evertz 3405FR Series User manual

3405FR Series
Fiber Optic SFP Frame
Installation and Operating
Manual
© Copyright 2010 - 2011
EVERTZ MICROSYSTEMS LTD.
5288 John Lucas Drive,
Burlington, Ontario, Canada
L7L 5Z9
Phone: [phone]
Sales Fax: [phone]
Tech Support Phone: [phone]
Tech Support Fax: [phone]
Sales: [email protected]
Tech Support: [email protected]
Web Page: http://www.evertz.com
Version 2.3, May 2013
The material contained in this manual consists of information that is the property of Evertz Microsystems and is
intended solely for the use of purchasers of the 3405FR Series. Evertz Microsystems expressly prohibits the use of
this manual for any purpose other than the operation of the device.
All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz
Microsystems Ltd. Copies of this guide can be ordered from your Evertz products dealer or from Evertz
Microsystems.

IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with
arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “Dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (Servicing) instructions
in the literature accompanying the product.
•Read these instructions
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
•Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC –
SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE
WARNING
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING A
ND ENSURE THAT NO
OBJECTS FILLED WITH LIQUIDS ARE PLACED ON THE EQUIPMENT
WARNING
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT
THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE
WARNING
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE

FIBER OPTIC DEVICES
Some modules in this product may have fiber optic outputs. The following safety information applies to
the optical outputs of these modules. Consult individual chapters for specific safety information for
handling fiber optics.
WARNING
CAUTION –
CLASS 1 VISIBLE & INVISIBLE LASER RADIATION WHEN OPEN
DO NOT VIEW DIRECTLY OR WITH OPTICAL INSTRUMENTS.
ELECTROSTATIC SENSITIVE DEVICES
The hand symbol within an equilateral triangle is intended to alert the user
to instructions related to precautions for handling electrostatic-sensitive
devices. See “Electro Static Discharge (ESD) Precautions” section for
further details.

INFORMATION FOR NEBS COMPLIANT VERSIONS
The intra-building port(s) of this equipment is suitable for connection to
intra-building or unexposed wiring or cabling only. The intra-building
port(s) of the equipment MUST NOT be metallically connected to interfaces
that connect to the OSP or its wiring. These interfaces are designed for use
as intra-building interfaces only (Type 2 or Type 4 ports as described in GR-
1089-CORE, Issue 4) and require isolation from the exposed OSP cabling.
The addition of Primary Protectors is not sufficient protection in order to
connect these interfaces metallically to OSP wiring.
The intra-building port(s) of the equipment or subassembly must use
shielded intra-building cabling/wiring that is grounded at both ends.
This equipment is to be connected to a Common Bonding Network. See
Installation section for further information.

This equipment is to be installed in the network telecommunication
facilities.

To ensure that radiated emissions do not exceed NEBS requirements, all
Ethernet (Cat-5 or better) connections must use shielded cable.
The use of unshielded Ethernet cable may cause excessive electromagnetic
radiation in excess of NEBS specifications.

INFORMATION TO USERS IN EUROPE
NOTE
This equipment with the CE marking complies with both the EMC Directive (2004/108/EC) and the Low Voltage
Directive (2006/95/EC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European standards:
•EN60950 Product Safety
•EN55103-1 Electromagnetic Interference Class A (Emission)
•EN55103-2 Electromagnetic Susceptibility (Immunity)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to the
European Union EMC directive. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
INFORMATION TO USERS IN THE U.S.A.
NOTE
FCC CLASS A DIGITAL DEVICE OR PERIPHERAL
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
WARNING
Changes or modifications not expressly approved by Evertz Microsystems Ltd. could void the user’s authority to
operate the equipment. Use of unshielded plugs or cables may cause radiation interference. Properly shielded
interface cables with the shield connect
EN60950
Safety
EN504192 2005
Waste electrical products should not
be disposed of with household
waste. Contact your Local Authority
for recycling advice
EN55103-1: 1996
Emission
EN55103-2: 1996
Immunity
Evertz Microsystems Ltd This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
This device may cause harmful interference, and this device must
accept any interference received, including interference that may
cause undesired operation.
Tested to comply
with FCC
Standards
For Commercial Use

3405 Frame Manual
3405FR-BNC Fiber Optic SFP Frame
Revision 2.3
REVISION HISTORY
REVISION DESCRIPTION DATE
1.0 First Release Mar 2009
1.1 Added Status LED and VistaLINK Monitoring description Mar 2009
1.2 Added power supply cabling information Jun 2009
1.3 Added SFP variants and VLPRO screenshots & parameter chart Nov 2009
1.4 Removed Status LED note in section 6.2.1 Dec 2009
1.5 Revised front and rear panel screens and added Ethernet configuration Apr 2010
1.6 Added information regarding the 3405FAN-Q module Jun 2010
1.7 Revised serial port command and VistaLINK parameters Sept 2010
1.8 Added 3405 Series CWDM Passive Optical Modules section Oct 2010
2.0 3405 Series Manual – merged all 3405FR frame information Nov 2010
2.1 Added 48V versions, updated specifications Dec 2010
2.2 Modified 3405PST LED functionality Feb 2011
2.3 Added requirements for NEBS documentation May 2013
Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof or for
the rights of third parties, which may be effected in any way by the use thereof. Any representations in this document concerning performance of
Evertz products are for informational use only and are not warranties of future performance, either expressed or implied. The only warranty
offered by Evertz in relation to this product is the Evertz standard limited warranty, stated in the sales contract or order confirmation form.
Although every attempt has been made to accurately describe the features, installation and operation of this product in this manual, no warranty
is granted nor liability assumed in relation to any errors or omissions unless specifically undertaken in the Evertz sales contract or order
confirmation. Information contained in this manual is periodically updated and changes will be incorporated into subsequent editions. If you
encounter an error, please notify Evertz Customer Service department. Evertz reserves the right, without notice or liability, to make changes in
equipment design or specifications.

3405 Frame Manual
3405FR Series Fiber Optic SFP Frame
Revision 2.3
TABLE OF CONTENTS
1. OVERVIEW ....................................................................................................................................1
1.1. 3405FR-BNC FRAME .........................................................................................................2
1.2. 3405FR-DIN FRAME...........................................................................................................3
1.3. 3405FR-XLINK FRAME ......................................................................................................4
2. INSTALLATION..............................................................................................................................5
2.1. 12V DC POWER (12V VERSIONS ONLY)..........................................................................6
2.1.1. Connecting a Redundant Power Supply...................................................................7
2.1.2. Connecting the 1RU Power Supply Tray (3405PS-6/+PS-6 option) .........................7
2.1.3. Connecting the Standalone Power Supply (3405PSX).............................................9
2.2. 48V DC POWER (48VDC VERSIONS ONLY)...................................................................10
2.2.1. Power Supply Status Indicators .............................................................................10
2.3. FAN INSTALLATION AND REMOVAL (3405FAN)...........................................................11
2.3.1. Cooling ..................................................................................................................12
2.4. CARE AND HANDLING OF OPTICAL FIBER ..................................................................13
2.4.1. Safety ....................................................................................................................13
2.4.2. Assembly...............................................................................................................13
2.4.3. Labeling.................................................................................................................14
2.4.4. Handling and Connecting Fibers............................................................................14
2.5. FIBER INPUT AND OUTPUT CONNECTIONS.................................................................15
2.5.1. Electro Static Discharge (ESD) Precautions ..........................................................16
2.5.2. 3405FR-BNC SFP Module Variants.......................................................................16
2.5.3. 3405FR-DIN SFP Module Variants ........................................................................17
2.5.4. 3405FR-XLINK SFP Module Variants....................................................................18
2.5.5. Installing an SFP Module.......................................................................................18
2.5.6. Removing an SFP Module .....................................................................................19
2.6. ELECTRICAL INPUT AND OUTPUT CONNECTIONS .....................................................19
2.6.1. Rear Panel BNC Connections................................................................................19
2.6.2. Rear Panel DIN Connections.................................................................................20
2.6.3. Rear Panel XLINK Connections.............................................................................20
2.6.4. 3405FR-BNC-48V and 3405FR-DIN-48V Rear Panels..........................................21
2.7. SERVICING INSTRUCTIONS ...........................................................................................22
2.8. REPLACING THE 3405PS-6 POWER SUPPLY...............................................................22
2.9. CHANGING THE FUSES..................................................................................................23
3. TECHNICAL SPECIFICATIONS...................................................................................................24

3405 Frame Manual
3405FR-BNC Fiber Optic SFP Frame
Revision 2.3
3.1. 3405FR-BNC FRAME.......................................................................................................24
3.2. 3405FR-DIN FRAME.........................................................................................................24
3.3. 3405FR-XLINK FRAME....................................................................................................24
3.4. COMMUNICATION AND CONTROL ................................................................................24
3.5. OPTICAL OUTPUT...........................................................................................................24
3.6. OPTICAL INPUT...............................................................................................................25
3.7. ELECTRICAL INPUTS (3405FR-BNC & 3405FR-DIN ONLY)..........................................25
3.8. ELECTRICAL OUTPUTS (3405FR-BNC & 3405FR-DIN ONLY)......................................25
3.9.PHYSICAL........................................................................................................................26
3.10. POWER (12V DC VERSIONS)..........................................................................................26
3.11. POWER (48V DC).............................................................................................................26
3.12. 3405PSX EXTERNAL POWER SUPPLY BRICK..............................................................26
3.13. 3405PS-6 1RU POWER SUPPLY TRAY ..........................................................................26
3.14. COMPLIANCE ..................................................................................................................27
4. STATUS AND LEDS.....................................................................................................................28
4.1.1. STATUS LED.........................................................................................................28
4.1.2. SFP Monitoring LEDs ............................................................................................28
5. CONFIGURATION AND CONTROL.............................................................................................30
5.1. 3405 FRAME CONTROLLER CONFIGURATION ............................................................30
5.2. VISTALINK®CONFIGURATION.......................................................................................32
5.2.1. General Tab...........................................................................................................32
5.2.2. TX/RX Configuration Tabs.....................................................................................34
5.2.2.1. Tx Configuration.......................................................................................36
5.2.2.2. Rx Configuration......................................................................................36
5.2.3. Faults Tab..............................................................................................................36
5.2.4. Network Parameters Tab.......................................................................................39
5.2.5. Trap Destination Tab .............................................................................................40
5.2.6. FC Faults Tab........................................................................................................40
6. VISTALINK®MONITORING/CONTROL.......................................................................................41
6.1. WHAT IS VISTALINK®?....................................................................................................41
6.2. VISTALINK®MONITORED PARAMETERS......................................................................41

3405 Frame Manual
3405FR-BNC Fiber Optic SFP Frame
Revision 2.3
6.3. VISTALINK® TRAPS .........................................................................................................42
6.4. VISTALINK® CONTROLLED PARAMETERS ...................................................................42
7. 3405 SERIES CWDM PASSIVE OPTICAL MODULES ................................................................44
7.1. OVERVIEW.......................................................................................................................44
7.1.1. 3405CWDM Coarse Wavelength Division Multiplexor............................................44
7.2. INSTALLATION ................................................................................................................48
7.3. SPECIFICATIONS.............................................................................................................51
7.3.1. Optical Input/Output...............................................................................................51
7.3.2. Physical .................................................................................................................51
Figures
Figure 1-1: 3405FR-BNC Frame............................................................................................................2
Figure 1-2: 3405FR-BNC Block Diagram...............................................................................................2
Figure 1-3: 3405FR-DIN Frame.............................................................................................................3
Figure 1-4: 3405FR-DIN Block Diagram ................................................................................................3
Figure 1-5: 3405FR-XLINK Frame.........................................................................................................4
Figure 1-6: 3405FR-XLINK Block Diagram ............................................................................................4
Figure 2-1: External Views of 3405FR-BNC...........................................................................................5
Figure 2-2: External Views of 3405FR-DIN ............................................................................................5
Figure 2-3: External Views of 3405FR-XLINK........................................................................................6
Figure 2-4: DC Power Connector to Frame and 3405PS-6....................................................................7
Figure 2-5: Locating the External 12V DC Power Connector .................................................................7
Figure 2-6: 3405PS-6 Power Supply Tray..............................................................................................8
Figure 2-7: 3405PSX Power Supply.......................................................................................................9
Figure 2-8: Locating the External 48V DC Power Connector ...............................................................10
Figure 2-9: 3405PST Status Indicators................................................................................................11
Figure 2-10: Front View of 3405FAN....................................................................................................12
Figure 2-11: Cooling Fan Installation and Removal..............................................................................13
Figure 2-12: Reproduction of Laser Certification and Identification Label ............................................14
Figure 2-13: 3405FR Front View with Fiber Inputs and Outputs...........................................................15
Figure 2-14: 3405T, 3405R, 3405T13-R, and 3405OO13-DA4 Evertz®SFP Modules.........................15
Figure 2-15: 3405FR-BNC Fixed Electrical Connections......................................................................19
Figure 2-16: 3405FR-DIN Fixed Electrical Connections.......................................................................20
Figure 2-17: 3405FR-XLINK Fixed Electrical Connections...................................................................20
Figure 2-18: 3405FR-BNC-48V Rear Panel.........................................................................................21
Figure 2-19: 3405FR-DIN-48V Rear Panel ..........................................................................................21
Figure 2-20: Power Supply Retaining Screw........................................................................................22
Figure 4-1: Front of 3405FC ................................................................................................................28
Figure 4-2: Front of 3405FC-2 .............................................................................................................29
Figure 5-1: 3405T13-2 VistaLINK®General Tab..................................................................................32
Figure 5-2: 3405T13-R VistaLINK®General Tab..................................................................................32
Figure 5-3: 3405OO13-DA4 VistaLINK®General Tab..........................................................................33
Figure 5-4: 3405R-2 VistaLINK®General Tab......................................................................................33
Figure 5-5: 3405R-2R VistaLINK®General Tab...................................................................................33

3405 Frame Manual
3405FR-BNC Fiber Optic SFP Frame
Revision 2.3
Figure 5-6: 3405T13-2 VistaLINK®TX Configuration Tab....................................................................34
Figure 5-7: 3405T13-R VistaLINK®TX Configuration Tab ...................................................................34
Figure 5-8: 3405OO13-DA4 VistaLINK®RX Configuration Tab ...........................................................35
Figure 5-9: 3405R-2 VistaLINK®RX Configuration Tab.......................................................................35
Figure 5-10: 3405R-2R VistaLINK®RX Configuration Tab...................................................................36
Figure 5-11: 3405T13-2 VistaLINK®Faults Tab...................................................................................37
Figure 5-12: 3405T13-R VistaLINK®Faults Tab ..................................................................................37
Figure 5-13: 3405OO13-DA4 VistaLINK®Faults Tab...........................................................................38
Figure 5-14: 3405R-2 VistaLINK®Faults Tab.......................................................................................38
Figure 5-15: 3405R-2R VistaLINK®Faults Tab....................................................................................39
Figure 5-16: 3405FC VistaLINK®Network Parameter Tab...................................................................39
Figure 5-17: 3405FC VistaLINK®Trap Destination Tab .......................................................................40
Figure 5-18: 3405FC VistaLINK®FC Faults Tab..................................................................................40
Figure 7-1: 3405CWDM-M8 Simplified Block Diagram.........................................................................45
Figure 7-2: 3405CWDM-M16 Simplified Block Diagram.......................................................................45
Figure 7-3: 3405CWDM-2-M16 Simplified Block Diagram ...................................................................46
Figure 7-4: 3405CWDM-2-M8 Simplified Block Diagram .....................................................................47
Figure 7-5: 8 Channel Breakout Cable.................................................................................................48
Figure 7-6: Wiring Diagram of the 3405CWDM-2-M16 and 3405CWDM-D16 .....................................50
Tables
Table 1-1: Frame Versions ....................................................................................................................1
Table 4-1: Status LED Chart................................................................................................................28
Table 4-2: SFP LED Chart...................................................................................................................28
Table 6-1: VistaLINK®Monitoring.........................................................................................................41
Table 6-2: VistaLINK®Traps................................................................................................................42
Table 6-3: VistaLINK®Controlled Parameters......................................................................................43
Table 7-1: Passive Optical Modules.....................................................................................................44
Table 7-2: 3405CWDM Model and The Associated Required Fanout Cable........................................49
Table 7-3: Insertion Loss Specifications...............................................................................................51