EVA king timber bed frame User manual

A guide to your
Timber Bed Frame

What comes with your
king timber bed frame
2
9x Legs
6x Frame hand screws
6x Headboard hand screws
9x Washers
9x Thin felt pads
3x Thick felt pads
Box 1/4
20x Slats

3
1x Top rail
1x Middle rail
1x Bottom rail
Box 2/4
What comes with your
king timber bed frame

4
1x Headboard
Box 4/4
Box 3/4
1x Left rail
1x Right rail
1x Long middle rail
What comes with your
king timber bed frame

Before you begin, make sure to
choose a spot for your timber bed
frame against a wall.
5
Please contact our customer experience team if
you cannot place your bed frame against a wall.

1.
Line up middle rails (A-A) and screw
3x legs in. Set aside.
A
A
Optional: Stick thin felt pads onto
underside of legs. We recommend
this for timber or hard floors.
6

2.
B
B
C
C
E
E
Line up top (B-C), bottom (D-E), and
side rails (B-D, C-E) together.
Match the letters
and have the top rail
closest to the wall
D
D
7

3.
Optional: Stick thin felt pads onto
underside of legs. We recommend
this for timber or hard floors.
Screw 6x legs into corners and
sides to secure together.
8

4.
Flip frame upright.
9

5.
Place previously assembled section
onto frame.
10

6.
Secure together using 6x frame hand
screws with washers.
Frame Head
board
11

7.
Place headboard onto frame.
12

8.
Secure bottom of headboard using 3x
washers and headboard hand screws.
Frame Head
board
13

Secure back of headboard using 3x
headboard hand screws.
Frame Head
board
9.
14

Stick 3x thick felt pads to the back
side of the headboard to protect
your wall.
10.
15

Place slats on and enjoy!
Caution: Avoid standing on slats.
11.
16

Pretty simple living .