Barco WGA-510P User manual

Wireless Presentation System
(Model Name: WGA-510P)
Version: 1.0
Date: 26, October 2016

WGA-510P
- -
2
1.Package Contents
WGA-510P Box
USB Token
Power Adapter (DC +5V, 2.6A)
WiFi Antenna x 2
Wall-Mount Kit
Quick Installation Guide
Warranty Card
CE DoC
2.USB Token Contents
MirrorOp Installer for Windows
MirrorOp Installer for Mac
Executable MirrorOp Application for Windows
Executable MirrorOp Application for Mac
SVS Driver (For Mac Extended Screen)
SNMP MIB File
User Manual
3.Physical Details
•Front Panel
Power LED LED Indicator: System Loading (Red), Ready (Green)
USB Port (Front) 2 USB Ports for USB Mouse and Keyboard
Power LED
USB Port

WGA-510P
- -
3
•Rear Panel
Antenna WiFi Antenna
USB Port (Rear) USB Port for USB IWB Device (HID Type)
RJ-45 10/100M RJ-45 Port
VGA VGA Connector
HDMI HDMI Connector
Audio Jack Audio Jack (3.5mm)
Power Jack Power Jack (5V/2.6A)
♦Each USB port can supply up to 5V/0.5A to the touch device/USB drive.
•Bottom Side
Description
Screw Hole Screw hole for the wall-mount kit
Reset Button Press the Reset button and the Power button on the
device to execute hardware reset.
Reset Button
Screw Hole
(for the Wall-Mount Kit)
Power Jack
VGA
RJ-45
Antenna
HDMI
Audio Jack
USB Port

WGA-510P
- -
4
4.What You Might Need
Projector/Display with VGA/HDMI Interface
Windows or Mac PC/Laptop
Apple iPhone, iPad or iPod Touch
Android Phone or Tablet
Speaker (Optional, for Audio Projection)
USB Mouse and Keyboard (Optional, for Remote Desktop)
USB HID Touch Screen/IWB Device (Optional, for USB over IP)
5.Quick Installation
1) Connect the WGA-510P box to the projector/display through the VGA/HDMI
port and turn on the projector/display power.
2) Connect the power adaptor to the WGA-510P box. The system will be ready
when the LED light turns green.
The default standby screen as shown below will be displayed when the
system is ready.
3) Insert the speaker cable to the WGA-510P audio jack for audio output
(Optional when using VGA).

WGA-510P
- -
5
6.Windows
Do not support Windows Phone, Windows RT.
6.1 Install the application
1) Make sure your PC is WiFi-enabled, and connect your PC to the
WGA-510P box through WiFi. You can find the WiFi network name
(SSID) of your WGA-510P box on the standby screen of the
projector/display.[Default SSID is WGA-510P]
2) Open your browser, and enter the IP address of your WGA-510P box in
the address bar of the browser. You can find the IP address on the
standby screen of the projector/display. [Default IP address is
192.168.100.10]

WGA-510P
- -
6
3) Download the software (i.e. “MirrorOp”) for “Windows 7 / 8 / 10”, and
follow the Setup Wizard to install the software. (You can also install the
“MirrorOp” software from the USB token directly.) Make sure the
software is not blocked by your firewall.
6.2 Start the application
1) Click the MirrorOp icon on the desktop to execute the application,
or launch the MirrorOp application from the USB token directly.
2) It will start to search for the WGA-510P device automatically.

WGA-510P
- -
7
3) Click on the WGA-510P device and enter the login code shown on the
display.
4) Click the “PLAY” button to start the screen sharing.

WGA-510P
- -
8
7.Mac
7.1 Install the application
1) Make sure your Mac is WiFi-enabled, and connect your Mac to the
WGA-510P box through WiFi.
2) Open your browser, and enter the IP address of your WGA-510P box in
the address bar of the browser. You can find the IP address on the
standby screen of the projector/display. [Default IP address is
192.168.100.10]
3) Download the software for “Mac 10.9~10.11”, and you will see a DMG
file with a MirrorOp icon .

WGA-510P
- -
9
4) Drag the MirrorOp icon into the Applications folder.
7.2 Start the application
1) Click on the MirrorOp icon from the Applications folder to execute the
application.
2) It will start to search for the WGA-510P device automatically.
3) Click on the WGA-510P device and enter the login code shown on the
display.

WGA-510P
- -
10
4) Click the “PLAY” button to start the screen sharing.
Safety :
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.