Euphree CITY ROBIN X+ User manual

Phone: [phone]
Website: www.euphree.com
Model X+
MANUAL
Step-Thru Electric Bike
STEP-THRU EBIKE CITY ROBIN X+

• Ebike
• Pedals (2)
• Charger
• Front wheel
• Tool Kit
• Keys
• Front headlight
• Thru axle
• Front wheel fender
• Seat post
• Saddle
• Reflectors & Phone
mount
• Cafe Lock
3| CITY ROBIN X+ +EUPHREE
City Robin
Model X+
ebike manual
The City Robin X+
includes the following
Step 1:
Survey components
Included in shipment, if there are any missing parts, please contact Euphree
HOW TO
ASSEMBLE YOUR CITY ROBIN X+
NOTICE:
THE FOLLOWING STEPS ARE ONLY A GENERAL GUIDE TO ASSIST IN THE ASSEM-
BLY OF YOUR EBIKE. THIS MANUAL IS NOT A COMPLETE NOR COMPREHENSIVE
MANUAL OF ALL ASPECTS OF ASSEMBLY, MAINTENANCE AND REPAIR. CON-
SULT A CERTIFIED, REPUTABLE EBIKE MECHANIC TO ASSIST WITH ASSEMBLY.
Step 2:
Register your ebike
Register your ebike to activate the warranty and link it to
your purchase by scanning the QR code or registering at
www.euphree.com/pages/bike-registration

Handlebar features:
The figure below shows the features of the handlebar
Mode Selector:
The image and table below show the features and information of the Mode Selector.
Display:
The image below shows the features and information of the full-color display.
Settings Menu:
To change display settings and functions, press and hold the UP and DOWN buttons to open
up the Settings Menu. Once in the Settings Menu press the UP and DOWN buttons to scroll
through. Press the POWER to select
Operations Directions
Turn on ebike Press and hold the POWER button
Turn on/off lights Press and hold the UP button
Increase pedal assist level Press the UP button
Settings Menu
•The settings, bike information, language, color themes, password, bluetooth and factory reset
may be accessed from the settings menu
Display Settings:
• The System menu is broken down into several sub-menus. Use the UP and DOWN buttons to cycle
through them, and use the POWER button to select each individual sub-menu.
• An explanation of each sub-menu is on the following page.
• Navigate to BACK to leave the menu.
Sub-menu Options Default Explanation
Unit Imperial/Metric Imperial Determines whether speed and distance is
measured in miles or kilometers
Auto Off Off to 5 minutes 5 Min Determine how long the ebike stays on
after last use
Trip Reset ON / OFF On Resets the trip odometer after each use
Brightness 30, 50, 75, 100% 100% Determines the screen brightness. 30% is
the darkest and 100% is the brightest.
Decrease pedal assist level Press the DOWN button
Display Settings Press and hold the UP / DOWN Buttons
Walk Mode Press and hold the DOWN button
Bluetooth
Signal Level
1, 2, 3, 4, 5 5 Determines the bluetooth signal strength
Start Strength 1, 2 1 Sets the program responsiveness. Start
strength 1 is more moderate whereas 2 has a
lot of pep and power.
Throttle ON/OFF ON Turns on the throttle for engagement.
Drive Mode Cadence or PAS
Torque Sensor
Torque
Sensor
Changes bike controller operating
mode from a torque sensor to a
cadence sensor

Factory Setting
• This menu is used to reset the bike back to factory default settings.
• After resetting to factory default settings, please go through each menu listed above to ensure that
everything is set correctly.
Navigate to EXIT to return to the home screen.
Information
• The System menu is broken down into several sub-menus. Use the UP and DOWN buttons to cycle
through them, and use the POWER button to select each individual sub-menu.
• An explanation of each sub-menu is ollowing.
• Password to change settings is 1801
• Navigate to BACK to leave the menu.
Sub-menu Options Default Explanation
Wheel Size 16 to 29 27.5 Set the wheel size to 27.5 inches
Speed Limit 0 to 30 mph 28 mph Max speed set to class III ebike speeds of
28 mph
Display info N/A - N/A
Error Code 1 - 9 codes N/A Various error codes
Languages
•English
•German
•Dutch
•French
•Italian
•Spanish
•Czech
Themes
Themes change the display system color scheme
•Theme 1
•Theme 2
•Theme 3
•Theme 4
Password
•The default password is 0000
•Set a start up password that must be correctly typed to start
•Reset password for reset
•Bluetooth unlock for app start
Bluetooth
•Scan QR Code to connect bluetooth