ETTRONE Lampo User manual

www.ettrone.com
Electric Scooter - User Manual

Lampo User Manual
Thanks for choosing your new ETTRONE electric scooter.
The Lampo is in a class of its own, combining a modern and
sleek design, powerful 500W motor and unique features.
Enjoy your ride!
*This user manual will guide you through important safety and performance information.
Read it before you take the first ride on your new ETTRONE scooter, and keep it for future reference.

Contents
1. Safety Reminder ..................................................................................................................... 01
2. Product Overview .................................................................................................................. 03
3. Packing List ............................................................................................................................ 04
4. Assembling Your E-Scooter .................................................................................................. 05
5. Button Instructions & Dashboard ........................................................................................ 09
6. Pre-Ride Checklist .................................................................................................................. 10
7. Warnings ................................................................................................................................. 12
8. Go Riding ................................................................................................................................. 15
9. Battery Information ............................................................................................................... 18
10. Specifications ....................................................................................................................... 22
11. Daily Care & Maintenance ................................................................................................... 25
12. Contact ................................................................................................................................. 27

1. Safety Reminder
01
Welcome
This e-scooter is a recreational vehicle which requires practice before riding it to its full potential.
ETTRONE and/or its subsidiaries and affiliates are not responsible for any property damage, personal
injury/death, accidents, or legal disputes caused by violations of the safety instructions presented in this
User Manual.
IMPORTANT
The combination of the safety alert symbols and the word WARNING in this manual indicates a
potentially hazardous situation which may result in injury, or is an alert against unsafe practices. Please
read this manual carefully and follow the recommendations.
To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, or
near steep inclines or steps, swimming pools or other bodies of water; always wear shoes and protective
gear including a helmet, and never allow more than 1 rider on board.

02
When riding in public spaces always follow and comply with the laws and regulations. Always allow
enough distance while braking; higher speeds require a longer distance to come to a stop. Always apply
the brakes gradually as sudden braking on low traction surfaces can cause the wheels to slip and
potentially fall. Always maintain a safe distance between you and other vehicles or pedestrians.
Always wear an approved helmet which fits properly while riding. Always slow down and yield the right of
way to pedestrians and overpass on the left if possible. Check for loose fasteners or hardware and/or any
damaged component. If the e-scooter is making an abnormal noise stop the vehicle immediately and
contact ETTRONE for assistance.
ETTRONE recommends riders to be 14 years of age or older to ride this e-scooter.
Riders below 18 years old should be accompanied by an adult.
Please read this manual carefully before you ride your e-scooter.

2. Product Overview
03
1. Light & Function Button
2. Power Button
3. Throttle Button
4. LED Display
5. Front Brake lever
6. Rear Brake Lever
7. Handlebar
8. Headlight
9. Hook
10. Stem
11. Stem Latch
12. Frame
13. Front Wheel
14. Reflector
15. Front Disc Brake
16. Foot Deck
17. Side Stand
18. Rear Disc Brake
19. Battery Unlock Screw
20. Charging Port
21. Rear Fender/Foot Brake
22. Tail & Brake Lights
23. License Plate Holder
24. Hub Motor
4
8
LED Display
Headlight
7
Handlebar
2Power Button
1Light & Function Button
3Throttle Button
6
5
Front Brake Lever
10
Stem
Frame
9Hook
Stem Latch
11
21
Battery Unlock Screw
Rear Fender / Foot Brake
22 Tail & Brake Lights
23 License Plate Holder
19
Charging Port
20
Hub Motor
24
12
Rear Brake
Lever
13
Front Wheel
14
Reflector
15
Front Disc
Brake
17
Side Stand
18
Rear Disc Brake
Foot Deck 16

3. Packing List
04
Verify that all items listed are included when unboxing your e-scooter. Verify that all parts are in good
condition. Retain all packaging materials and original box, in case you need to ship it in the future. Unplug
the charging cable before assembling and power off the e-scooter.
Electric Scooter
Qty: 1
Accesories
Charger
Qty: 1
T25 Wrench
Qty: 1
User Manual
Qty: 1

4. Assembling Your E-Scooter
05
Disassemble
Assemble
1. Unfold the pole and fasten the
folding lock.
2. Connect the two cables, which is
the communication wire between
display pcb and controller pcb.
Align the notch and connect.
3. Align the T-bar of the scooter
then insert it into the pole, use
the screw provided with the
scooter to install and fix it.
1. Loosen the screws that secure
the T-bar of the scooter.
2. Pull out the head of the scooter,
unplug the communication line
between the display and the
controller, the dismantling part of
the head of the scooter is complete.

06
How to Fold
1. Push the locking button upwards. 2. Open the stem latch.
3. Fold the stem. 4. Secure the hook to the rear fender.

07
Battery Removal & Installation
Remove the battery
1. Unscrew the deck cover screw
counterclockwise.
2. Lift the pedal cover from the
quick-release screw on the rear
wheel side.
3. Unplug the charging plug and the
power plug of the controller.
4. Lift the battery strap and take
out the battery.

Install the battery
1. Slide the battery vertically into
the scooter.
2. Connect the charging plug and
the power plug of the controller
to the battery.
3. Close the deck cover.
4. Install the screws and tighten
them clockwise.
08

09
5. Button Instructions & Dashboard
Riding Mode
LED Display
1. Power Button: Long press the power button to turn ON/OFF.
2. Accelerate: Gradually press the throttle button.
3. Brake: Release the throttle button, press the brake lever and/or step on the rear fender brake.
4. Short press the function button to select the riding mode:
- No “D” icon: Speed limit mode (minimum power/speed).
- White “D” icon: Standard mode (moderate power/speed).
- Red “D” icon: Sport mode (maximum power/speed).
5. Head & Tail Light: Short press the function button twice to turn ON the lights. Short press the button again to turn
OFF the lights.
NOTE: The electric throttle will deactivite while pressing the brakes.

10
6. Pre-Ride Checklist
ATTENTION
If you have any concern over the security of the product and/or there is a manifestation of a potential
fault, please stop using the product immediately and contact ETTRONE.
Make sure there are no disconnected cables, hardware and/or faulty components. Test all functional
parts like the frame, handlebar, tires, throttle, brake lights and make sure every system is operating
properly. Ensure that all locking devices are properly secured.
Test the brakes to ensure proper functioning. When you apply the electric brake lever or press on the
rear foot brake there should be proper braking response.
Check the Battery Level indicator to ensure adequate battery charge to complete your trip. If the
battery charge level is low, charge your e-scooter before riding.

11
Use proper closed shoes and protective gear. Always wear a helmet, knee pads, elbow pads and other
protection equipment. Do NOT ride barefoot or in sandals.
Your first ride should be in a traffic free environment without children, pedestrians, pets, vehicles,
bicycles, or other obstacles and potential hazards.
TIRE PRESSURE: Always check your tire pressure before riding. The recommended pressure is 36 PSI
measured in cold conditions. It is very important to maintain adequate air pressure in your tires. Riding
on low PSI can lead to making the tire more prone to punctures and leaks around the side wall. Low tire
pressure will also affect your RANGE substantially.
Get to know your e-scooter and feel comfortable and secure before riding in congested areas.
Review and follow local traffic laws and regulations for e-scooters before riding.

12
7. Warnings
ATTENTION
Not following the following instructions can lead to serious injury/death and damage.
DO NOT operate your e-scooter under the influence
of drugs, alcohol or medicines that may cause
impairment to ride safely.
DO NOT make calls and/or listen to music while riding.
Always wear an approved helmet, knee pads, elbow
pads and other protective gear.

13
Your e-scooter is designed for 1 (one) rider only.
DO NOT ride with a passenger.
DO NOT drive on public roads, motorways, or
highways. Severe personal injury or death can occur.
DO NOT drive through bumpy, uneven and/or
slippery roads at high speeds. DO NOT ride on roads
with more than 15 degrees of inclination.
DO NOT take your hands off the handlebar while
driving. Both hands must be grabbing the scooter
handlebar firmly at all times. DO NOT ride standing in
only one leg.

14
DO NOT ride with additional loads.
DO NOT carry objects on the handlebar.
Max Loading:
100 kg
Be alert! Pay attention to the road and/or obstacles.
DO NOT attempt any other activity while driving.
Control your speed while riding downhill as the
e-scooter may obtain higher than normal speeds.
DO NOT ride the e-scooter through obstacles that
can scratch the chassis as the friction between
metal and other surfaces can cause harmful and
dangerous sparks.
DO NOT drive in the rain. If there are puddles go
around them at low speeds.

15
Before riding carefully inspect
the scooter to ensure there is no
damage or loose parts.
8. Go Riding
WARNING
Always wear a helmet, knee pads, elbow pads
and other protective gear to avoid injury.
| 36 PSI