Eurolux B95 User manual

Square Bulkhead
B95 / B96: Excluding 1 X E27 maximum 60W 230V
B97 / B98: Excluding 1 X E27 maximum 100W 230V
B104 / B105: Excluding 2 X E27 maximum 60W 230V
ILLUSTRATIONS
B95 / B96 / B97 / B98 / B104 / B105
PRODUCT CODE
ENVIRONMENTAL PROTECTION
Waste electrical & Electronic equipment regulations requires that any of our products
showing this marking must not be disposed of with other household or commercial
waste. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate any such products from other waste
types and recycle it responsibly at your local facilities.
OFF
A
ON
F
1
2
12
UP
DOWN
B
NL
C
D E
Please read instructions before commencing installation and retain for
future reference.
Cape Town - 9 Racecourse Road, Milnerton, 7441
Johannesburg - 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065
web: www.eurolux.co.za
B95 B96
B105
B104
B98
B97

• Fitting: Die cast aluminium with frosted Glass
• Lamp type:
B95 / B96: Excluding 1 x E27 maximum 60W 230V
B97 / B98: Excluding 1 x E27 maximum 100W 230V
B104 / B105: Excluding 2 x E27 maximum 60W 230V
• Voltage: 230V-50Hz
•Protection against electric shock: Class 1. Require earthing.
• IP Rating:
B95/B96/B97/B98: 44 Dust Protected. Protected against solid foreign objects of
1.0mm Ø and greater. Protected against splashing water.
•Commercial use
•Suitable for outdoor use
• Maximum Ambient temperature range: 20ºC - 40ºC
Installation:
Switch the power off before commencing with the installation.
1.Fix the cable through the grommet of the lamp base, or by using the appropriate water proof
gland.Note the green/yellow wire should be connected to the earth terminal.
 2.Usethescrews,xthelampbasetothemountingsurface.
3.Connect the blue/brown wires to the L and N position of the lamp socket, and connect the
green/yellow wires to the lamp body where the earth symbol is placed.
4.Screw the lamp into the socket.The power of the lamp should not exceed the maximum power
which is rated.
 5.Mounttheuppercoverandxitinplacewiththescrews.
Changing the lamp:
Switch the power off before commencing with the installation.
1.Always ensure the lamp has been allowed to cool before attempting to change the lamp.
2.Open the luminaire cover.
3.Carefully unscrew the lamp.
4.Carefully screw in the new replacement lamp.
5.Close the luminaire, fastening any loose screws before re-connecting the electricity and
turning the luminaire on.
B95 / B96 / B97 / B98 / B104 / B105 - attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusivelyreplaced
bythemanufacturerorhisserviceagentorasimilarqualiedpersoninordertoavoidahazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletion
ofinstallation,ensurethattheCerticateofComplianceisupdated.
• Before connecting this luminaire, ensure that voltage indicated on the rating label corresponds
with the mains voltage in your home.
• When changing the lamp, ensure that the power is turned off.
• This luminaire is checked in full for conformity to the quality standards and safety requirements.
• The manufacturer / supplier is not responsible for any damage of properties and persons,
caused by the incorrect use or installation of the luminaire.
• Should you be unsure of how to install this luminaire correctly, please consult a professional
electrician or your supplier for assistance.
• Ensure all items/ components, threads and screws are tightly secured.
IMPORTANT:
• Tampering with this luminaire, IE. Using silicon sealers or incorrect cabling, will invalidate
your warranty.
• When the protection glass is damaged, it should be replaced immediately. The luminaire must
not be used without the protection glass.
• Please check whether the connection of the power cord is safe and reliable before installation.
• Always ensure that the mains supply voltage is correct.
• Always replace the lamp with one of an identical rating.
• Ensure that you do not place the luminaire near any combustible materials and / or surfaces.
• Choking hazard: May contain small parts. Keep away from children.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsofthis
product whilst it is connected to the electricity supply.
• Item may vary slightly from the picture on the carton.
SPECIFICATIONS
IMPORTANT SAFEGUARDS
INSTALLATION
CLEANING
• Before cleaning always ensure the power supply is turned off.
• Do not immerse the luminaire in water.
• No abrasive products, solvents, detergent may be used to clean this luminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.
• Coastal areas ensure that the luminaire is cleaned fortnightly.
•Can be used in coastal areas and other corrosive environments.
• Dimensions:
B95: (H)210mm x (W)210mm x (D)100mm
B96: (H)215mm x (W)215mm x (D)105mm
B97: (H)260mm x (W)260mm x (D)130mm
B98: (H)260mm x (W)260mm x (D)120mm
B104: (H)325mm x (W)325mm x (D)155mm
B105: (H)325mm x (W)325mm x (D)155mm
• Spare glass:
B95: Code: X404
B96: Code: X404
B97: Code: X405
B98: Code: X405
B104: Code: X406
B105: Code: X406