ESSEN FLEXISPOT MT202A User manual

x1
A
>600mm
>450mm
554MM
415MM
45-405MM
480MM
680MM
Item No.：MT202A
Installation guide
Technical Data
Please do not exceed the maximum
WARNING bearing weight.
WAR NING
Table size:
Spare part
NO. Accessory
TOOLS
(not included)
0-1 2 K G
Max
STEP 1
STEP 2
WARNING
Please do not put hands near the
supporting bars to avoid any hurt
while the desk is lifting up and down.
1.Please take the packaging carton apart,
take out the product and put it on the
table.
CAUTION
Please place the product properly
according to size of it, or it may hurt you or
cause damage.
2.Please unlock the switch first after taking out
the product as the initial situation of the switch
is locked.
Lock switch
Locked Unlocked
Please push the switch to adjust it to a
desired height according to your situation.
When lifting the workstation, push the switch by your thumb and up the table with holding
both sides of table edges, then it will get next height ,locked asthmatically when you hearing
the voice.
When lowering the workstation, push the switch by your thumb and the loading will let it lower
from current height, locked it automatically when hearing the voice.
0~12Kg
45-405mm
Loading range
Height adjustment range

CAUTION
Please put the devices onto the
top of the workstation.
2
Please make sure all installed
equipments are on the table, and
not exceed the edge, or it may
hurt you or cause damage.
Please do not put hands near the supporting
bars, as they change during adjusting and
may hurt you.
Warning
How to take the workstation safely
Close lock switch
Attention
Please leave enough length of
cable for height adjustment
function, or it may hurt you or
cause damage.
Take the workstation
lock switch
Please push the lock switch inwards and make sure it is closed
to avoid losing its effect before taking it, or it will make
workstation flick suddenly. It will decrease the potential risks
after carrying workstation.
Locked
Lock switch
Unlocked
STEP 3