OUTDOOR DIRECTIONAL ANTENNA TO RECEIVE DIGITAL
TERRESTRIAL TELEVISION DVB-T (UHF+VHF)
NOTE:
Inplaceswherewillbemadeholesinthewalltoattachthemastcannotrunelectrical
cables, water orgasinstallations etc.Before choosing amounting location forantenna
make sureor checkorcheck with theappropriate testers that inplaceofdrilling does not
runanyelectrical,gasorwaterinstallation,thereisnoplaceofwallplatesconnection,
therearenosteelorotherstructuralelementsofthebuilding.Incaseofanydoubt,
consult a specialist or administrator/owner of the building or consult the relevant
construction documentation.
Antenna installation:
1.
Fold the 3-pieceradiator
2.
Attheend of theradiator snapfasteners
3.
Mount the antenna receiver
4.
Install reflectors tothe transmitter
5.
Attachtheantenna tothe mastusingthesupplied bracket.
Theantennamustbemountedinastableandsafeway.Mountingmaybeslightly
different from the one described, depending onthetype ofmast, individual conditions
andplacesofassembly. Antenna cablemust besecurelyfastenedtothebuildingand
properly protected from damage. Antenna connector F-Type (notincluded inkit)must
beprotected from the weather conditions.
It is recommended to order a specialized antenna mounting service.
SPECIFICATIONS:
LTE Filter built-in
Impedance: 75Ct
Connector: TypeF
Forward gain: VHF: 5dB, UHF 15dB
Length: 72,5cm
Channels: UHF: 21-69, VHF 5-12
Frequency: UHF 470-790MHz, VHF 174-230MHz
(1)