Ethan Home E440C User manual

1
1 pc
Back Panel Left Panel Right Panel
ASSEMBLY INSTRUCTION
Back Rest Cushion
1 pc 1 pc 1 pc
1 pc
Seat Cushion
1 pc 1 pc 4 pcs
Bottom Panel Front Rail Wooden Leg
4 pcs
Flat Washer
Φ18mm x Φ9mm
1 pc
E440C CHAIR
16 pcs 8 pcs
4 pcs 4 pcs 4 pcs 1 pc
Spring Washer
Φ9mm 5/16" x 20mm
Bolt
5/16" x 40mm
Bolt
5/16" x 75mm
Bolt L-Metal Plate Allen Wrench
12 pcs
Flat Washer
Φ18mm x Φ9mm

2
E440C CHAIR
This page lists all the contents included
in the box. Please take the time to
identify the hardware as well as the
individual components to this product.
As you unpack and prepare for
assembly, place the contents on a
carpeted or padded area to protect
them from damage.
Zip off the zippers on Back Panel (A). Assemble Right Panel (C) & Left Panel
(B) to Back Panel (A) through the pre-drilled holes inside the 2 zippers on
Back Panel (A), using Flat Washer (I), Spring Washer (K) & Bolt (M), then
fastened using Allen Wrench (P) as illustration shown on the right column.
Next, assemble Wooden Legs (H) 2 each to the bottom of Right Panel (C) &
Left Panel (B) using Flat Washer (J), Spring Washer (K) & Bolt (N), then
fastened using Allen Wrench (P).
C
A
BA

3
D
Assemble Front Rail (G) with Right Panel (C) & Left Panel (B) using L-Metal
Plate (O), Flat Washer (J), Spring Washer (K) & Bolt (L) then fastened using
Allen Wrench (P) as illustration shown in the circled drawing, then put Bottom
Panel (F) to the Chair.
Place Seat Cushion (E) and Back Rest Cushion (D) on the Chair properly.
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant.
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Hardware may loosen over time. Periodically check that all connections are tight.
E440C CHAIR
A
B
C
B
G