Eurolux B46 User manual

Round Bulkhead with Eyelid
B46: Excluding 1 x E27 maximum 100W 230V
B57: Excluding 1 x E27 maximum 60W 230V
ILLUSTRATIONS
B46B / B46W / B57B / B57W
PRODUCT CODE
ENVIRONMENTAL PROTECTION
Waste electrical & Electronic equipment regulations requires that any of our products showing this
marking must not be disposed of with other household or commercial waste. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate any
such products from other waste types and recycle it responsibly at your local facilities.
Please read instructions before commencing installation and retain for
future reference.
Cape Town - 9 Racecourse Road, Milnerton, 7441
Johannesburg - 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065
email: [email protected], web: www.eurolux.co.za
L
N
L
Connecting the Terminal Block
Connect main supply (Brown = Live, Blue = Neutral)
into terminal block, ensuring all connections are
tight and secure.
Standard BulkheadG ridded / Covered Bulkhead
B46 B57

•Fitting: Die cast aluminium with frosted glass lens
•Lamp type:
B46: Excluding 1 x E27 maximum 100W 230V
B57: Excluding 1 x E27 maximum 60W 230V
•Voltage: 220V - 240V ~ 50Hz
•Protection against electric shock: Class 1. Requires Earthing.
•IP Rating: 54. Dust Protected. Ingress of dust not totally prevented, but will not penetrate in a
quantity to interfere with satisfactory operation or to impair safety. Protected against
splashing water.
•Commercialuse
•Suitableforoutdooruse
•Maximum Ambient temperature range: 20ºC - 40ºC
•Canbeusedincoastalareasandothercorrosiveenvironments
•Dimensions:
B46: (Ø)240mm x (D)110mm
B57: (Ø)180mm x (D)105mm
•Spare glass: B57: Code X175
Installation:
Switch the power off before commencing with the installation.
1.Fix the cable through the grommet of the lamp base, or by using the appropriate water
proof gland.Note the green/yellow wire should be connected to the earth terminal.
 2.Usetheplasticscrews,xthelampbasetothemountingsurface.
3.Connect the blue/brown wires to the L and N position of the lamp socket, and connect the
green/yellow wires to the lamp body where the earth symbol is placed.
4.Screw the lamp into the socket. The power of the lamp should not exceed the maximum
power which is rated.
 5.Mounttheuppercoverandxitinplacewiththescrews.
Changing the lamp:
Switch the power off before commencing with the installation.
1.Always ensure the lamp has been allowed to cool before attempting to change the lamp.
2.Open the luminaire cover.
3.Carefully unscrew the lamp.
4.Carefully screw in the new replacement lamp.
5.Close the luminaire, fastening any loose screws before re-connecting the electricity and
turning the luminaire on.
B46 / B57- attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced
bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletionof
installation,ensurethattheCerticateofComplianceisupdated.
•Beforeconnectingthisluminaire,ensurethatvoltageindicatedontheratinglabelcorresponds
with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafetyrequirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,
caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,IE.Usingsiliconsealersorincorrectcabling,willinvalidate
your warranty.
•Whentheprotectionglassisdamaged,itshouldbereplacedimmediately.Theluminairemust
not be used without the protection glass.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliablebeforeinstallation.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
SPECIFICATIONS
IMPORTANT SAFEGUARDS
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.
•Coastalareasensurethattheluminaireiscleanedfortnightly.
•Alwaysreplacethelampwithoneofanidenticalrating.
•Ensurethatyoudonotplacetheluminairenearanycombustiblematerialsand/orsurfaces.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsof
this product whilst it is connected to the electricity supply.
•Itemmayvaryslightlyfromthepictureonthecarton.
•Costalhumiditymayeffectthelongevityoftheluminaire.
•Outdoorluminairesmustbecleanedtopreventrustoccurring.
•Useacoppergreaseonallscrewsorstrings.