Eureka 8800 Series User manual

QUICK START GUIDE
8800-8849 Series
What’s in the carton
STEP
1
1
Vacuum Body
Handle &
2 Screws
Extra Belt
Important Safe Guards
Easy assembly
Slide on handle.
Insert tab & rotate into position.
ighten two screws.
ighten two screws.
Place hose over duster temporarily.
Secure hose into hose retainer.
Wrap cord. Place dusting brush
behind handle.
Snap Power Paw®
onto handle.
Place crevice tool &
wand into tool caddy.
STEP
2
2
Get ready to vacuum
Step on handle release to
lower handle into position.
If vacuum is hard to push,
raise carpet setting.
Adjust height for carpet
or bare floor.
Plug into outlet and
push switch (I) on.
STEP
3
3
Use a phillips
screw driver.
PROBLEM SOLVING
Refer to Owner’s Gui e.
MAINTENANCE SCHEDULE
Refer to back of ust cup or Owner’s Gui e.
REGISTRATION
OWNER’S
GUIDE
Before returning, call
Eureka Customer Service
HELPLINE
1-800-282-2886
8 a.m. to 7:30 p.m. (CS ), Monday - Friday
10 a.m. to 6:30 p.m. (CS ), Saturday - Sunday
www.eureka.com
T
h
a
n
k
y
o
u
f
o
r
p
u
r
c
h
a
s
i
n
g
y
o
u
r
n
e
w
E
u
r
e
k
a
v
a
c
u
u
m
!
!
Power Paw®
Dusting Brush Self-Cleaning
Duster
Crevice ool &
Extension Wand
Stair Hose
SPECIAL
FEATURE
Available on
some models
ool Caddy
(Carrying Handle)
& 2 Screws
Empty dust cup
after each use.
Push power switch on, turn
knob to clean and activate
static charge for 10 seconds.
urn to extend. Push firmly
to collapse & turn to lock.
Attach Power Paw®
to end of wand or hose
for furniture or stairs.
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts. Make sure power switch is in OFF (O) position before
plugging in power cord. Assemble the vacuum cleaner before using.
PN80237A QS.qxp:English 11/16/08 4:44 PM Page 1