EverFocus LCD Monitor User manual

Please read this manual carefully for proper usage before installation and use.It is recommended to keep this manual properly for future check.
LCD MONITOR

TABLE OF CONTENTS
Important Safety Instructions………………………………………………………………………………1
Product Introduction……………………………………………………………………………………………3
General information………………………………………………………………………………………………3
Features……………………………………………………………………………………………………………3
Listing………………………………………………………………………………………………………………6
& Connection……………………………………………………………………………………7
Panel Control Keys……………………………………………………………………………………………7
Remote Control…………………………………………………………………………………………………8
Basic Operation Instruction…………………………………………………………………………………10
Power On/Off……………………………………………………………………………………………………10
Signal Source Selection…………………………………………………………………………………………10
Menu Operation Instruction ……………………………………………………………………………………10
PICTURE…………………………………………………………………………………………………………11
SOUND …………………………………………………………………………………………………………12
OSD………………………………………………………………………………………………………………13
Simple Troubleshooting ……………………………………………………………………………………14
Installation

Thank you to choose the monitor made by our company, a valuable product with excellent quality and multiple functions.
This machine will bring you more audiovisual enjoyment. Its design can insure user's safety. All machine are strictly tested
before leaving factory. But incorrect use can lead to electric shock or fire. In order to insure safety and extend its life,
please read below regulations carefully before using it and comply with the following safety instructions.
1)Read the manual and marking label before using the machine, and keep the user manual for later use.
2)There is high voltage inside the machine, follow all the warnings and instructions strictly on the manual.
3)Don't use the attachments which are not recommended by the machine manufacturer as they may cause hazards.
4)The power cord must be placed correctly so as to avoid be trample or crush.
5)Please do not make the power socket overloaded or the power cord extended. Otherwise it will cause fire or electrical
shock.
6)If you are going to pull out the power cord from this product, please dry your hands, pull the cord by grasping the plug.
Never pull the cord itself.
7)If you will not use the machine for a long time, please pull out the power cord. Do not keep the sleeping mode for too
long time.
8)Please put this machine in the place of well ventilation instead of extremely hot, cool or moist, and direct sunshine.
9)The slots on the case is designed to release heat so as to assure that all inside components will not reach an extra
high temperature and can work normally for a long time. Please do not cover the holes while place it. Don't place the
machine near or over heat source or place in built-in installation.
10)The power cord must be taken off before you clean the machine. Don't use the liquid cleanser or aerosol cleanser. It
is recommended to use a wet soft cloth to clean the machine. Don't use the alcohol, impregnant or ammoniac liquid
to wipe the screen.
11)Please don't place it on an unstable position so as to avoid falling off.
12)Don't place the monitor near water source, like a bathtub, pool, washing machine, or moist cellar and similar
environment.
13)The LCD panel is fragile and expensive. The surface of the panel is easy to be scratched. Please don't use the hard
1
Important Safety Instructions

14)There is high voltage inside the machine but no parts which can be repaired by users themselves. In order to assure
the people's safety, please don't open the case to repair it by yourself. If it is needed to repair, please contact
qualified engineer to repair.
15)All cables can be connected or pull out only after power supply is turned off.
16)During a thunder rain weather, do not touch the power cord.
17)When the following troubles occur, please pull out the plug and call the professional engineers to repair.
A. The cable or plug is damaged.
B. The product was fallen down or the case is damaged.
C. Obvious abnormal situation occurs. In spite of correct operation according to the user manual but it still can't work
normally.
D. Some abnormal substances or liquid fall into it.
E. Unusual sound or smell sends out.
18)When the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
19) The machine should not suffer from waterdrop or watersplash, do not place the vessel with water (or other liquids) on
it, for like this it is possibly to cause fire or electric shock.
20) The attaching plug should be inserted into the power point completely, otherwise it may cause spark to bring fire.
21) Please do not put candle, ash-tray, incense, inflammables or explosive nearby this machine.
22) Please do not stretch into any sharp object, metal or liquid, or touch the signal attachment or the inner of radiation
hole, in order to avoid short circuit and product damage, or possibly causing electric shock. Especially pay attention
when there are children on the spot.
23) Please don't use the machine immediately when moving the machine from low temperature place to high temperature
one, or install and use at the place of facing air conditioning, otherwise it may cause the condensation in the machine,
to cause fault.
24) Must be careful when moving this machine, avoiding being struck, especially pay attention to protect the screen part.
In addition, if using handcart, must note the injury as the product is overturned from the handcart because of hard
braking, overexerting and uneven ground.
thing to knock, press, score the panel. Otherwise it will be harmful for the panel. The exchange cost is very high.
2

General information
● Having many ideal connectors. The product can be used as a computer monitor with VGA or HDMI connectors.
● Much faster response time will completely eliminate shadow of picture. seeing film and playing game may
be more fluent.
● Enough colours.
● Wider viewing angle, higher brightness, higher contrast, lower consumption.
● Intelligent image mode and sound mode can offer you intelligent audiovisual effect.
● Built-in the latest digital comb filter, which makes image more clear. The internal 3D De-Interlace technique
can totally eliminate the screen dithering caused by interlace signals.
● Own perfect timing functions, you can set time to turn off. It will be turned off in state of no signals, too.
● Auto-setup function help you set the image to best performance in several seconds in PC mode.
● Auto color balance adjustment technology takes your machine to the best color setting for all different kinds
of display adapters in PC mode.
● Automatic denoise technique can greatly eliminate background noise caused by menu interference and the
noise caused by weak signals so as to make the picture on the screen clear.
Features
● interface specification:
VGA
HDMI
Interface Specification
DB-15, 75Ω 0.5~0.7Vp-p H/V:TTL Level (Support mode refer to VGA Input Mode )
Video signal: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: LPCM
48KHz, 44.1KHz, 32KHz, 24Bit, 20Bit, 16Bit
3
Product Introduction

Video/BNC Input
Audio Input
Earphone
75Ω 1Vp-p
75Ω Imbalance
16~300Ω 100mW+100mW
● The Technical Specifications for Final Product
Panel size
Max. Resolution
Best resolution
Pixel pitch
Active area
Color
Power adapter
Unpacking Dimension(L×W×H)
Packing Dimension(L×W×H)
Net weight
Gross weight
21.5"
1680×1050
1680×1050@60Hz
0.011102 in×0.011102 in
18.652 in×11.657 in
100-240V 50/60Hz
20.866×2.736×12.677 in
23.819×5.512×16.260 in
13.228 lbs
14.55 lbs
16.7M
19"
1280×1024
1280×1024@60Hz
0.011575 in×0.011575 in
14.816 in×11.852 in
100V-240VAC 50/60Hz
16.929×2.5×13.976 in
19.488×5.236×16.929 in
12.125 lbs
14.33 lbs
16.7M
23"
1920×1080
1920×1080@60Hz
100-240V 50/60Hz
× × in
25.787×4.528×in
14.33 lbs
16.535 lbs
0.010453 in×
20.069 in×11.289 in
0.010453 in
22.244 1.811 13.386
17.244
16.7M
VGA input mode●
VGA
SVGA
XGA
WXGA
720×400
640×480
800×600
1024×768
1280×1024
19"
1
2
3
4
5
S/N Mode Resolution Available Input Signal
VGA
VGA
VGA
VGA
VGA
70
60
60
60
60
Refresh(Hz)
Note: Recommended mode: @60Hz1280×1024
4

S/N Mode Resolution Available Input SignalRefresh(Hz)
1
2
3
4
5
6
7
8
9
10
VGA
SVGA
XGA
SXGA
WXGA
WUXGA
720×400
640×480
800×600
1024×768
1280×720
1280×960
1280×1024
1360×768
1600×900
1920×1080
70
60
60
60
60
60
60
60
60
60
VGA
VGA
VGA
VGA
VGA
VGA
VGA
VGA
VGA
VGA
Note: Recommended mode: @60Hz1920×1080
5
23"
S/N Mode Resolution Available Input SignalRefresh(Hz)
1
2
3
4
5
6
7
8
9
10
VGA
SVGA
XGA
SXGA
WXGA
WSXGA
720×400
640×480
800×600
1024×768
1280×720
1280×960
1280×1024
1360×768
1600×900
1680×1050
70
60
60
60
60
60
60
60
60
60
VGA
VGA
VGA
VGA
VGA
VGA
VGA
VGA
VGA
VGA
Note: Recommended mode: 1680×1050@60Hz
21.5 "

●
●
Operating Environment:
Temperature: 41°F~104°F Humidity: 10%~85% Atmosphere Pressure: 25.395in~30.711in
Storage Environment:
Temperature: -4°F~131°F Humidity: 5%~95% Atmosphere Pressure: 25.395in~30.711in
Please make sure that all of the following items are complete:
● Monitor (Include base)
● User manual
● Power cord
If any of above listed items is missing, please contact your dealer or our service department.
Listing
6

Power Connection
nsert the power plug into the socket of the electrical source (
Notes:
1. When connecting the power cord, be sure to turn off the
machine and other equipment's power.
2. If a long time at leisure, please disconnect it from power
supply.
3.
IAC 100V-240V, 50/60Hz).
This monitor must be connected to a three pin socket outlet for safety.
7
Power Cord
3
4
5
6
SOURCE
MENU
Installation & Connection
Panel Control Keys

8
1. SOURCE: Press this key to enter the menu of signal source and choose signal source.
2. / : Press these two keys to select the items which you want to adjust under OSD operation.
3. MENU: Press this key to enter main menu.
4. :
▲ ▼
Turns on/off the monitor.
Note: There are some apparent differences between modes, please according to practicality.
PLAY
PAUSE
STOP ROTATE
PREV. NEXT REV. F WD.
INFO 16:9
COLOR
P N
AUDIO
Power
Numerical key
Smart sou nd
Volume
Time
Zoom
Source
Menu
Cursor Ke y
OK
Smart ima ge
Mute
Invalid
Invalid
Key
POWER
MUTE
Numerical key
F1
SMART S
SMART P
Cursor key
VOL+/VOL-
MENU
SOURCE
Time ( )
16:9
OK
Function
Turn on or standby
Eliminate sound
Number input button
Freeze picture
Intelligent sound mode selection
Intelligent image mode selection
Up or Down cursor button: function select;
Left or right cursor button: analog add or reduce
Sound volume add or reduce button
Press this button to display menu
Press this button to display signal source selection menu
Timer setting button, press this key can set time of turning down
Switch aspect ratio
Confirm operation
Remote Control

Remote control battery installation method:
Take off the cover of battery box, fix two AAA batteries with 1.5 volt, and conform with the polarity of remote control
battery box.
Note: Appearance of the remote control may be different from this picture, please according to practicality.
Precautions for use of remote control:
1. When using remote control you should point it to the remote-control inductive window. The goods between remote
control and inductive window may hinder normal operation.
2. Do not cause the remote control to receive fierce vibration. In addition, do not set or place the remote control under
direct sunlight, for the thermal energy will cause the distortion of remote control.
3. When remote-control inductive window of main machine is under direct sunlight or intense illumination, the remote
control may malfunction, by now, please change the angle of illumination or this machine, or approach the inductive
window to operate the remote control.
4. When the battery voltage is insufficiency it influences the remote control distance, you should replace with new battery;
when not to use the remote control for long or the battery is exhausted, please take out the battery, in order to avoid
bringing the battery leakage to corrode the remote control and thus cause it out of commission.
5. Do not use different batteries. The mix use of new and old batteries is not allowed, you should use battery pair.
6. Do not throw battery into fire, charge or disassembly, especially do not charge, assemble and disassemble, heat or
burn to the used battery. Please observe the related environmental protection stipulation on wasted battery.
9

Power On/Off
Press " " key to turn on/off the monitor.
Signal Source Selection
Press ''SOURCE'' key, menu of signal source will be displayed on the screen. Then press ''▲ ▼" key /
to choose the signal source such as BNC, AV, PC, HDMI. Press ''MENU'' key and the monitor will
switch the current signal source to the signal source you choose.
Menu Operation Instruction
Press ''MENU'' key, the monitor will display the main menu.
1. Press "t/u" key to select the adjustment sort menu, which includes 3
sorts: PICTURE, SOUND, OSD.
2. Press to enter the adjustment sort menu. ''▼" key
3. Press / to select what is needed to adjust in sort menu. ''▲ ▼" key
4. Press "t/u" key to adjust the value or setting.
5. Press ''MENU'' key to exit the main menu when the monitor displays the
Main Menu; Press ''MENU'' key to return to previous menu when the
monitor displays the submenu; Press ''SOURCE'' key to display the signal.
6. During the operation, the selections which can not be adjusted at current mode will be hidden automatically and the
color of the selections will be changed into gray.
7. Menu Operation Instruction in this manual is explained according to BNC mode. The operations in other modes are
similar to the one in BNC mode. Users can take it as reference.
Input Source
BNC
AV
PC
HDMI
Adjust Select Menu:Exit
Full
Standard
48
48
50
55
50
Picture Mode
Contrast
Brightness
Saturation
Sharpness
Aspect Ratio
Color Temp.
Noise Reduction
Hue
Soft
Off
10
Basic Operation Instruction

11
PICTURE
''▲ ▼"
"t/u"
★Special Attention
The value adjusted by user, such as Contrast, Brightness, Saturation, Hue,
and Sharpness will be saved automatically by the machine as personal
mode.
★Remote Control Shortcut Keys
SMART P: Press SMART P key on the remote control. You can switch the
function among the "Standard", "Soft", "User," "Bright" four modes .
16:9: Press 16:9 key on the remote control, you can switch the mode
among the "Full, "4:3", "Subtitle", "Film","Overscan","Underscan"six modes.
<Notice:"overscan","underscan"can be adjusted under AV,BNC,S-Video signal source>
Select to enter the PICTURE submenu. Press / key to choose
what you need. Press key to adjust analog value or state (see below
table).
Adjust Select Menu:Exit
Full
Standard
48
48
50
55
50
Picture Mode
Contrast
Brightness
Saturation
Sharpness
Aspect Ratio
Color Temp.
Noise Reduction
Hue
Soft
Off
Picture Mode
Contrast
Brightness
Saturation
Hue
Select picture mode
Adjust the contrast of whole picture
Adjust brightness and blackness of
whole picture
Adjust the saturation of whole picture
Adjust the hue of whole picture
"Standard", "Soft", "User," "Bright" four modes.
Increasing analog value increases Contrast;
Decreasing analog value decreases Contrast(0-100).
Increasing analog value increases brightness;
Decreasing analog value decreases brightness(0-100).
Increasing analog value increases color;
Decreasing analog value decreases color (0-100).
Increasing analog value increases green;
Decreasing analog value increases purple(0-100).
Option Function Description
Sharpness
Aspect Ratio
Adjust the sharpness of whole picture
Select picture scale
Increasing analog value increases definition;
Decreasing analog value decreases definition (0-100).
“Full", "4:3", "Subtitle","Film”,"overscan","underscan"six modes

12
SOUND
''▲ ▼" key
"t/u"
★Special Attention
1. Normally, 50 value of adjustment is recommended;
2. The treble or bass analog value which is adjusted by the users will be
saved as the personal mode by the machine
, "Standard", "Music", "Movie", "User" four modes.
Select to enter the SOUND submenu. Press /to choose what
you need. Press key to adjust analog value or state (see below table).
★Remote Control Shortcut Keys
SMART S: Press SMART S key on the remote control. You can switch the
function among the
MUTE: Open or close sound.
VOL+/VOL-: Add or reduce volume.
Adjust Select Menu:Exit
50
50
0
Standard
Sound Mode
Treble
Bass
Balance
Auto Volume Off
Sound Mode
Treble
Bass
Adjust audio effect mode
Adjust treble value
Adjust bass value
"Standard", "Music", Movie", "User" four modes.
Increasing analog value increases treble;
Decreasing analog value decreases treble (0-100).
Increasing analog value increases bass;
Decreasing analog value decreases bass (0-100).
Option Function Description
Color Temp
Noise Reduction
Select color temperature mode of the
picture
Select model of 3D NR
There are three Color Temperature modes: "Standard",
"Warm", "Cool ".
“Medium", "High", "Off", "Low".
Balance Adjust balance of left or right sound Increasing analog value decreasing left volume;
Decreasing analog value decreases right volume(L50-R50).

OSD
''▲ ▼" key
"t/u"
Select to enter the OSD submenu. Press /to choose what you
need. Press key to adjust analog value or state (see below table).
13
Adjust Select Menu:Exit
English
60 Second
0
On
OSD Language
OSD Duration
OSD Transparency
Blue Screen
Factory Defaults
OSD Language
OSD Duration
OSD Transparency
Blue Screen
Factory Defaults
Select language for OSD display
Adjust duration of OSD menu
Adjust halftone of OSD menu
Open or close blue screen
Resume to setting of factory
English, Portuguese, Spanish, Italian, French, German,
Russian for option.
Increasing analog value, extend duration time of OSD menu;
(15, 30, 45, 60). Unit: second.
Increasing analog value increases halftone;
Decreasing analog value decreases halftone(0-100).
"On/Off", two states.
Reset all values to setting of factory.
Option Function Description
Note: With the mode of AV, PC, HDMI, all functions and adjustments are similar with BNC. User can check it at
convenience.
Auto Volume Select Auto Volume "On/Off", two states.

CAUTION: Don't let your machine display the same picture for a long time, please set up a screen protection
procedure. If a high contrast picture remains for along time, this picture will bring a 'leave shadow' in screen.
Usually the 'leave shadow' will disappear gradually when you turn off the machine power. However, this trouble
can't be repaired , Which isn't in range of warranty.
Electrical release at turning off. It is normal.
Noise Signals at turning off.
Computer display image
excursion, not full screen,
over screen.
1.Adjustment is incorrect.
2.Display mode is incorrect.
1.Use auto-adjustment function.
2.Enter to adjust horizontal or
vertical position.
3.Use recommended mode.
"GEOMETRIC"
Exterior influence, for example
lightning, static electricity and so
on, which are possibly to disturb
the normal operation of this
machine
Can not operate this
machine .
Press " " button to turn off electrical source, then
press " " button to turn on the monitor again after
1-2 minutes.
Computer display faintly.
1.Adjustment is incorrect.
2.Display mode is incorrect.
1.Use auto-adjustment function.
2.Use commend mode
Symptom Factor Solution
No image. No sound.
Power plug is loose, power
cord don't connect well.
1.Check power cord whether or not connect well.
2.Check if the button is on. " "
Computer no display, and
prompt no signal input, red
indicator LED twinkling.
Signal cable is loose or fall off. Check signal cable whether or not loose, fall off,
reconnect well again.
No color.
Color saturation is too low.
Enter to add up color saturation."PICTURE"
14
Simple Troubleshooting
Other manuals for LCD Monitor
1
Table of contents
Other EverFocus Monitor manuals

EverFocus
EverFocus EX784B User manual

EverFocus
EverFocus EN-7519C User manual

EverFocus
EverFocus EN-7517E User manual

EverFocus
EverFocus EN-7515C User manual

EverFocus
EverFocus EN-7522C User manual

EverFocus
EverFocus EN-1080P22 User manual

EverFocus
EverFocus EN 200 User manual

EverFocus
EverFocus LCD Monitor User manual

EverFocus
EverFocus EN-1080P24 User manual

EverFocus
EverFocus EN-75080C User manual