Ethan Home 315B WINGBACK KING User manual

315B WINGBACK FULL & QUEEN & KING SIZE BED - HEADBOARD
1
This page lists all the contents included in the
box. Please take the time to identify the
hardware as well as the individual components
to this product. As you unpack and prepare for
assembly, place the contents on a carpeted or
padded area to protect them from damage.
Headboard Frame Right Wooden
Frame Left Side Panel
Bolt
1/4 x 50mm Flat Washer
Left Wooden Right Side Panel
Lock Washer Allen Wrench Back Cover
1 pc 1 pc 1 pc 1 pc 1 pc
10 pcs 10 pcs 10 pcs 1 pc 1 pc
ASSEMBLY INSTRUCTION

2
315B WINGBACK FULL & QUEEN & KING SIZE BED - HEADBOARD
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a
dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that
all connections are tight.
A
CB
D
E
J
Attached left & right Wooden Frame (B)(C) to the
Headboard (A) use Bolt (F), Lock Washer (H) and
Flat Washer (G). Turn the Allen Wrench (I) in Bolt
(F).
Attached left & right Side Panel (D) (E)
to the Headboard (A) use Bolt (F),
Lock Washer (H) and Flat Washer (G).
Turn the Allen Wrench (I) in Bolt (F).
Stick the Back Cover (J) on the back of the
Headboard (A).

ASSEMBLY INSTRUCTION
1
This page lists all the contents included in the
box. Please take the time to identify the
hardware as well as the individual components
to this product. As you unpack and prepare for
assembly, place the contents on a carpeted or
padded area to protect them from damage.
315B WINGBACK KING SIZE BED
1 pc
Footboard
Flat Washer
1/4"x 30mm
Side Rails Wooden Slat Wooden Leg Support Leg
Bolt
2 pcs 39 pcs 2 pcs 8 pcs
2 pcs 26 pcs 26 pcs 14 pcs 14 pcs
4 pcs 8 pcs 2 pcs
Allen Wrench
Lock Washer
1 pc
1/4"x 50mm
Bolt 1/4"x 75mm Bolt
Iron Pipe Single-Sided
Cover Double-Sided Cover

2
315B WINGBACK KING SIZE BED
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a
dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that
all connections are tight.
Adjustable
E
I
L
N
J
GH
C
H
G
C
C
Attached Support Leg (E) to the I-Iron Pipe
(F). Then assembly Iron Pipe (F) to
Footboard (A). Assembly Single-Sided Cover (G) , Double-Sided
Cover (H) and Wooden Slat (C) as shown, and pushed
into the hole on the Iron Pipe (F).
A
B
Attach Side Rail (B ) to the Headboard and Footboard (A ).
Attach Wood Leg (D ) to the Footboard (A ). Use Bolt (M),
Lock Washer (J ) and Flat Washer (I ) on both holes. Turn
the Allen Wrench (N ) in bolt (M).