
•Fitting: Steel & acrylic with translucent bronze PVC shade
•Lamptype: Excluding 1 x E27 maximum 60W 230V
•Voltage: 220-240V ~ 50/60Hz
•Protectionagainstelectricshock: Class 2. Does not require earthing.
•IPRating: 20. Protected against solid foreign objects of 12.5mm Ø and greater, not
protected against water.
•Notforoutdooruse
•MaximumAmbienttemperaturerange: 20ºC - 40ºC
•Dimensions: (H)525mm x (Ø)300mm
•Spareshade: N/A
•Feature: Inline switch
SPECIFICATIONS
IMPORTANT SAFEGUARDS
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.
T264B-attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced
bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletion
ofinstallation,ensurethattheCerticateofComplianceisupdated.
•Beforeconnectingtheluminaire,ensurethatvoltageindicatedontheratinglabel
corresponds with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Ensurethatthecorrectlamptypeandwattageistted.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafetyrequirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,
caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,I.E.Usingsiliconsealersorincorrectcabling,willinvalidate
your warranty.
•Whentheprotectionglassisdamaged,itshouldbereplacedimmediately.Theluminaire
must not be used without the protection glass.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliablebeforeinstallation.
•Ifyourmainswiringdiffersinanywayfromdiagramluminaire,consultaqualiedelectrician.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalratingandwattage.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Beforeinstallationalwaysensurethepowersupplyisturnedoff.
•Unpackonastableatsurfaceandassembleasperinstallationillustration.
•Insertthelampintothelampholder.
•Plugintotheelectricaloutlet.
•ToswitchtheTablelampon:SettheOn/Offswitchto(ON)position.
•ToswitchtheTablelampon:SettheOn/Offswitchto(OFF)position.
•BeforeunpluggingtheTablelampfromthepowersupplysettheOn/Offswitch
to (OFF) position.
•BeforereplacingthelampalwaysunplugtheTablelampfromthepowersupply
and allow to cool down.
•Ensurethatthecorrectlamptypeandwattageistted.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsof
this product whilst it is connected to the electrical supply.
•Itemmayvaryslightlyfromthepictureonthecarton.