Ethan Home 9067 User manual

TUFTED FULL & QUEEN BED - HEADBOARD
1
This page lists all the contents included in the
box. Please take the time to identify the
hardware as well as the individual components
to this product. As you unpack and prepare for
assembly, place the contents on a carpeted or
padded area to protect them from damage.
Headboard Frame Right Wooden
Frame Wooden Leg 1/4 x 75mm
Bolt
1/4 x 65mm Flat Washer
Left Wooden Bolt
Lock Washer Allen Wrench Slate
1 pc 1 pc 1 pc 2 pcs 2 pcs
10 pcs 12 pcs 12 pcs 1 pc 2 pcs
ASSEMBLY INSTRUCTION

2
TUFTED FULL & QUEEN BED - HEADBOARD
Cleaning & Care
Step 1: Attached left Wooden Frame (B) and right Wooden Frame (C) to the Headboard (A) use Bolt (F), Lock
Washer (H) and Flat Washer (G) on holes of Slates (J). Turn the Allen Wrench (I) in Bolt (F).
Step 2: Attached Wooden Leg (D) to the Wooden Frame (B) (C) use Bolt (E), Lock Washer (H) and Flat Washer
(G) on both of holes. Turn the Allen Wrench (I) in Bolt (E).
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a
dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that
all connections are tight.

TUFTED FULL & QUEEN BED - FOOTBOARD & SIDE RAILS
ASSEMBLY INSTRUCTION
This page lists all the contents included in the
box. Please take the time to identify the
hardware as well as the individual components
to this product. As you unpack and prepare for
assembly, place the contents on a carpeted or
padded area to protect them from damage.
1 pc
Footboard
I-Iron Pipe Flat Washer
1/4"x 30mm
Side Rails Wooden Slat Wooden Leg Support Leg
Single-Sided
Cover
Bolt
2 pcs 26 pcs 2 pcs 4 pcs
1 pc 26 pcs 13 pcs 8 pcs 8 pcs
2 pcs 4 pcs 2 pcs
Allen Wrench
Lock Washer
Double-Sided
Cover
1 pc
1/4"x 50mm
Bolt 1/4"x 75mm Bolt
3

Attach Side Rail (B) to the Headboard and Footboard (A).
Attach Wood Leg (D) to the Footboard (A). Use Bolt (M),
Lock Washer (J) and Flat Washer (I) on both holes. Turn
the Allen Wrench (N) in bolt (M).
TUFTED FULL & QUEEN BED - FOOTBOARD & SIDE RAILS
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a
dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that
all connections are tight.
A
B
G
H
G
C
C
Adjustable
E
I
L
N
J
Attached Support Leg (E) to the I-Iron Pipe
(F). Then assembly I-Iron Pipe (F) to
Footboard (A). Assembly Single-Sided Cover (G) , Double-Sided
Cover (H) and Wooden Slat (C) as shown, and pushed
into the hole on the iron pipe.
4