Eurolux SS-ST06074 User manual

Twisted Desk Lamp
Including: 1 x G9 maximum 40W
ILLUSTRATIONS
MODEL
MODELMODEL
ENVIRONMENTAL PROTECTION
Waste electrical & Electronic equipment regulations requires that any of our products showing this mark-
ing must not be disposed of with other household or commercial waste. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate any such products from
other waste types and recycle it responsibly at your local facilities.
T309SC
SS-ST06074
PRODUCT CODE
MODEL
Cape Town - 9 Racecourse Road, Milnerton, 7441
Johannesburg - 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065
www.eurolux.co.za
Please read instructions before commencing installation and retain for
future reference.

• Fitting: Steel with satin chrome nish. Frosted glass shade.
• Lamp type: Including: 1 x G9 maximum 40W.
• Voltage: 220V - 240V ~ 50Hz.
• Protection against electric shock: Class 2. Does not require earthing.
• IP Rating: IP20. Dust Protected. Protected against solid foreign objects of 12.5mm Ø and
greater. Not protected against water.
• Commercial / domestic use
• Not suitable for outdoor use.
• Maximum Ambient temperature range: 20ºC - 40ºC.
• Dimensions: (H) 425mm X (W) 240mm x (D)130mm.
• Before installation always ensure the power supply is turned off.
• Unpack and place the luminaire onto a at surface.
• Insert the Bulb.
• Plug into the electrical outlet.
• To switch the desk lamp on: Set the On/Off switch to (ON) position.
• To switch the desk lamp on: Set the On/Off switch to (OFF) position.
• Before unplugging the desk lamp from the power supply set the On/Off switch to
(OFF) position.
• Before replacing the lamp always unplug the desk lamp from the power supply
and allow to cool down.
• Ensure that the correct lamp type and wattage is tted.
T309SC - attachments:
If the external exible cable or cord of this luminaire is damaged, it should be exclusively
replaced by the manufacturer or his service agent or a similar qualied person in order to
avoid a hazard.
To ensure that you get maximum longevity and maximum use out of your luminaire, please
observe the following safety instructions.
Electrical products can cause death, injury, or damage to property.
Installation of the luminaire must be carried out by a qualied electrician, in accordance with
SANS 10142. On completion of installation, ensure that the Certicate of Compliance is
updated.
• Before connecting the luminaire, ensure that voltage indicated on the rating label
corresponds with the mains voltage in your home.
• When changing the lamp, ensure that the power is turned off.
• Ensure that the correct lamp type and wattage is tted.
• This luminaire is checked in full for conformity to the quality standards and safety
requirements.
• The manufacturer / supplier is not responsible for any damage of properties and persons,
caused by the incorrect use or installation of the luminaire.
• Should you be unsure of how to install this luminaire correctly, please consult a professional
electrician or your supplier for assistance.
• Ensure all items/ components, threads and screws are tightly secured.
IMPORTANT:
• Tampering with this luminaire, I.E. Using silicon sealers or incorrect cabling, will invalidate
your warranty.
• When the protection glass is damaged, it should be replaced immediately. The luminaire
must not be used without the protection glass.
• Please check whether the connection of the power cord is safe and reliable before
installation.
• If your mains wiring differs in any way from diagram, consult a qualied electrician.
• Always ensure that the mains supply voltage is correct.
• Always replace the lamp with one of an identical rating and wattage.
• Choking hazard: May contain small parts. Keep away from children.
• Do not insert your ngers or any part of your body into the electrical contact and sockets of
this product whilst it is connected to the electrical supply.
SPECIFICATIONS
IMPORTANT SAFEGUARDS
INSTALLATION
CLEANING
• Before cleaning always ensure the power supply is turned off.
• Do not immerse the luminaire in water.
• No abrasive products, solvents, detergent may be used to clean this luminaire.
• Ensure that the tting does not come in contact with corrosive chemicals, etc.
• Use a soft cloth to clean.
• Item may vary slightly from the picture on the carton.
• Coastal humidity may effect the longevity of the luminaire.
• Outdoor luminaires must be cleaned to prevent rust occurring.