Ipevo wireless presentation system User manual

Quick Start Guide
Wireless Presentation System Congratulations on your purchase of the Wireless Presentation
System (WPS). With the WPS, your projector can wirelessly
communicate with any WiFi-enabled computer or laptop in
order to project desktop contents quickly and efficiently.
This Quick Start Guide is intended to help you begin
immediately enjoying the benefits of wireless projection.
Your package should contain the following:
• WirelessPresentationSystem(WPS)Dongle
• UniversalPowerAdapter(DC5V)with5interchangeable
plugs
• VGAExtensionAdapter
• CD-ROMwithWPSsoftwareandfullUserManual
• QuickStartGuide(thisdocument)
Note: For a complete explanation of the features of WPS,
please refer to the user manual included on your CD-ROM.
The Wireless Presentation System is compatible with both
PCandMac.Followthesestepstosetupyourprojectorand
computer for wireless projection.
1. InserttheWPSDongleintotheVGAadapterontheback
ofyourprojector.Usetheblackgearsoneithersideofthe
dongle to securely tighten the screws of the unit into the
projector.
2.IfyourprojectorhasPoVGA(PoweroverVGA)technology,
apowersupplyisnotneeded.IfthereisnoPoVGA,attach
the power supply to the back of the dongle. Insert the
appropriate plug for your country/region into the adapter
firmly until the tab clicks into place. Tab may be slid down
inordertoremoveplug.
3. The projector will project a Startup screen. Important
information on this screen includes a Login code and the
ServerIPoftheWPS:192.168.100.10.
Setting up WPS
Contents
VGAport

1. OpenyouravailableWiFiInternetconnections,andchoose
“WPS-Dongle”toconnectwith.(Ifyouareunsurehow
toaccessavailableInternetconnections,pleaseseeuser
manual for more information.)
2.OpenyourInternetbrowser.TheWPSmainpage
mayappearautomatically.Ifnot,entertheServerIP,
“192.168.100.10,”intoyourbrowserandpressEnterto
navigatetothemainpage.
3.Click“Download”ontheWPSmainpage.Chooseeitherthe
WindowsorMacdownloaddependingonyouroperating
system. Follow the prompts to install the WPS software.
(Alternately,youcaninstallthesoftwarefromtheincluded
CD-ROM.)
Setting up your computer
1. Aftersuccessfulsoftwareinstallation,double-clicktheWPS
icon on your desktop to start the WPS client.
2.Aloginscreenwillappear:
 ·For“ServerIP”enter“192.168.100.10”(ifitdoesnot
already appear).
 ·For“UserName”enterwhateveryou'dliketoidentifythe
computer.
 ·For“LoginCode”enterthefour-digitlogincodedisplayed
on the projector Startup screen.
 ·ClickOkay.
3.Acontrolpanelwillappear.ClickthePlaybuttonto
enter full-screen projection mode. The projector will
automatically sync with your computer, and the contents of
your desktop will be projected in real time.
Communicating with WPS
WPS has the ability to simultaneously project up to four
desktops in split screen. This is useful for comparing data or
multimedia presentations.
To use split-screen mode, follow the steps just described for
eachofuptofourcomputers.However,insteadofpressing
the Play button (the final step), click on one of the four split-
screenbuttons(labeled1through4).Useadifferentnumber
for each computer to display them in the four different
sectionsoftheprojector'ssplitscreen.
Split-screen mode