Kathy Ireland 1591VA-60-241-900-SR User manual

1
ATTACH YOUR RECEIPT HERE
Serial Number__________________ Purchase Date__________________
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at
1-855-571-1044 , 9 a.m. - 5 p.m., EST, Monday - Friday.
60-IN VANITY WITH TOP
OR
OPTION 1
(Semi-Recessed Sink)
OPTION 2
(Undermount Sink)
Español p. 27
MODEL #
1591VA-60-241-900-SR; 1591VA-60-241-900-UM; 1591VA-60-241-907-SR;
1591VA-60-241-907-UM; 1591VA-60-241-926-SR; 1591VA-60-241-926-UM;
1591VA-60-247-900-SR; 1591VA-60-247-900-UM; 1591VA-60-247-907-SR;
1591VA-60-247-907-UM; 1591VA-60-247-926-SR; 1591VA-60-247-926-UM
1591VA-60-241-900-SR Kathy Ireland Collection 1591 60 in Vanity White Painted Oak Veneer/Semi-recessed Carrara Marble Top
1591VA-60-241-900-UM Kathy Ireland Collection 1591 60 in Vanity White Painted Oak Veneer/Carrara Marble Top
1591VA-60-241-907-SR Kathy Ireland Collection 1591 60 in Vanity White Painted Oak Veneer/Semi-recessed Pure White Top
1591VA-60-241-907-UM Kathy Ireland Collection 1591 60 in Vanity White Painted Oak Veneer/Pure White Top
1591VA-60-241-926-SR Kathy Ireland Collection 1591 60 in Vanity White Painted Oak Veneer/Semi-recessed Engineered Calacatta Top
1591VA-60-241-926-UM Kathy Ireland Collection 1591 60 in Vanity White Painted Oak Veneer/Engineered Calacatta Top
1591VA-60-247-900-SR Kathy Ireland Collection 1591 60 in Vanity Cashmere Oak Veneer/Semi-recessed Carrara Marble Top
1591VA-60-247-900-UM Kathy Ireland Collection 1591 60 in Vanity Cashmere Oak Veneer/Carrara Marble Top
1591VA-60-247-907-SR Kathy Ireland Collection 1591 60 in Vanity Cashmere Oak Veneer/Semi-recessed Pure White Top
1591VA-60-247-907-UM Kathy Ireland Collection 1591 60 in Vanity Cashmere Oak Veneer/Pure White Top
1591VA-60-247-926-SR Kathy Ireland Collection 1591 60 in Vanity Cashmere Oak Veneer/Semi-recessed Engineered Calacatta Top
1591VA-60-247-926-UM Kathy Ireland Collection 1591 60 in Vanity Cashmere Oak Veneer/Engineered Calacatta Top
MODEL NUMBER DESCRIPTION

2
TABLE OF CONTENTS FOR OPTION 1 (Semi-Recessed Sink)
Package Contents...........................................................................................................................3
Hardware Contents..........................................................................................................................3
Safety Instructions...........................................................................................................................3
Preparation......................................................................................................................................4
Assembly or Installation Instructions...............................................................................................4
Change Door Panels (Optional)...................................................................................................11
Care and Maintenance...................................................................................................................12
Warranty.........................................................................................................................................12
Replacement Parts List.................................................................................................................13
TABLE OF CONTENTS FOR OPTION 2 (Undermount Sink)
Package Contents.........................................................................................................................15
Hardware Contents........................................................................................................................15
Safety Instructions.........................................................................................................................15
Preparation....................................................................................................................................16
Assembly or Installation Instructions..............................................................................................16
Change Door Panels (Optional)...................................................................................................23
Care and Maintenance..................................................................................................................24
Warranty........................................................................................................................................24
Replacement Parts List.................................................................................................................25

3
HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE)
PACKAGE CONTENTS (Semi-Recessed Sink)
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
• There are several assembly steps, including unpacking, that require two adults.
CAUTION
• Follow these instructions closely, take your time, and use care while assembling this vanity.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PART DESCRIPTION QUANTITY CARTON
A Vanity 1
B Top 1
D Sink 2
C Backsplash 1
Box 2 of 3
Box 1 of 3
Box 3 of 3
FLeft Door (preassembled
to vanity (A)) 2
Box 2 of 3
GRight Door (preassembled
to vanity (A)) 2
K Floor Plumbing Cutout Lid 2
I Left Shelf 1
J Right Shelf 1
L Wood Door Panel 4
E Sink Template 2
AA
Touch Up Pen
Qty. 1
Knob (2 Options of 241)
Brushed Nickel (Qty. 8)
Champagne Brass (Qty. 8)
BB
Knob (2 Options of 247)
Brushed Nickel (Qty. 8)
Matte Black (Qty. 8)
BB
Sink Template Sink Template
B
C
D
A
F
F
G
I
KL L L L
K
J
G
D
E
E

4
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Installation Time: 45 minutes (24 hours for silicone caulk to dry).
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone
caulk, power drill with drill bit, measuring tape, level
WARNING
Vanity (A) MUST be secured to wall.
Note: Clean area where the vanity (A) will be
permanently located prior to beginning installation,
ensuring the vanity (A) will not interfere with any
water supply and drain lines once mounted.
1. With two people, carefully place vanity (A)
against the wall in its final location.
While holding the vanity base firmly against the
wall, use the pre-assembled levelers on the
bottom of each leg of the vanity (A) to level the
item. Twisting the levelers counterclockwise
will raise the height of the vanity (A), and
twisting them clockwise will lower the vanity.
Once the vanity is in place, against the wall,
and level from front to back and side to side,
drill a hole through the vanity mounting area
and into the wall studs (as illustrated in
diagram 1). Using appropriate mounting
hardware (not included), secure the vanity (A)
to a wall stud. If possible, secure the vanity
(A) to two wall studs for increased stability.
1
12
A

5
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
2. Take out the top (B) and backsplash (C)
according to the steps indicated by the
drawings on the right, and place them face
up onto a scratch free surface such as a
foam sheet that came in the packaging.
Note: A
t this stage it may be easier to install
the faucet and drain kit (not included) to top (B)
per the manufacturer’s instructions, before
moving on to Step 3.
3.
Apply stain free silicone caulk (not included) to
the top edge of vanity (A). With the help of
another adult, gently lower top (B) onto the
vanity (A). Wipe away any excess caulk with a
soft cloth, and wait approximately 24 hours for
it to dry.
2
Remove the top foam sheet
Foam sheet
C
C
Remove the backsplash and place
it on a scratch free surface
Remove the foam sheet
B
3
1
2
2
A
B

6
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
4. Put the sink template (E) on the top (B).
The holes in the cardboard needs to be
aligned with the hole in the stone top.
Make sure the sink template and stone top are
flush along the back edge.
Repeat for the remaining sink template.
5. Apply a thin bead of silicone caulk (not included)
onto the stone top close to the edge of the sink
cut out as pictured.
Repeat for the remaining stone top.
4
Sink Template Sink Template
B
E
E
5
Sink Template Sink Template
B
E
E

7
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
7. Apply silicone caulk (not included) to unpolished
side and bottom of backsplash (C). Position
backsplash (C) on top (B) and against wall.
Clean any excess caulk before allowing
to dry.
6. With the help of another adult, Gently lower
the sink onto the stone top using even
pressure to set the sink properly.
Make sure the sink over-flow hole is at the
front of wood cabinet.
If some silicone caulk has over-flowed please
clean it up at that time with water.
Repeat for the remaining sink.
6
Sink Template Sink Template
B
D
D
7
1
22
C
B

8
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
9. From the front of the assembly, insert shelf
pins at desired height, ensuring they are
level. Place left shelf (I) on top of shelf pins.
Repeat for the remaining right shelf (J).
8. The back of the vanity is open for accessibility
for drain(s) and water line(s) hookup. If your
plumbing comes out of the back wall, insert
the floor plumbing cutout lid (K), as shown in
Illustration 8. This will close the hole and
increase your storage space.
If your plumbing comes out of the floor, this
hole provides accessibility for drain and water
line hookup.
8
K
A
9
1
I
2
J
2

9
10. If you need to adjust the doors, do so in the following manner.
To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws.
To adjust door left or right, turn screws (b) on both hinges, in and out.
To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws.
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
11. One set of knobs (BB) are packaged
separately in the box. If you would like to
switch knobs, simply remove the existing
knobs and attach the other finish, as
illustrated in the diagram.
Note: This vanity base comes with two
different knobs options.
BB
Hardware Used
Knob x 8
10
2
2
22
2
2
b
1
1
c
1
c
3
a
1
a
3
11
1
BB
2
F
F
G
G

10
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
Assembly is now complete. Install desired
faucet and drain assemblies (neither included)
per the manufacturers’ instructions to complete
the installation.
12. As shown in the diagram, fully extend the
drawer and locate the plastic levers on the
metal glide tracks. Push the left-side and
right-side levers at the same time to
disengage the drawer from the drawer glides.
Gently lift the drawer up to remove it from
vanity (A).
13. To reinstall drawer(s) into vanity (A), fully
extend metal glide tracks. Gently lower and
slide drawer box into rear glide catch. Next,
lower drawer box down to completely rest
on extended glides. Then, push plastic levers
to lock the drawer box in place.
Repeat for remaining drawers.
Note: Drawer box alignment can be adjusted,
if necessary. As shown in the diagram, spin
the adjustment wheel to the left to raise the
drawer box, or to the right to lower the drawer
box. The left and right-side glide heights can
also be adjusted independently in order to find
the drawers best alignment position.
CAUTION
DO NOT force drawer or damage to glide(s) may
occur. If drawer does not slide in with ease,
remove and try again from the start.
12
A
12
13
A
2
1
3