
RELEASE ER 2020_02_20
This document is property of Euroscreen Srl.
Any distribution, reproduction, copying or publication of this document is prohibited.
Installation and maintanance manual Projector Arm Mod. B-24
WARNING:
1) Before installing the bracket, check that you have assembled it correctly
according to all the mentioned steps.
2) Check that the ceiling is suitable to x and support the weight of the bracket
and the projector.
3) Maximum projector weight you can install with Projector Arm B-7 is 15 Kg.
4) In case some of the parts inside the packaging are missing, do not use
alternative components in order to x the projector but contact immediately your
dealer.
5) In case the instructions are not clear or if you have any doubt how to assemble
the bracket, please contact your dealer.
6) After the installation please keep all parts not used for a next installation.
3.1 MOUNTING EXAMPLE
3.0 MOUNTING THE PROJECTOR
Once xed the projector’s xing points, position the mounting plates “E” and “F”
on the projector’s chassis so that the centre of the projector arm will be the same
of the projector’s centre of gravity.
After this, x tightly the screws “L” and “M” to the mounting plates and x the
projector to the spider system using the appropriate screws for your projector.
Screws and washers to
mount the projector to
the spider system
Projector’s
xing points