EVA single timber bed frame User manual

A guide to your
Timber Bed Frame

What comes with your
single timber bed frame
2
5x Legs
2x Frame hand screws
4x Headboard hand screws
4x Washers
5x Thin felt pads
2x Thick felt pads
Box 1/4
10x Slats

3
1x Top rail (A-B)
1x Middle rail
1x Bottom rail (C-D)
Box 2/4
What comes with your
single timber bed frame

4
1x Headboard
Box 4/4
Box 3/4
1x Side rail (B-D)
1x Side rail (A-C)
What comes with your
single timber bed frame

Before you begin, make sure to
choose a spot for your timber bed
frame against a wall.
5
Please contact our customer experience team if
you cannot place your bed frame against a wall.

6
1.
Screw 1x leg into middle rail.
Set aside.
Optional: Stick thin felt pads onto
underside of legs. We recommend
this for timber or hard floors.

7
2.
B
B
A
A
E
E
D
D
Line up top (A-B), bottom (D-E), and
side rails (B-D, A-E) together.
Match the letters
and have the top rail
closest to the wall

8
3.
Screw 4x legs into corners to
secure together.
Optional: Stick thin felt pads onto
underside of legs. We recommend
this for timber or hard floors.

9
4.
Flip frame upright.

5.
Place previously assembled section
onto frame.
10

6.
11
Secure together using 2x frame hand
screws with washers.
Frame Head
board

12
7.
Place headboard into frame.

13
8.
Secure bottom of headboard using 2x
washers and headboard hand screws.
Frame Head
board

14
9.
Secure back of headboard using 2x
headboard hand screws.
Frame Head
board

15
10.
Stick 2x thick felt pads to the back
side of the headboard to protect
your wall.

16
11.
Place slats on and enjoy!
Caution: Avoid standing on slats.

Pretty simple living .