Gumdrop DropTech User manual

INSTALLATION
2
Press the other side of the keyboard down
to snap into the right side clip securely.
3
Push the keyboard forward until it is flush
with the front edge of the bottom case.
4
Carefully massage the rear corner clips
up and over device edge to snap onto
the keyboard.
5
Hook the top case rear PC clips up onto the
device bottom edge.
1
Slide the device keyboard under the
bottom case’s le side clip.
6
Press all 7 clips over the device, with
pressure from both sides, to snap into
place securely.
Congratulations on your new case!
GumdropCases.com

REMOVAL
CRITICAL!
FOLLOW STEPS 1 AND 2 IN ORDER
Failure to do so may result in
damage to the device.
1
Unhook the top case rear PC clips from the
device bottom edge.
2
Push the upper le and right side clips
outward to release the sides of the case
from the device.
4
Gently push the rear clips down to unhook
from the device.
5
Push the le and right side clips down
past the device, one side at a time, to
release it from the bottom case.
3
Gently hinge the top case up and off the
device to release it from the top clips.
GumdropCases.com