signal cable, network cable, TMS, SMS automation
system cabling) ............................................................................................................................................ 31
4.2. Tools required for Installation ................................................................................. 32

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 3 -
4.3. Lens Installation...................................................................................................... 33
4.4. Instructions for Forward Installation ....................................................................... 34
4.5. Instructions for Ceiling Mounting ............................................................................ 34
4.6. Espedeo PM-2000B 3D System Installation.............................................................. 34
4.7. Network Setup (for Cinema users)........................................................................... 35
5. Powering Up the Espedeo Supra-5000 ......................................................36
5.1. Starting the Projector.............................................................................................. 36
5.2. Controlling and Operating the Espedeo Supra-5000................................................. 36
5.3. Overview of Supra Command Center Home Screen.................................................. 37
Switching ON the Laser Light Source .............................................................................................39
Projecting a Test Pattern............................................................................................................... 40
Switching to HDMI Playback .........................................................................................................41
6. Projector Settings .....................................................................................42
6.1. Installation →Macro Settings ................................................................................. 42
Editing the 2D-FLAT Macro............................................................................................................ 43
Editing the 2D-SCOPE Macro......................................................................................................... 43
Editing the 3D-FLAT Macro............................................................................................................ 44
Editing the 3D-SCOPE Macro......................................................................................................... 44
Creating a Custom 2D or 3D Macro ...............................................................................................45
6.2. Installation →Source File Settings .......................................................................... 47
6.3. Installation →Screen File Settings........................................................................... 48
6.4. Installation →Lens File Settings.............................................................................. 50
Auxiliary Adjustment for Lens Files ............................................................................................... 52
6.5. Installation →Color File Settings............................................................................. 53
6.6. Installation →Light Source File Settings.................................................................. 56
6.7. Installation →3D File Settings................................................................................. 57
3D File Settings for PM-2000B 3D System .....................................................................................58
6.8. Installation →Projector IP Address Settings............................................................ 59
6.9. Administrator Settings →Time Settings .................................................................. 60
6.10. Administrator Settings →Select Lens...................................................................... 61
7. DCMB Settings..........................................................................................62
7.1. DCMB Network Configuration ................................................................................. 62
7.2. DCMB Storage Configuration................................................................................... 64
7.3. DCMB Time Zone Setup........................................................................................... 66
7.4. Content Ingest Management................................................................................... 67
Content Ingest from a USB Drive................................................................................................... 67
Content Ingest from an FTP Server................................................................................................68
7.5. DCMB Audio Setup.................................................................................................. 69

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 4 -
7.6. DCMB Subtitles....................................................................................................... 71
7.7. DCMB Automation Setup ........................................................................................ 72
Automation setup for DCMB GPIO................................................................................................ 72
Automation Setup for eCNA Devices............................................................................................. 73
Automation Setup for JNIOR Devices ............................................................................................ 74
Automation Setup for Christie ACT Devices ..................................................................................75
Automation Setup for Dolby Devices ............................................................................................ 76
Automation Setup for USL DAX Devices ........................................................................................77
Automation Setup for USL JSD Devices .........................................................................................78
Automation Setup for AIB-2000 Audio IO Box .............................................................................. 79
7.8. DCMB 3D Settings for PM-2000B 3D System............................................................ 80
8. Component Engineering TA-10 Setup........................................................81
9. Espedeo Supra-5000 Input and Output .....................................................82
9.1. AES Audio and GPIO Pinout (DCMB) ........................................................................ 82
9.2. GPIO Power Details (DCMB) .................................................................................... 82
9.3. Audio Output from the Projector (DCMB)................................................................ 83
9.4. Audio Input to the Projector (PIB) ........................................................................... 83
HDMI Input ................................................................................................................................... 83
9.5. Examples of a complete Audio input/output solution (for 5.1/7.1 Audio formats).... 84
Audio I/O solution using AIB-2000 (suitable for connection to analog Amplifiers/Crossovers) ..... 84
9.5.1.1. Connection Requirements.........................................................................................................................85
Audio I/O solution using AIB-2000 (suitable for connection to digital Amplifiers).........................87
9.5.2.1. Connection Requirements.........................................................................................................................88
9.6. Technical Specifications of AIB-2000 Audio IO Box................................................... 90
10. Optical Correction.....................................................................................91
10.1. Lens Back Focus Adjustment.................................................................................... 91
10.2. DMD Convergence .................................................................................................. 94
11. Espedeo VM-1140 VESA Ceiling Mount.....................................................97
11.1. Introduction............................................................................................................ 97
11.2. Dimensions............................................................................................................. 98
11.3. Packing List ............................................................................................................. 99
11.4. Safety Instructions ................................................................................................ 102
11.5. Assembly and Installation ..................................................................................... 103
Height Adjustment...................................................................................................................... 113
12. Testing Procedures after Installation ......................................................115
13. Maintenance ..........................................................................................116
13.1. Preventive Maintenance Recommendations.......................................................... 116

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 5 -
13.2. Filter Components and Maintenance Intervals....................................................... 116
14. Switching Off the Espedeo Supra-5000 ...................................................117
15. Projector Specifications ..........................................................................118
15.1. Projector Dimensions............................................................................................ 118
15.2. Projector Base Dimensions.................................................................................... 118
15.3. Certifications......................................................................................................... 119

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 6 -
Thank you for purchasing the Espedeo Supra-5000 Digital Cinema and Secured
Media Projection System from Espedeo Holdings Ltd.
To ensure proper operation and to maximize the value of the Espedeo Supra-5000 Digital Cinema and Secured
Media Projection System, please review this Manual. It will guide you through all the features and benefits of the
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System.
COPYRIGHT NOTICE
Copyright © 2023 Espedeo Holdings Ltd. All rights reserved.
All trademarks listed in this manual are properties of their respective owners.
No part of this manual may be copied or distributed, transmitted, transcribed, stored in a retrieval system or
translated into any human or computer language, in a form or by any means, electronic, mechanical, photocopying,
recording, magnetic, optical, manual or otherwise or disclosed to third parties without prior written permission of
Espedeo Holdings Ltd.
MANUAL DISCLAIMER
There might be slight differences depending on the software version Espedeo products are running when compared to
the version available at the time of writing this manual. The contents, features and specifications stated in this manual
are subject to change without notice due to continuous product development and improvements. In no other event shall
Espedeo Holdings Ltd. be liable for any loss of profit or any other commercial damages, including but not limited to
special, consequential or other damages.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 7 -
1. About this Manual
1.1. Using this Manual
We highly recommend that you read this manual before you install and operate the Espedeo
Supra-5000 Digital Cinema and Secured Media Projection System. Within this manual, you
will find important information regarding safety, installation, maintenance and other important
notes which need to be considered while handling and using this unit.
Please take the time to read this Installation Manual carefully and keep it for future reference.

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 8 -
2. Safety
2.1. General Safety
▪The equipment shall be installed, operated and maintained by qualified professional
personnel authorized by Espedeo Holdings Ltd.
▪All warnings listed on this projector and in this manual should be observed.
▪Please strictly observe all instructions on operations and usage of the projector.
▪Please strictly observe all local installation specifications.
CAUTION:
The specifications described in this section are essential to ensure the performance of the
projector. Non-conforming operations will lead to warranty failure.
2.2. Electrical Safety Precautions
This equipment complies with safety standards stipulated for information technology equipment that
are subject to stringent requirements for the use of critical safety assemblies, components, materials
and insulators in order to protect users and operators from the following hazards:
▪Electric shock
▪Energy-related hazards
▪Fire
▪Heat-related hazards
▪Mechanical hazards
▪Radiation
▪Chemical hazards
2.3. Terms
A. Maintenance Personnel: Refers to those who have undertaken appropriate technical training
and have practical experience in avoiding potential hazards within their work range (including
but not limited to high-voltage electrical and electronic equipment and high-brightness projectors).
B. Users: Refers to all persons except maintenance personnel or personnel who have undertaken
appropriate technical training. Authorized users are allowed to operate professional
projection systems.
C. Restricted Access Area: Only Maintenance Personnel can enter the restricted access area or
only if a user is aware of the reasons for restricting access to the area and has taken preventive
measures. A person must use a specific tool, lock or key or take other safety measures to access
this area. Additionally, access to this area is controlled by the specified agency.

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 9 -
2.4. Laser Safety Precautions
This product is classified as Class 1 Laser Product and complies with IEC 60825-1: 2014 and
IEC 62471-5: 2015 Risk Group 2 (RG2).
To ensure safe operation, read all laser safety precautions mentioned below before installing and
operating the projector:
▪Class 1 Laser Product. DO NOT deliberately look or stare into the beam, which can cause injury
to the retina in the back of the eye.
▪This projector uses an extremely high brightness laser. Never attempt to look directly into the
lens or the light beam. The bright light may result in permanent eye damage. (Risk Group 2 of
IEC 62471-5:2015).
▪When switching ON the projector, make sure no one within the projection range is looking
into the lens.
▪Keep any reflective objects out of the light path of the projector. Glass and shiny surfaces can
reflect the light beam from the lens as the light path is extensive and the reflective beam can
cause unpredictable incidents such as fire hazards or eye injuries.
▪Any operation or adjustment not specifically instructed by the Espedeo Supra-5000 Manuals
creates the risk of hazardous laser radiation exposure.
▪Do not open or disassemble the projector as this may cause damage by the exposure
of laser radiation.
▪Failure to follow the control, adjustment or operation procedures may cause damage by the
exposure to laser radiation.

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 10 -
2.5. Important Safety Instructions
Preventing the Hazard of Electric Shock
▪The projector should use AC power. Ensure that the main voltage matches the rated power of
the projector. If the installation environment cannot meet the AC power requirements, please
contact the electrician.
▪The installation can only be carried out by qualified technical personnel in accordance with
local electrical codes and regulations.
▪This equipment uses a three-connector power cable, including a single-phase wire used for
protective earthing (PE). If the installation environment cannot meet the AC power
requirements, please contact the electrician. Please do not ignore the role of PE.
▪The power input socket delivered with the projector only supplies power to the projector. Do
not connect other devices to this power input socket.
▪The circuit breaker in the power supply circuit of the projector is a universal disconnector that
cuts off the power supply of the complete set of devices.
▪The projector is completely powered off only after you turn off the projector and remove the
power cable.
▪Do not place anything on the power cable. Please arrange the power cable properly so as not
to trip the pedestrian, be stretched or touch the hot surface.
▪If an extension cable must be used, the rated current of the extension cable shall be at least
equal to the rated current of the projector. If the rated current of the extension cable is lower
than that of the projector, the extension cable will be overheated and catch fire.
▪If the power cable is damaged or the projector is dropped and damaged, do not operate the
projector until the qualified maintenance personnel have checked and confirmed that
it is operational.
▪Please do not place any objects in the housing slot of the projector, as they may touch
dangerous voltage points or short circuits, causing a fire or an electric shock. If any liquid or
solid enters the housing, remove the plug and seek help from the professional maintenance
personnel before continuing to use the projector.
▪Please do not expose the laser light source to rain or moisture. It is recommended to place
the projector in a well-ventilated area away from fire and direct sunlight.
▪Please do not immerse the projector in water or other liquids, nor contact with water
(including splashing water) or other liquids.
▪To better protect the projector during lightning storms or prolonged unattended and unused
conditions, remove the power plug from the power socket and disconnect the communication
cables. This protects the projector from being damaged by a lightning strike or AC wire surge.
WARNING:
A large current leakage may occur. Therefore, the projector must be grounded properly
before it is powered ON.

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 11 -
Preventing Fire
▪The design and manufacture of the projector light source conform to the most stringent safety
requirements. During normal operating, the projector light source releases heat through the
outer surface and the ventilation duct, which is normal and safe. Putting the flammable
material near the projector may cause the material to ignite itself, causing a fire. Once a fire
occurs, be sure to use sand, CO2or dry powder fire extinguishers. Please do not use water to
extinguish a fire when an electrical fire occurs.
▪Please do not block the cooling fan of the projector, nor block the air exhaust vents around
the cold-water tank. Please do not place any flammable objects or materials around the laser
light source.
▪The projection room must be well ventilated or have a cooling device to avoid heat
accumulation. The hot air discharged from the projector must be able to be discharged to the
outside of the building.
▪Store the projector until the laser light source is completely cooled down. Before storing the
projector, unplug the power cable from the projector.
Preventing Personal Injury
▪To prevent personal injury and physical damages, please read the manual and understand
the meaning of all labels on the equipment before installing the light source kit, inserting the
power plug into the power outlet or commissioning the projector.
▪To prevent personal injury that would necessitate medical care, please exercise caution when
handling the projector because the laser light source is heavy.
▪Before installing the laser light source to the projector or removing the laser light source from
the projector, please turn off the power and unplug the power cable.
▪The "hazard distance of laser" needs to be evaluated for the actual application of the
Cinema products.
WARNING:
High-intensity light. Do not look into the lens. High brightness will cause damage to the eyes.
WARNING:
This is a Class A device that may cause radio interference in a residential environment.
In such conditions, the user may need to take practical countermeasures against interference.

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 12 -
Preventing damage to the Projector
▪In order to keep well air circulation and to ensure compliance with the Electromagnetic
Compatibility (EMC) requirements and safety requirements, be sure to use the projector with
all covers properly installed.
▪Properly keep the original shipping containers and packing materials. You can use them
again when you need to transport the equipment. To maximize the protection of the
equipment, re-package it in accordance with the original packaging upon factory delivery.
▪Before cleaning the equipment, remove the power plug from the power socket. Do not use
cleaners or spray cleaners, but use a damp cloth for cleaning. Do not use irritating solvents,
such as thinners, gasoline or corrosive cleaners, as they can cause damage to the housing.
You can use a damp cloth and a mild detergent to remove stubborn stains.
▪The maximum rated ambient temperature is 35ºC.
Power cable and accessories
▪Be sure to use the power cable, power plug and socket that comply with the local rating.
▪Please use only recommended AC power cables. Do not attempt to turn ON the power if the
AC power and the power cable are not within the specified voltage and power range.
▪Please use only the recommended accessories. Use of other accessories may cause fire,
electric shock or personal injury.
CAUTION:
Improper grounding, wiring or incorrect use of the projector will result in electric shock.
Ground Protection: The equipment shall be connected to a grounded power socket.
Before connecting the power supply, check the high-leakage current and ground cable.

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 13 -
About Repair
▪Please do not repair the equipment privately because opening or removing the protective
cover may expose you to high voltage and face an electric hazard.
▪If you attempt to change the internal control functions set upon factory delivery or to change
other control settings that are not specifically addressed in this manual, it will cause
permanent damage to the laser light source kit and void the warranty.
▪When the following situations occur, remove the power plug from the power socket and allow
qualified maintenance personnel to repair the equipment:
1. The power cable or power plug is damaged or worn out.
2. Liquid enters the equipment.
3. The equipment is exposed to rain or water.
4. If the equipment cannot operate properly in accordance with the operation instructions,
adjust only the adjustment apparatuses mentioned in the operating instructions because
improper adjustment of other apparatuses may cause equipment damage.
5. The equipment falls to the ground or the housing is damaged.
6. If the equipment performance deteriorates significantly, ask the maintenance personnel
for help.
▪Replacement parts: When parts need to be replaced, ensure that the service technician
uses replacement parts provided by the original factory or approved replacement parts that
are identical to the original parts. Unauthorized alternatives may result in deteriorated
performance and stability, causing fire, electric shock or other hazards.
Unapproved alternatives may void the warranty of the projector.

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 14 -
2.6. Content of Hazardous Substances
According to the "Electronic Information Products Pollution Control Management Approach" issued
for controlling and reducing the electronic information products that may cause environmental
pollution after discard, promoting the production and sales of low-pollution electronic information
products and protecting the environment and human health, the hazardous substances that may be
contained in this product are as specified in Table 1.
Table 1
NOTE:
In view of the different provisions of the EU and China for RoHS, the projector complies with the
EU RoHS directive (directive for restrictions on the use of certain hazardous substances in
electrical and electronic equipment).
WARNING:
Handling the power cable of this product can expose you to chemicals, including lead, known to
the State of California to cause cancer, birth defects or other reproductive harm. Proposition 65 is
a California law that mandates companies to inform consumers of California about minuscule
levels of chemicals found in their products sold and purchased within the state of California.
Though a product may contain a Proposition 65 warning label or marking, it does not mean the
product is a threat or danger to the consumer. Espedeo Holdings LLC is committed to the quality
and safety of our products and consumers and we comply with necessary government
requirements accordingly. For more information go to www.P65Warnings.ca.gov.

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 15 -
2.7. Product Safety Labels
I. Laser Warning Label: Describe the laser levels and compliance standards.
II. Label Description:
III. Label Position: Position of the laser warning label, as seen in Figure 1.
Figure 1: Laser Warning Label

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 16 -
3. Product Introduction
3.1. Unboxing Procedure
①Remove the top lid and open the Main box. Read the content on the Yellow ‘Transport Warning’
label on the carton flap carefully.
②Take out the Accessory box and Lens box located between the right and left foam inserts.
③Remove the left and right foam inserts on top of the projector.
④Lift and remove the Main box to access the projector. Please note that the Main box does not
have any bottom flaps.
⑤Lift the projector and place it on a surface that complies with the ‘Transportable Area’ instructions
specified on the ‘Transport Warning’ label.
Figure 2: Supra-5000 Unboxing procedure
NOTE:
Please retain the original packaging for possible RMA shipment in the future.

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 17 -
3.2. Packing List
When unboxing the Espedeo Supra-5000 package; please check the contents in the box against the
packing list mentioned in Table 2:
Sr.No.
Part Description
Quantity
①
Projector
Espedeo
Supra-5000
1 PCS.
②
Lens
Box
1.28-1.92:1
Standard
Lens#
1 PCS.
③
Accessories
Box
AES Audio
Cable (10M)
1 PCS.
④
GPIO Cable
(10M)
2 PCS.

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 18 -
⑤
RJ-45 to
25PIN Male
CP750/JSD80
Audio
Converter V2
1 PCS.
⑥
Cat5e Cable
(10M)
1 PCS.
⑦
Power Cord*
1 PCS.
⑧
SPB2 Top Cover Key
1 PCS.
⑨
Red Dot A4 leaflet
1 PCS.
⑩
User Manual
1 PCS.
⑪
Installation Manual
1 PCS.
⑫
Quick Installation Guide
1 PCS.
Table 2
*The required plug type for the Supra-5000 power cord can be specified as per regional requirements. Please refer to Section 4.1.4 for further details.
#1.28-1.92:1 Standard Lens is mentioned as an example. Please refer to Section 3.3.3 for the other lens options available for Espedeo Supra-5000.

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 19 -
3.3. Overview of the Projector
Figure 3: Supra-5000 Projector Overview
Air Filter
The Air Filter is located directly on the right side of the projector. This part can be replaced on-
site. The Air Filter is responsible for filtering the intake air and then cycle it through the projector
to cool the electronic components. The filter material has an open channel structure, adopts an
electrostatic electret material which is 100% synthetic fiber and is resistant to moisture and
common chemicals. This type of filter material is also mold resistant.
Maintenance Period: It is recommended to clean the filter screen every three months and
replace it with a new one every six months. Alternatively, adjust the replacement cycle
appropriately according to the on-site usage of the projector (refer to Section 13.2 for more details).
Figure 4: Air Filter

August 02nd, 2023
Espedeo Supra-5000 Digital Cinema and Secured Media Projection System
Installation Manual
- 20 -
Projector Status Indicator
The Status Indicator LEDs are located on the top panel of the projector and display only one
status at any given point in time. For example: when the projector is working properly, the Green
LED will be always ON. In case of any error or warning; the Green LED will turn OFF immediately
and the Yellow or Red LED should start flashing. Refer to Table 3 for the complete list of status
indicators for the Espedeo Supra-5000 projector.
Figure 5: Projector Status LED Indicators
SN
LED Color
LED Status
Projector
Status
Function
1
Green
Steady ON
Green
Power-on
The projector is working properly.
2
Green
Blinking Green
(fast)
Power-on
Process
The projector is booting with the AC power
or via the network wakeup function.
The indicator blinks fast. After the power-
on process with the AC power is
completed, the green indicator stops
blinking and becomes steady ON.
3
Green
Blinking Green
(slow)
Standby
mode
The projector is in Standby mode and can
be woken up by an external device through
the network. The blinking frequency is low.