Essence Care@Home VPD User manual

PERS
Family
Pro
A smart emergency response
device with Intelligent Voice
Activation™
Care@Home™
Voice Panic Detector (VPD)
Call out the
trigger phrase
Press
Emergency Call Pull the cord out
In an emergency
SOS
OR OR
Getting Started

Open the VPD device
Move the VPD at least 2 m (6.5 ft.)
from the control panel
Insert the batteries and wait for
the control panel to beep
Press the Pairing button on
the Care@Home™control panel
Close the VPD
Installing the VPD
1
34
2
5
Pairing
Button
Control Panel
Tamper
pin
Tamper
switch
2 m (6.5 ft.)
Control Panel VPD
Hold here and
pull off the
back cover

On a wall
Press Emergency Call to test the VPD. The installation is complete.
Place in a convenient place,
like a living room table or
bedroom night stand.
Clean and dry the surface
Peel the strips off the
mounting tape and press
the VPD into place
Remove desk
mount
Insert the
cord
On a table
1
1
3
2
4

© 2018 All rights reserved to Essence SmartCare Ltd.
For more information, see: http://www.essence-grp.com/resources/smart-care-download.html
Legal notice: http://www.essence-grp.com/html/concerning_documents.html
www.essence-grp.com • [email protected]
LED
Speaker
Emergency button
Pull cord
Power supply
connector
Microphone
Wall Installation
Table Installation
ESUG05147 Rev. 1.0