Everdure DWF146SC1 Guide
MODELS INCLUDE
INSTALLATION, OPERATION
& MAINTENANCE INSTRUCTIONS
FOR EVERDURE DISHWASHERS
DWF146SC1
DWF146PC1
DWF146WC1
Read th Manual
� Before Cang for Seice
NOTE:
Q
G
Thisappliancemustbegrounded.Intheeventofa
malfunctionorbreakdown,groundingwillreduce
theriskofanelectricshockbyprovidingapathof
leastresistanceofelectriccurrent.Thisappliance
isequippedwithacordhavinganequipment-
groundingconductorandagroundingplug.
Theplugmustbepluggedintoanappropriateoutlet
thatisinstalledandgroundedinaccordancewith
alllocalcodesandordinances.
Whenusingyourdishwasher,followtheprecautionslistedbelow:
Improperconnectionoftheequipment-grounding
conductorcanresultintheriskofanelectricshock.
Checkwithaqualifiedelectricianorservice
representativeifyouareindoubtwhetherthe
applianceisproperlygrounded.Donotmodifythe
plugprovidedwiththeappliance;Ifitdoesnotfit
theoutlet.Haveaproperoutletinstalledbya
qualifiedelectrician.
Keepchildrenawayfromdetergentandrinseaid,
keepchildawayfromtheopendoorofthe
dishwasher,therecouldstillbesomedetergentleft
inside.
ren
Donotabuse,siton,orstandonthedoorordish
rackofthedishwasher.
Donottouchtheheatingelementduringor
immediatelyafteruse.
(Thisinstructionisonlyapplicabletomachines
withavisualheatingelement.)
Donotwashplasticitemsunlesstheyaremarked
dishwashersafeortheequivalent.Forplasticitems
notsomarked,checkthemanufacturer's
recommendations.
Useonlydetergentandrinseadditives
designedforanautomaticdishwasher.
Neverusesoap,laundrydetergent,orhand
washingdetergentinyourdishwasher.Keep
theseproductsoutofthereachofchildren.
Donotplaceanyheavyobjectsthe
doorwhenitisopen.Theappliancecouldtip
forward.
onorstandon
Whenloadingitemstobewashed:
1)Locatesharpitemssothattheyarenotlikely
todamagethedoorseal;
2WARNING:KNIVESANDOTHERUTENSILS
WITHSHARPPOINTSMUSTBELOADEDIN
THEBASKETWITHTHEIRPOINTSDOWN
ORPLACEDINAHORIZONTALPOSITION.
)
Whenusingyourdishwasher,youshould
preventplasticitemsfromcomingintocontact
withtheheatingelement.(Thisinstructionisonly
applicabletomachineswithavisualheating
element.)
Checkthatthedetergentcomparmentisempty
aftercompletionofthewashcycle.
Donotoperateyourdishwasherunlessall
enclosurepanelsareproperlyinplace.Open
thedoorverycarefullyifthedishwasheris
operating,thereisariskofwatersquirtingout.
Duringinstallation,thepowersupplymustnot
beexcessivelyordangerouslybentorflattened.
Donottamperwithcontrols.
Ifthesupplycordisdamaged,itmustbereplaced
bythemanufactureroritsserviceagentora
similarlyqualifiedpersoninordertoavoida
hazard.
Pleasedisposeofpackingmaterialsproperly.
Usethedishwasheronlyforitsintendedfunction.
Removethedoortothewashingcompartmentwhen
removinganolddishwasherfromserviceordiscardingit.
WARNING:SOMEDISHWASHERDETERGENTSARE
STRONGLYALKALINE,THEYCANBEEXTREMELY
DANGEROUSIFSWALLOWED.AVOIDCONTACT
WITHSKINANDEYESANDKEEPCHILDRENAWAY
FROMTHEDISHWASHERWHENTHEDOORIS
OPEN.
Theapplianceistobeconnectedtothewater
mainsusingnewhosesetsandthatoldhose-sets
shouldnotbereused.
Themaximumnumberofplacesettingstobe
washedis14.
Themaximumpermissibleinletwaterpressureis
1Mpa.
Theminimumpermissibleinletwaterpressureis
0.04Mpa.
shouldbesupervisedtoensurethatthey
donotplaywiththeappliance.
Youngchildren
Thisapplianceisnotintendedforusebypersons
(includingchildrenwithreducedphysical,sensoryor
mentalcapabilities,orlackofexperienceand
knowledge,unlesstheyhavebeengivensupervision
orinstructionconcerninguseoftheappliancebya
personresponsiblefortheirsafety.
)
Thedoorshouldnotbeleftopen,
sincethiscouldincreasetheriskoftripping.
Iftheapplianceisinstalledonacarpetfloor,take
carethatopeningsinitsbasearenotobstructed.
Switch off the appliance
Turn off the water tap,
unload the baskets
Mechanical indicator C.Mechanical indicator C.
Electric indicator on control panel (if provided).
Check the rinse aid level
Compartment A:Compartment A:
For each wash cycle.
Compartment B:B:
For programs with pre-wash only.
(Follow the user instructions)
Fill the detergent dispenser
Warning: wait a few minutes (about 15 minutes) before unloading the dishwasher to avoid scald,as
the dishes and utensils are still hot and more susceptible to break.
They could also dry better.Unload the appliance, starting from the lower basket.
Changing the programme
Add forgotten dishes in the
dishwasher.
Load the baskets Scrape off any large food particles. Soften remnants of burnt food in pans,
then load the baskets. Refer to the dishwasher loading instructions.
When the working cycle is finished, the buzzer of the
dishwasher will sound 8 times, then stop.
Turn off the appliance using the On/Off Button.
If the appiance was under standby mode, it will be power off automaticly after 30 minutes without any operation.
If the appliance is switched
off during a wash cycle.
Open the doorcarefully.
Hot steam mayescape
when the dooris opened!
WARNING!
If the appliance is switched off during a wash cycle, when switched
on again, please re-select the washing cycle and operate the dishwasher
according to the original Power-on state ).
Quick Operation GuideQuick Operation Guide
For detailed operating method read the corresponding content on the instruction manual.
Switch on the appliance Open the door, press the On/Off button to switch on the appliance.
Running the dishwasher T urn on the water tap and press the Start/Pause Button. The machine will start working
after about 10 seconds.
Select a programme Close the door,press the Program Button until the selected program lights up.
( See the section entitled Operation instruction )
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If in this case, the detergent
dispenser must be refilled.
2. Press the Start/Pause button, the machine will be in standby state, press the program
button more than 3 seconds then you can change the program to the desired cycle setting.
3. Press the Start/Pause Button, the dishwasher will run after 10 seconds.
1.Press the Start/Pause Button to stop the washing.
2.Open the door a little.
3.After the spray arms stop working, you can open the door
completely.
4.Add forgotten dishes.
5.Close the door.
6.Press the Start/Pause Button, the dishwasher will run
after 10 seconds.
AB
C
2
2.0peration Insction
A
IMPORTANT
Control Panel
1
\
§Nl
Dishwasher Features
3
2
I
I
D
3 45678
I I
§ 8 •:1\
0 0 0 0 0 0 0 0 0 0 01
-�-
p � ►II
10 12 14
11 13
9
6
4
3.Prior to using for the first time3.Prior to using for the first time
Before using your dishwasher for the first time:
A. Fill the rinse aid dispenser
B. Fill in detergent
A. Rinse Aid DispenserA. Rinse Aid Dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes, which can
leave spots and streaks. It also improves drying by allowing water to roll off the dishes. Your dishwasher is
designed to use liquid rinse aids. The rinse aid dispenser is located inside the door next to the detergent dispenser.
To fill the dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely
black. The volume of the rinse aid container is about 110ml.
Rinse AidDispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
As the rinse aid diminishes, the size of the black dot
on the rinse aid level indicator changes, as illustrated below.
Full
3 / 4 full
1 / 2 full
1 / 4 full - Should refill to eliminate spotting
Empty
If there is no rinse-aid warning light in the control panel, you can judge the amount of rinse-aid by the color of the
optical level
indicator "C" located next tothe cap. When the rinse-aidcontainer is full, the whole indicator will be dark .As the
rinse-aid
diminishes, the size of the dark dot decreases. You should never let the rinse aid get below 1 / 4 full.
When to Refill the Rinse Aid Dispenser
How to fill the Rinse Aid Dispenser
To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
Pour the rinse aid into the dispenser, being careful not to overfill.
Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.
Be careful not to overfill the dispenser, because this could cause over sudsing. Wipe away any spills
with a damp cloth. Don't forget to replace the cap before you close dishwasher door.
Attention!
Clean up any rinse aid spill during filling with an absorbent cloth to avoid excess foaming
during the next wash.
1
2
3
C (Rinse-Aid indicator)C
5
Adjusting Rinse Aid Dispenser
The rinse aid dispenser has six or four settings. Always start with the dispenser
set on "4". If spots and poor drying are a problem, increase the amount of rinse
aid dispensed by removing the dispenser lid and rotating the dial to "5". If the
dishes still are not drying properly or are show spots, adjust the dial to the next
higher lever until your dishes are spot-free. The recommended setting is "4".
(Factory value is "4".)
Increase the dose if there are drops of water or lime spots on the dishes after washing.
Reduce it if there are sticky whitish stains on your dishes or a bluish film on glassware or
knife blades.
Adjust lever
(Rinse)
Adjust lever
(Rinse)
during the next wash. Don't forget to replace the cap before you close dishwasher door.
Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming
NOTE:NOTE:
NOTE:NOTE:
Detergents have chemical ingredients that are necessary to remove dirt, crush dirt and transport it out of the dishwasher.
Most of the commercial quality detergents are suitable for this purpose.
B. DetergentB. Detergent
Detergents
There are 3sorts of detergents
1.With phosphate and with chlorine
2.With phosphate andwithout chlorine
3.Without phosphate and without chlorine
MAXMAX
Based on theirchemical composition, detergents can be splitin two basic types:
The use of normal washing programs incombination with concentrated detergents
reduces pollution and is good for your dishes; these wash programs are specifically matched
to the dirt-dissolving properties ofthe enzymes of the concentrated detergent. For this reason
normal wash programs in which concentrated detergents are used can achieve the same
results that can otherwise onlybe achieved using intensive programs.
Detergent tablets ofdifferent brands dissolve at different speeds. For this reason some
detergent tablets cannotdissolve and develop their full cleaningpower during short
programs. Therefore please use long programs when usingdetergent tablets, to
ensure the completeremoval of detergent residuals.
The dispenser mustbe refilled before the start ofeach wash cycle following the instructions
provided in the wash cycle table . Your dishwasher uses less detergent and rinse aid than
Conventional dishwasher. Generally, only one tablespoon of detergent is needed for
a normal wash load. More heavily soiled items need more detergent. Always add the
detergent just before starting the dishwasher, otherwise it could get damp and will not
dissolve properly.
Concentrated Detergent
Detergent Tablets
Detergent Dispenser
Conventional, alkaline detergentswith caustic components
Low alkaline concentrated detergents with natural enzymes
Normally new pulveriseddetergent is without phosphate. Thus the water softener function of
phosphate is notgiven. If detergents without phosphate areused in the case of hard water
often white spotsappear on dishes and glasses. Inthis case please add more detergent to reach
better results. Detergentswithout chlorine do only bleach alittle. Strong and coloured spots willnot
be removed completely. In this case please choose a programwith a higher temperature.
6
Adding detergent to dispenser
Proper Use of Detergent
Use only detergentspecifically made for the use in dishwashers. Keep yourdetergent fresh and dry.
Don't put powdereddetergent into the dispenser until you're ready to washdishes.
Dishwasher detergent is corrosive!
Take care to keep it out of reach of children.
WARNING!WARNING!
Always add the detergent just before starting each wash cycle.
Only use branded detergent and rinse aid for dishwasher.
If the lid is closed: push the latch to open.
NOTE:NOTE:
Fill the detergentdispenser with detergent.
The marking indicates the dosing levels , as
illustrated on theright:
For main washdetergent.
For pre-wash detergent.
Please observe the manufacturers dosing and storage
Recommendations as stated on the detergent packaging.
Close the lid and press until it locks in place.
If the dishes are heavily soiled, place an additional
detergent dose inthe pre-wash detergent chamber. This detergent willtake effect during the pre-washphase.
A
B
Fill in Detergent
You see information about the amount of detergent for the single programme on page 8.
Please be awarethat soiling levels and water hardness can effect wash results.
Please observe themanufacturer's recommendations onthe detergent packaging.
Push latch to openPush latch to open
AABB
4.Loading the Dishwasher Baskets4.Loading the Dishwasher Baskets
Suitability of use in the dishwasherSuitability of use in the dishwasher
Cutlery with wooden, horn china or
mother-of-pearl handles.
Plastic items thatare not heat resistant.
Older cutlery with glued parts that are not
temperature resistant.
Bonded cutlery itemsor dishes.
Pewter or cooperitems.
Crystal glass.
Steel items subject to rusting.
Wooden platters.
Items made from synthetic fibres.
Some types ofglasses can become
dull after alarge number of washes.
Silver and aluminumparts have a
tendency to discolour during washing.
Glazed patterns may fade if machine
washed frequently.
Not suitable for use Limited suitability
Dishes and items of cutlery must not lie inside one another, or cover each other.
To avoid damage to glasses, they must not be touched.
Load large itemswhich are mostdifficult to clean into the lower basket.
The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffee
and tea cups.
Long bladed knives stored in an upright position are a potential hazard!
Long and/or sharp items of cutlery such as carving knives must be positioned
horizontally in theupper basket.
Please do not overload your dishwasher. This is important for good results and for
reasonable consumption of energy.
Load hollow itemssuch as cups, glasses, pans etc. With the opening facing downwards sothat
water cannot collect in the container or a deep base.
RecommendationRecommendation
Consider buying utensilswhich are identifiedas dishwasher-proof.
Use a mild detergent that is described as 'kind to dishes'. If necessary, seek further
information from thedetergent manufacturers.
For particular items, select a program with as low temperature as possible.
To prevent damage, do not take glass and cutlery out of the dishwasher immediately
after the program has ended.
(For the best performance ofthe dishwasher, follow these loading guidelines.
Features and appearanceof baskets and cutlery baskets mayvary from your model.)
Scrape off any large food particles. Soften remnantsof burnt food in pans.
It is not necessary to rinse the dishes under running water.
Place objects inthe dishwasher in following way:
1.Items such as cups,glasses, pots/pans, etc. are faced downwards.
2.Curved items,or ones with recesses, should be loaded aslant so that water can run off.
3.All utensils are stacked securely and can not tip over.
4.All utensilsare placed in the way that the spray arms can rotate freely duringwashing.
NOTE:NOTE:
Very smallitems should not be washed inthe dishwasher as they could easily fall out ofthe basket.
Attention before or after loading the Dishwasher BasketsAttention before or after loading the Dishwasher Baskets
Toprevent water dripping from the upper basket into the lower basket,we recommend that you
empty the lowerbasket first and then the upper basket.
Removing the DishesRemoving the Dishes
7
8
The upper basketis designed to hold more delicate
and lighter dishware such as glasses, coffee and
tea cups and saucers, as well as plates, small bowls
and shallow pans(as long as they are nottoo dirty).
Position the dishes and cookware so that they will
not get moved by the spray of water.
Loading the Upper BasketLoading the Upper Basket
We suggest that you place large items and the most
difficult to clean items are to be placed into the lower
basket: such as pots, pans, lids, serving dishes and
bowls, as shownin the figure below. It is preferable to
place serving dishesand lids on the side of the racks
in order to avoid blocking the rotation of the top spray
arm.
Loading the Lower BasketLoading the Lower Basket
Pots, serving bowls, etc, must always be placed top down.
Deep pots should be slanted to allow water to flow out.
Please be remindedthat:
The Bottom Basket features folding spikes so that larger ormore pots andpans can be loaded.
The Method Loading Normal DishwareThe Method Loading Normal Dishware
IN
Folding Spikes of Lower Basket
For better stacking of pots and pans,
the spikescan be folded down as
show in the pictureright.
Folding back the cup shelives
For better stacking of pots and pans,
the spikes can be folded down as
show in the picture right.
Cutlery should be placed into the cutlery rack separately
from each other in the appropriate positions, and do
make sure the utensils do not nest together, this may
cause bad performance.
Cutlery BasketCutlery Basket
For a top quality cleaning, place the silverware in
the basket makingsure that:
For a top quality cleaning, place the silverware in
the basket makingsure that:
They do not nest together.They do not nest together.
Silverware is placed with the male face up.Silverware is placed with the male face up.
Long utensils in the middle.Long utensils in the middle.
IN
Normal
9
10
When the workingcycle has finished, the buzzer of the dishwasher willsound for 8 seconds, then stop. Turn off
the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.
Wait for a few minutes before unloading the dishwasher to avoid scald the dishes and utensils
are still hot and more susceptible to breakage. They will also dry better.
Switch Off the Dishwasher
The Led screen is on but the colon icon is not blinking, only in this case the programme has ended.
1.Switch off the dishwasherby pressing theON/OFF button.
2.Turn off the water tap.
Open the door carefully.
Hot dishes are sensitive to knocks. The dishes should be allowed to cool down around 15 minutes
before removing from the appliance.
Open the dishwasher'sdoor, leave it ajar and wait a fewminutes before removingthe dishes. In this way they
will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Empty the lowerbasket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
Change the ProgramChange the Program
Forgot to Add a DishForgot to Add a Dish
If you open the door during a wash cycle , the machine will pause. T
will stop blinking and the buzzer will mooing every minute unless you
close the door. After you close the door, the machine will keep on working after 10 seconds.
he LED display
window
NOTE:NOTE:
At the End of the Wash CycleAt the End of the Wash Cycle
Premise:
A cyclethat is underway can only be modified if ithas only been running for ashort time. Otherwise,the
detergent may have already been released, and the appliance may have already drained the wash water.
In this case, the detergent dispenser must be refilled (see the section entitled " Detergent " ).
Press the Start/Pausebutton, the machinewill be in standby state, press the program buttonmore than
3s then you can change the program to the desired cycle setting (see the section entitled " Starting a wash " )
The LED display shows the state of the dishwasher:
a) The Screen shows H MM and the not blinking------------------Stand by or Being paused
b) The Screen shows H MM and the blinking-----------------------Running
1
2
3
colon icon
colon icon
A forgotten dish can be added any time before the detergent cup opens.
Add forgotten dishes.
Close the door
After the spray arms stop working, you can open the door
completely.
2
3
Open the door a little .
14
5
6
Press the Start/Pause Button to stop the washing.
Press the Start/Pause Button, the dishwasher will run
after 10 seconds.
When you press the Start/Pause button to pause during washing, the LED display window
will stop blinking and the dishwasher will mooing every minute unless you press the
Start/Pause button to start.
NOTE:NOTE:
Wash the arms in soapyand warm water and use a soft brush to
clean the jets. Replace them after rinsing them thoroughly.
NOTE:NOTE:
When following this procedure from step1 to step 3, the filter system will be removed;
when following it from Step 3 to Step 1, the filter system will be installed.
WARNING!WARNING! It is dangerous to open the door when washing, because the hot water may scald you.
The filter preventslarger remnants of food or other objects from gettinginside the pum.
The residues may block the filter, in this case they must be removed.
The filter system consists of a coarse filter, a flat (Main filter)
and a microfilter(Fine filter).
Food and soil particles trapped in this filter are pulverized by a
special jet on the lower spray arm and washed down to drain.
Larger items, suchas pieces ofbones or glass,that could block
the drain aretrapped in the coarse filter. To remove theitems
caught by thisfilter, gentlysqueeze the tapon the top of this
filter and liftit out.
This filter holds soil and food residues in the sump area and
prevents it from being redeposit on the dishes during wash cycle.
Main filter 1
Coarse filter 2
Fine filter 3
2
3
1
Filter assembly
The filter efficiently removes food particles from the wash water, allowing it to be recycledduring the cycle.
For best performanceand results, the filter must be cleaned regularly. For thisreason, it is a good idea to
remove the largerfood particles trapped in the filter after each washcycle by rinsing the semicircular filter and
cup under runningwater. To remove the filterdevice, pull the cup handle inthe upward direction.
WARNING!WARNING!
The dishwasher must never be used without the filters.
Improper replacement of the filter may reduce the performance level of the appliance
and damage dishes and utensils.
nn
nn
Step 1 Turn the filter in anti-clockwise direction.
Step 2 Lift the filterassy up.
6.Maintenance and Cleaning6.Maintenance and Cleaning
Filtering SystemFiltering System
NOTE:NOTE:
When following this procedure from step1 to step 2, the filter system will be removed;
when following it from Step 2 to Step 1, the filter system will be installed.
11
1
2
OpenOpen
The control panel can be cleaned by using a lightly dampened cloth.
After cleaning, make sure to dry it thoroughly.
For the exterior, usea good appliancepolish wax.
Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.
Protect AgainstFreezing
1.Cut off the electrical power to the dishwasher.
2.Turn off the water supply and disconnect the water inlet pipe from the water valve.
3.Drain thewater from the inlet pipeand water valve. (Use a pan to gather the water)
4.Reconnect the water inlet pipe to the water valve.
5.Remove thefilter at the bottom of the tub and usea sponge tosoak up water in the sump.
please take frostprotection measures on the dishwasher in winter. Every time after washing cycles,
please operate as follows
Caring for the DishwasherCaring for the Dishwasher
Cleaning the Filter
Cleaning The Door
Toclean the coarse filter and the fine filter,use a cleaning brush. Reassemble the filter parts as shown inthe figures
on the lastpage and reinsert the entire assembly in the dishwasher, positioning it in its seat and pressing downwards.
When cleaning the filters, don't knock on them. Otherwise, the filters could be
contorted and the performance of the dishwasher could be decreased.
WARNING!WARNING!
To clean the edge around the door, you should use only a soft warm, damp cloth.
To avoid penetration of water into the door lock and electrical components, do not
use a spray cleaner of any kind.
WARNING!WARNING!
Never use a spray cleaner to clean the door panel as it may damage the door lock
and electrical components.
Abrasive agents or some paper towels should not be used because of the risk of
scratching or leaving spots on the stainless steel surface.
nn
nn
Cleaning the Spray Arms
NOTE:NOTE:
If your dishwasher cannot work because of the ice,
please contact professional service persons.
It is necessaryto clean the spray arms regularly for hard
water chemicals willclog the spray arm jets and bearings.
- Inspect the filters for blocking after every time the dishwasher has beenused.
- By unscrewing the coarsefilter, youcan remove the filter system. Remove any food remnantsand
clean the filters under running water.
Notes:
The entire filter assembly should be cleaned once a week.
NOTE:NOTE:
To remove the lower spray arm, pull out the spray arm upward.
Toremove the upper spray arm, hold the nut,rotate the arm
clockwise to removeit.
Wash the arms in soapyand warm waterand use a soft brush to
clean the jets. Replace them after rinsing them thoroughly.
12
OpenOpen
It is recommend that you run a wash cycle withthe
dishwasher empty andthen remove the plug from the
socket, turn off the water supply andleave the door of
the appliance slightlyopen. This will help the door
seals to last longer andprevent odours from forming
within the appliance.
If the appliance must be moved, try to keep it in the
vertical position. If absolutely necessary, it can be
positioned on its back.
One of thefactors that cause odours to form in the
dishwasher is foodthat remains trapped in the seals.
Periodic cleaning witha damp sponge will prevent this
from occurring.
Electrical Requirements
Ensure the voltage and frequency of the power being corresponds to
those on the rating plate. Only insert the plug into an electrical socket which is earthed
properly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug , replace the socket, rather than using a adaptors or the like as
they could cause overheating and burns.
Electrical Connection
Insure proper ground
exists before use
GROUNDING INSTRUCTIONS
7.Installation instruction7.Installation instruction
Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power supply.
Use the required fuse 10 amp, time delay fuse or circuit breaker recommended and provide separate circuit serving
only this appliance.
Position the appliancein the desired location. The back should restagainst the wallbehind it, and the sides,
along the adjacentcabinets or walls. The dishwasher is equipped with water supply and drain hoses that can
be positioned eitherto the right or the left sides to facilitate proper installation.
Levelling the Appliance
Once the appliance is positioned for levelling, the height of the dishwasher
may be altered via adjustment of the screwing level of the feet.
Positioning the AppliancePositioning the Appliance
About Power ConnectionAbout Power Connection
WARNING!WARNING!
For personal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
DO NOT CUT OR REMOVE THE EARTHING CONNECTION FROM THE POWER CORD
UNDER ANY CIRCUMSTANCES.
nn
nn
Before cleaning orperforming maintenance, always
remove the plugfrom the socket.
To clean the exterior and rubber parts of the dishwasher,
do not use solvents or abrasive cleaning products.
Only use a cloth with warm soapy water.
Toremove spots or stains from the surface of the
interior, use a cloth dampened with water an a little
vinegar, or a cleaning product made specifically for
dishwashers.
Remove the Plug
No Solvents or Abrasive Cleaning
Moving the Appliance
Seals
How to Keep Your Dishwasher in Shape
After every wash,turn off the water supplyto the
appliance and leave the door slightly open so that
moisture and odours are not trapped inside.
After Every Wash When not in Use for a LongTime
This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of
electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a
cord having an equipment-earthing conductor and an earthing plug. The plug must be plugged into an
appropriate outlet that is installed and earthed in accordance with all local standards and requirements.
nn
13
14
for personal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE
FROM THE POWER CORD.
EARTHING
CONNECTION
nn
nn
WARNING!WARNING!
Improper connection of the equipment earthing conductor can result in the risk of an
electric shock.
Check with a qualified electrician or service representative if you are in doubt whether the
appliance is properly earthed.
Do not modify the plug provided with the appliance. If the plug does not fit properly to the
outlet, please have a qualified electrician to install a proper outlet.
nn
nn
nn
Cold Water Connection
Connect the coldwater supply hose to a threaded 3/4(inch) connector andmake sure
that it isfastened tightly in place.
If the waterpipes are new or have not been used foran extended period of time, let the
water run tomake sure that the water is clear. This precaution is needed to avoid the
risk of thewater inlet to be blocked and damage the appliance.
Please close the hydrant after using.
WARNING!WARNING!
Water ConnectionWater Connection
Drain hose Connection
Insert the drainhose into a drain pipe with a minimum diameter of 40mm, or let it runinto the sink, making sure to
avoid bending orcrimping it. The top ofthe hose must be less than 1000mm.
MAX 1000mm
A
Counter
Front
Drain pipe
NOTE
The top of the hose
must be less than
1000mm.
40mm
B
PLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, BPLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, B
15
The following things should be checked before starting the dishwasher.
Start of DishwasherStart of Dishwasher
The content of this manual is very helpful to the users.
After installation, please make sure to keep this manual.
Attention:Attention:
1The dishwasher is level and fixed properly.
2The inlet valve is open.
3There is a leakage at the connections of the conducts.
4The wires are tightly connected.
5The power is switched on.
6The inlet and drain hoses are knotted.
7All packing and print materials should be taken out of the dishwasher.
Extension Hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longerthan 4 metres,otherwise the cleaning effect of the dishwasher couldbe reduced.
Water Outlet
Connect the waterdrain hose. The drain hosemust be correctly fitted to avoid water leaks.
Ensure that the water drain hose is not kinked or squashed.
If the sinkis more than 1000mm higher than the floor,the excess water in hoses cannot be drained directly
into the sink. It will be necessary to drain excess water from hoses into a bowl or suitable
container that isheld outside and lower than the sink.
How to Drain Excess Water From Hoses
Syphon Connection
The waste connectionmust be at a height less than 1000 mm(maximum) from the bottom of the dish.
The water drain hose should be fixed .
16
8.Troubleshooting Tips8.Troubleshooting Tips
Problem Possible Causes What To Do
Fuse blown, or the
circuit breaker acted
Replace fuse or reset circuit breaker. Remove any other
appliances sharing the same circuit with the dishwasher
Suds in the tub
Spilled rinse-aid Always wipe up rinse-aid spills immediately.
Review the charts on the following pages may save you from calling for service.
White film on
inside surface
There are rust
stains on cutlery
Knocking noise
in the wash cabinet
Rattling noise
in the wash cabinet
Knocking noise
in the water pipes
Hard water minerals
The affected items are
not corrosion resistant.
A spray arm is
knocking against
an item in a basket
Items of crockery
are loose in the
wash cabinet
This may be caused
by on-site installation
or the cross-section of
the piping.
To clean the interior, use a damp sponge with
dishwasher detergent and wear rubber gloves.
Never use any other cleaner than dishwasher
detergent for the risk of foaming or suds.
Interrupt the program, and rearrange the items
which are obstructing the spray arm.
Interrupt the program,
and rearrange the items of crockery.
This has no influence on the dishwasher function.
if in doubt, contact a suitably qualified plumber.
Stained tub interior
Detergent with
colourant was used
Make sure that the detergent is the one without
colourant.
Improper detergent
Dishwasher doesn't
start
Make sure the dishwasher is turned on and the door is
closed securely.
Check that the water supply is connected properly and
the water is turned on.
Make sure to close the door properly and latch it.
Make sure the power cord is properly plugged into the
wall socket.
Power supply is not
turned on
Error code:E1;
Water pressure is low
Door of dishwasher
not properly closed.
water not pumped
from dishwasher
Kink in drain hose
Filter clogged
Kitchen sink clogged
Check drain hose.
Check coarse the filter
(see section titled " Cleaning The Filter ")
Check the kitchen sink to make sure it is draining well.
If the problem is the kitchen sink not draining ,you may
need a plumber rather than a serviceman for dishwashers.
Before Calling for ServiceBefore Calling for Service
Technical
problems
General
problems
Noise
Use only the special dishwasher detergent to avoid suds.
If this occurred, open the dishwasher and let suds evaporate.
Add 1 gallon of cold water to the tub. Close and latch the
dishwasher, then select any cycle. Dishwasher will drain
out the water at the first step. Open the door after draining
is stop and check if the suds is disappeared.
Repeat if necessary.
The items should be corrosion resistant.
Error CodesError Codes
17
Problem Possible Causes What To Do
The dishes were not
loaded correctly.
See notes in " Loading the Dishwasher Baskets ".
The dishes
are not clean
Cloudiness
on glassware
Black or gray
marks on dishes
Detergent left in
dispenser cups
The dishes
are not drying
Select a more intensive programme.
See" Wash Cycle Table ".
Use more detergent, or change your detergent.
Rearrange the items so that the sprayer can rotate freely.
Clean and/or fit the filter combination correctly.
Clean the spray arm jets. See "Cleaning the Spray
Arms".
Use less detergent if you have soft water and select
a shortest cycle to wash the glassware and to get
them clean.
Use a mild abrasive cleaner to eliminate those marks.
Re-loading the dishes properly.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Begin unloading the dishwasher only once the
dishes are barely warm by touching. Empty the low
basket first. This prevents water form dropping off
dishes in the upper basket.
In short program the rinse temperature is lower.
This also lowers cleaning performance. Choose
a program with a long high rinse temperature.
Water drainage is more difficult with these items.
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
The program was
not powerful enough.
Not enough detergent
was dispensed.
Items are blocking
the path of spray arms.
The filter combination
is not clean or
is not correctly fitted.
This may cause
the spray arm jets
get blocked.
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes block
detergent cup opens.
Improper loading
Too little rinse-aid
Dishes are removed
too soon
Wrong program
has been selected
Use of cutlery with
a low-quality coating
Unsatis
-factory
washing
result
Unsatis
-factory
drying
result
Overflow.
When some malfunctions occur, the appliance will display error codes to warn you:
Codes Meanings Possible Causes
Longer inlet time.
Faucet is not opened, or water intake is
restricted,or water pressure is too low.
Some element of dishwasher leaks.
E4
E1
WARNING!WARNING!
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak,
the water should be removed before restarting the dishwasher.
nn
nn
E8
Open circuit or break of distributary valve.
Failure of orientation of distributary valve.
Not reaching required temperature
Malfunction of heating element.
E3
Height : 845mm
Width : 598m m
Depth : 605mm(with the door closed)
Water pressure: 0.04-1.0MPa
Power supply: see rating label
Capacity: 14 place settings
Technical Information
598
WARNING!
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leaks,
the water should be removed before restarting the dishwasher.
845
1175
605(with the door closed)
18
This manual suits for next models
2
Table of contents
Other Everdure Dishwasher manuals
