EVA Slideaway Sofa Bed User manual

A guide to your
Slideaway Sofa Bed

Life is better together.
Please assemble with
two people.
Life is better together.
Please assemble with
two people.

3
What comes with your
Slideaway Sofa Bed
Back/Arm box
1x Back/arm frame
1x Short leg
2x
10x
Long legs
Hand screws
You should have 4 boxes in total.

4
What comes with your
Slideaway Sofa Bed
Cushions box
Seat insert
Back insert
Back cushion insert
Side cushion insert
1x
1x
2x
2x
Base box
Base frame
1x

5
What comes with your
Slideaway Sofa Bed
Cover box
Seat cover
Back cover
Back cushion cover
Side cushion cover
1x
1x
2x
2x

5
Before you begin assembling we recommend
thoroughly cleaning the floor where your Slideaway
Sofa Bed will sit to ensure no debris gets trapped
under the sliding legs.

1.
Place the frame upright, unfold the
arms and set aside.
6

2.
Lay the base frame on the ground upside down and
look for the L engravings in the wood.
Screw in 3x legs. Then flip it over.
7
Long leg
Short leg here
Screw in the legs.

3.
Slide the base frame towards the
back/arm frame.
8
Holes against
the back/arm
frame
Note: Be careful flipping the base as the slats may slide out.

4.
Screw in from
underneath.
Use the holes on
the base to locate
the screw.
9
From behind the frame, screw in 2x
hand screws into the base frame to
attach it to the back/arm frame.
Lift the base to align the holes before screwing.

5.
Screw 8x hand screws into the base.
Your frame is now complete.
We recommend pulling the slats out for visibility.
10
Screw in from
underneath.
Use the holes on
the base to locate
the screw.

6.
11
From the cushions box, remove the
vacuum-sealed cushions.
Make sure your cushions are on a spacious flat
surface, as they will start to expand once the
vacuum seal is broken.
Open the vacuum-seal carefully with scissors.
1. 2.
Note: Do not use a knife to cut open the plastic.

7.
12
Make sure the mattress cover and mattress seat
insert line up before moving to the next step.
Zipper label should align with the zipper line once
the covers are on.
Make sure the quilted, round edge of the mattress
seat insert is inserted first.
Align the covers to the mattress seat.
Note: The edge of the cover with two zips is facing downwards
towards the floor.
Zipper

8.
13
Align and adjust.
Note: Curve the mattress before putting on covers for
1. 2.
easier assembly.
Ensure you align the corners of the insert to the
corners of the cover for an even, unwrinkled look.

9.
14
Align the covers to the mattress back.
Repeat steps 7 and 8 for the back insert.
Zipper

10.
15
Zip up both mattresses covers.
Press the mattress
insert down with
one hand and use
the other to zip up
the cover.
1.
2.
Bring each side of
the cover up and
pull together to
make zipping
easier.

11.
16
Zip the mattresses together.
Make sure you align the mattresses together
before zipping them to each other.
Start
here
End
here

12.
17
Place covers on back cushions.
Zipper
Note: Zipper label should align with the zipper line once the
covers are on.
Ensure you align the corners of the insert to the
corners of the cover for an even, unwrinkled look.

13.
18
Align and adjust.
Squeeze the cushion insert before putting on the
covers for easier assembly.

14.
19
Put the covers on side cushions.
Repeat steps 12 and 13 for the back cushions and
side cushions.
Zipper