Evans Evaglide ROMAN User manual

1
BI DIRECTIONAL
INSTRUCTIONS
EVAGLIDE BATTERY
ROMAN BLINDS
Version 1.0

For more guides and videos visit www.evans-textiles.com/resources
2
Here to help
At Evans, we understand the importance of getting things right for you and your clients.
That’s why we’ve put together this easy to follow step-by-step guide to help make things
easier for you.
In this guide we’ll cover product types, assembly information and chronologically set out
the instructions on how to put the product together. The guide is part of the ‘Evans
Difference’ giving our customers expert support which is designed to be easy to follow
and hassle free.

For more guides and videos visit www.evans-textiles.com/resources
3
To connect remote to headrail
•Choose channel required on remote if a multi-channel remote.
•Press button located on motor for around 2 seconds –Motor will shunt –release
button after 1st Shunt.
•(This button is located in a small hole next the wire coming out of the motor)
•You will also get this shunt when you first connect the battery to the motor.
•Within 10s Press and Hold Stop button for around 2 seconds until the motor shunts.
•Remote is now paired to Motor.
To Set Limits
•Immediately after pairing the remote you will go into limit setting mode.
•Press the UP button once to move the blind up in Jog mode. (Short movements)
•Press and hold the UP button and the blind will move continuously.
•Press STOP when at the desired limit.
•Press and Hold STOP and UP together until the blind shunts. Upper limit is now set.
•Press the DOWN button once to move the blind down in Jog mode. (Short
movements)
•Press and hold the DOWN button and the blind will move continuously.
•Press STOP when at the desired limit.
•Press and Hold STOP and DOWN together until the blind shunts. Lower limit is now
set.
To Set middle Position
1. Move blind to position you want to be the middle and press stop.
2. Press P2 button –blind will shunt.
3. Press stop blind will shunt. Press stop again and blind will shunt.
4. Limit is now set.
5. To move to middle position, hold the stop button for around 2-3 seconds.

For more guides and videos visit www.evans-textiles.com/resources
4
To copy to another remote
•Remote A = remote already paired –remote B = Remote we wish to copy to.
•While on remote blind is paired to press P2 on remote. Blind will shunt. Press P2
again and blind will shunt.
•Press P2 on Remote B. Blind will shunt. Channel A is now copied onto remote B.
To copy to another channel
•Channel A = Channel already paired –Channel B = Channel we wish to copy to.
•While on channel blind is paired to press P2 on remote. Blind will shunt. Press P2
again and blind will shunt.
•Change to required channel.
•Press P2 on Channel B. Blind will shunt. Channel A is now copied onto Channel B.
To remove all settings (This will remove pairing to remote)
Press and hold button in Motor until 4th Shunt.
To change motor direction
Press and hold button in motor until 3rd Shunt.
•To Fine Tune Limits after initial setting
•Upper Limit –Press and hold STOP and UP together until blind shunts.
•Press UP or DOWN until at desired limit.
•Press UP AND STOP together until blind shunts. Upper limit now reset.
•Lower Limit –Press and hold STOP and DOWN together until blind shunts.
•Press UP or DOWN until at desired limit.
•Press DOWN AND STOP together until blind shunts. Lower limit now reset.
Adjust motor speed (please note factory default is at fastest speed)
•Press P2 button on remote. Blind will shunt.
•Press UP to increase speed OR press DOWN to decrease speed. Blind will shunt.
•Press UP to increase speed OR press DOWN to decrease speed. Blind will shunt
again.
•If no shunt, then Motor is already running at that speed.

For more guides and videos visit www.evans-textiles.com/resources
5
Evan Textiles (Sales) Ltd, Helmet Street, Manchester, M1 2NT
Registered in England No. 6186585 Part of the Evans Group of Companies