Eureka 3276AVZ User manual

What’s in the carton
STEP
1
1
Vacuum Body
Handle and
2 Screws
Power Paw®
Dusting Brush
Crevice Tool and
Extension Wand
Easy assembly
Slide handle onto vacuum body.
Place hose over hose hook.
Tighten two screws.
Some models: Secure bottom of
duster chamber to hose retainer.
Tighten with flat-head screw driver.
Push cord into cord retainer.
Wrap cord.
Push end of hose into duster
chamber. Place duster in chamber
and snap into place.
Place dusting brush
behind handle.
Snap Power Paw®
onto handle.
Place crevice tool &
wand in front of hose.
STEP
2
2
Get ready to vacuum
Plug into outlet. Step on
handle release to lower
handle into position.
If vacuum is hard to push,
raise carpet setting.
Adjust height for carpet
or bare floor.
Push power switch ( I) on.
Turn duster to extend.
Push firmly to collapse
and turn to lock.
Lift latch to remove dust
cup. Empty after each use.
To clean duster, press firmly
to snap into place. Turn on and
push lever down 10 seconds.
Attach Power Paw®
to end of wand or hose
for furniture and stairs.
STEP
3
3
Use a phillips
screw driver.
PROBLEM SOLVING
Refer to Owner’s Gui e.
MAINTENANCE SCHEDULE
Refer to back of ust cup or Owner’s Gui e.
REGISTRATION
OWNE ’S
GUIDE
Extra Belt
Important Safeguards
Self-Cleaning
Duster
Duster
Chamber
Stair Hose
SPECIAL FEATURES
Available on some models
QUICK START GUIDE
3270 Series
Before returning, call
Eureka Customer Service
HELPLINE
1-800-282-2886
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday
www.eureka.com
T
h
a
n
k
y
o
u
f
o
r
p
u
r
c
h
a
s
i
n
g
y
o
u
r
n
e
w
E
u
r
e
k
a
v
a
c
u
u
m
!
!
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts! Make sure power switch is in OFF (O) position before
plugging in power cord. Assemble the vacuum cleaner before using.
Bare Floor Nozzle
and Wand