EVOLT EV360 User manual

EV360 USER MANUAL
Version 2.0
THE PERSONS RESPONSIBLE FOR PLACING DEVICES ON THE EC MARKET UNDER MDD 93/42/EEC
!"#$%!&'()*+,-).(/&01-2
344/&!,516(7189.7/&:;6(71898;/&<)(=(71/&>?3@A&B(C;D*5-&7E&F7.()
G"#H&IJ9?J9IKA9>@@@/&L%MH&IJ9?J9IN?9??NJ
OD(*56 62)2
PQ2 R(1(.)* S),56 4>2
P93@>@&P.;66(*6/&P(*85;T
Evolt IOH Pty Ltd
1/ 24 Leda Drive, Burleigh Heads, QLD
Australia 4220
V20 20211025

CONTENTS
INTRODUCTION ………………………………………………………………………….3
INTENDED USE ……………………………………………………………………………4
WORD DEFINITIONS. …………………………………………………………………….4
CLASSIFICATION AND COMPLIANCE …………………………………………………5
SAFETY PRECAUTIONS……………………………………………………………6, 7 & 8
SAFETY SYMBOLS AND INFORMATION ………………………………………….....9
TERM AND FUNCTION OF EACH PART ………………………………………10 & 11
SYSTEM SET UP………………………………….………………………12, 13, 14 & 15
USER EXPERIENCE………………………………………………………….16, 17 & 18
INSTALLATION …………………………………………………………………………..19
MEASUREMENT ANALYSIS…………………………………………………………… .20
Correct Posture ……………………………………………………………………21
Measurement analysis……………………………………………………………22
MEASUREMENT……………………………………………………………………23 & 24
RESULT INTERPRETATION………………………………………………………………25 & 26
STORAGE AND MAINTENANCE…………………………………………………………..27 & 28
ERROR AND REPAIR……………………………………………………………………29, 30 & 31
SERVICE…………………………………………………………………………………………….32
CORRECT HANDLING TECHNIQUE………………………………………………………33 & 34
CORRECT USE OF THE EVOLT 360………………………………………………………35 & 36
SCANNING PRECAUTIONS FOR THE EVOLT 360…………………………………….37 & 38
CHECKLIST………………………………………………………………………………………....39
SPECIFICATION…………………………………………………………………………………….40
2

INTRODUCTION
We highly appreciate that you have chosen our company’s product. You are
kindly requested to be familiar with these directions before using this product
and always keep it together with the product. In case you are not sure about any
directions or problems arising while using the product, please contact our service
center and we will provide you with detailed instructions.
3

INTRODUCTION
1. INTENDED USE
!"#$%&'(#)'%*'+$,-'$%#*.'&+/)'%01%0#2'3')4-#)+3%#*.'&+/)'%+/+31$#$%*'4"2&%+/&%.-2(#&'$%324$%25%#/52-*+62/%,$#/7%*'+$,-'&%#*.'&+/)'%+/&%#/.,8'&%.'-$2/+3%&+4+%9"'#7"4:%+7':%7'/&'-:%;'#7"4<=
>4%$"2;$%02&1%)2*.2$#62/%25%?@A:%B@?:%CB?:%C??:%!@D:%.-24'#/%*+$$:%*#/'-+3%*+$$:%'4)=%+/&%#/52-*+62/%-'7+-&#/7%@?>:%E@A:%@?F:%+0&2*#/+3%+/+31$#$:%!+-7'4%42%)2/4-23:%$'7*'/4+3%+/+31$#$:%@2&1%)2*.2$#62/%)"+/7':%
'4)=
2. WORD DEFINITIONS
!2%'/$,-'%$+5'%2.'-+62/%+/&%32/7%4'-*%.'-52-*+/)'%$4+0#3#41:%#4%#$%'$$'/6+3%4"+4%12,%5,331%,/&'-$4+/&%4"'%5,/)62/$:%2.'-+6/7 +/&%*+#/4'/+/)'%#/$4-,)62/$%01%-'+&#/7%4"#$%*+/,+3%0'52-'%2.'-+6/7%12,-%,/#4=%E+-6),3+-%
+8'/62/%*,$4%0'%.+#&%42%+33%;+-/#/7$:%)+,62/$%+/&%/24'$%#/)2-.2-+4'&%"'-'#/=
!"'%52332;#/7%)2/('/62/$%+-'%,$'&%4"-2,7"2,4%4"'%*+/,+3%42%&'/24'%#/52-*+62/%25%$.')#+3%'*."+$#$%
DGFH>HI JD+-/#/7K%%#/&#)+4'$%%#*.2-4+/4%%#/52-*+4#2/%%+02,4%%4"'%%.-'$'/)'%%25%%+%%
"+L+-&%;"#)"%*+1%)+,$'%$'('-'%.'-$2/+3%#/M,-1:%32$$%25%$,0$4+/4#+3%
.-2.'-41:%&+*+7'%#5
4"'%;+-/#/7%#$%#7/2-'&%
NGO!>PH
JN+,4#2/K%#/&#)+4'$%#*.2-4+/4%#/52-*+4#2/%+02,4%4"'%.-'$'/)'%25%+%"+L+-&%
;"#)"%*+1%)+,$'%*#/2-%.'-$2/+3%#/M,-1%2-%.-2.'-41%&+*+7'%#5%4"'%)+,4#2/%#$%
#7/2-'&%
HP!>NQ UV7+5-(W&51Q5-)+(6&5TC7.+)1+&51E7.T)+571&51&7.Q(.&+7&17+5EX&516+)**)+571/&7C(.)+571&7.&
T)51+(1)1-(&7E&+,56&Q(Y5-(2&UV7+5-(W&56&5TC7.+)1+&D;+&17+&,)Z).Q9.(*)+(Q2&')Z).Q&[).15186&).(&
17+&51-*;Q(Q&,(.(2
4

1) This device is classified as;
- Class 1 type-BF against electric shock
- Ordinary equipment without protection against ingress of water
- Equipment not suitable for use in presence of a flammable anesthetic mixture by standard of
IEC 60601-1: 2005+A1:2012(Basic safety and essential performance of Medical Electrical Equipment)
2) This device is complied with Class A for Noise-Emission, Level B for Noise-immunity, by standard of IEC 60601-1-2:2014(Electromagnetic Compatibility Requirements).
4. SAFETY PRECAUTIONS
This device is designed and manufactured with consideration of the safety of the operator and subject and also the reliability of the unit. The following warnings, precautions and notes must be observed for safety;
DGFH>HI
DGFH>HI
DGFH>HI
DGFH>HI
<;.518&T()6;.(T(1+&7E&+,(&D7QX&-7TC765+571/&)&T5-.7-;..(1+&7E&3I@\%&E*7[6&+,.7;8,&+,(&D7QX2&
01Q5Y5Q;)*6&[,7&,)Y(&)1X&]51Q&7E&5TC*)1+(Q&)-+5Y(&T(Q5-)*&Q(Y5-(6/&6;-,&)6&&C)-(T)](.6/&6,7;*Q&&
17+&&;6(&&+,56&&(^;5CT(1+&D(-);6(&+,(&&T5-.7-;..(1+&-)1&&-);6(&T)*E;1-+571&51&+,(&5TC*)1+(Q&
Q(Y5-(2
G7&C.(Y(1+&E5.(&,)Z).Q/&;6(&71*X&)&-7..(-+*X&[5.(Q&_3@@9J?@$%`a&7;+*(+/&)1Q&Q7&17+&;6(&)&b!O&
_b;*+5C*(&!7-](+&O;+*(+a&+,)+&56&17+&51&-7TC*5)1-(&[5+,&0"`&N@N@3932
G7&.(Q;-(&+,(&.56]&7E&(*(-+.5-&6,7-]&7.&C.7Q;-+&Q)T)8(/&1(Y(.&C*;8951&7.&C*;897;+&[5+,&[(+&,)1Q62
c,X65-)**X&Q56)D*(Q&C(.6716&6,7;*Q&17+&)d(TC+&+7&+)](&T()6;.(T(1+6&)*71(/&D;+&516+()Q&
6,7;*Q&,)Y(&+,(5.&-).(+)](.6&)6656+&+,(T&51&;6518&+,(&Q(Y5-(2
NGO!>PH
NGO!>PH
NGO!>PH
The unit must be operated only by, or under supervision of a qualified person with our
company or our distributors.
0E&X7;&,)Y(&(eC(.5(1-(Q&)1X&+.7;D*(&[5+,&+,(&;15+/&6[5+-,&5+&7EE&5TT(Q5)+(*X/&)1Q&-71+)-+&7;.&
-7TC)1X&7.&5+6&);+,7.5Z(Q&Q()*(.&E7.&)6656+)1-(2
0E&X7;&C*)1&+7&-711(-+&)1X&Q(Y5-(&E.7T&7+,(.&T)1;E)-+;.(.6&(*(-+.5-)**X&7.&T(-,)15-)**X&+7&&+,(&;15+/&&
-71+)-+&&7;.&-7TC)1X&7.&5+6&);+,7.5Z(Q&Q()*(.&E7.&516+.;-+5716&D(E7.(&Q7518&672&
S,(1&&X7;&&-711(-+&&-7TC;+(.&&7.&&7+,(.&&6X6+(T&&+7&&+,(&&;15+&&_B!9J>J`a/&&+,(&)++)-,(Q&6X6+(T6&
6,7;*Q&D(&+,76(&-(.+5E5(Q&DX&0"`&A4@&7.&(^;5Y)*(1+&6+)1Q).Q6&E7.&Q)+)&C.7-(66518&(^;5CT(1+2&
`71E58;.)+5716&6,)**&-7TC*X&[5+,&+,(&6X6+(T&6+)1Q).Q&0"`&N@N@393H&J@@4f%3HJ@3J2&"Y(.XD7QX&[,7&
-711(-+6&)QQ5+571)*&(^;5CT(1+&+7&+,(&6581)*&51C;+&C).+&7.&6581)*&7;+C;+&C).+&-71E58;.(6&)&T(Q5-)*&
6X6+(T&DX&6+)1Q).Q&0"`&N@N@393H&J@@4f%3HJ@3J2
0E&51&Q7;D+/&-716;*+&+,(&%g!&Q(C).+T(1+&7E&*7-)*&Q56+.5D;+7.2
5
CLASSIFICATION AND COMPLIANCE

NGO!>PH
NGO!>PH
%Y75Q&+,(&E7**7[518&(1Y5.71T(1+6&E7.&6+7.)8(h
9S,(.(&+,(&)TD5(1+&+(TC(.)+;.(&E)**6&D(*7[&9J4i`&7.&(e-((Q6&K@i`2
9S,(.(&+,(&)+T76C,(.5-&C.(66;.(&E)**6&D(*7[&K@]c)&_K@@TD).a&7.&(e-((Q
3@N]c)&_3@N@TD).a2
S,(.(&+,(&,;T5Q5+X&56&7Y(.&A>j&1719-71Q(165182
9S,(.(&+,(&;15+&56&(eC76(Q&+7&6C.)X&7.&6C*)6,518&[)+(.&
S,(.(&+,(&;15+&56&(eC76(Q&+7&Q;6+2
9S,(.(&+,(&;15+&56&(eC76(Q&+7&[)+(.&Y)C7.2
9S,(.(&+,(&;15+&56&(eC76(Q&+7&6)*+X&)+T76C,(.(2
9S,(.(&+,(&;15+&56&(eC76(Q&+7&(eC*765Y(&8)62
S,(.(&+,(&;15+&56&(eC76(Q&+7&(e-(665Y(&6,7-]6&7.&Y5D.)k7162
9S,(.(&+,(&)18*(&7E&51-*51)k71&7E&T7;1k18&6;.E)-(&(e-((Q6&3@&Q(8.((62
9S,(.(&+,(&;15+&56&(eC76(Q&+7&Q5.(-+&6;1*58,+2
This device needs special precautions regarding EMC and needs to be installed
and put into service according to the EMC information provided in the
ACCOMPANYING DOCUMENTS.
NGO!>PH
Cross contamination is possible because this equipment is used with bare
hands and feet. Refer to the cleaning and disinfecting methods in this
manual.
NGO!>PH Measurements may be impaired if this device is used near televisions, microwave ovens, X-ray equipment or other
devices with strong electrical fields. To prevent such interference, use the meter at a sufficient distance
from such devices or turn them off.
6

PROHIBITION
EFPR>@>!>PH
<7&17+&Q56)66(TD*(&7.&)*+(.&+,(&Q(Y5-(&;1Q(.&)1X&-5.-;T6+)1-(6/&)6&+,56&-7;*Q&
.(6;*+&51&(*(-+.5-&6,7-]&7.&51=;.X&)6&[(**&)6&)QY(.6(*X&)EE(-+&+,(&C.(-56571&7E&
T()6;.(T(1+62
G,56&Q(Y5-(&56&6C(-5E5(Q&)6&`*)66&3&+XC(&PL&;15+&;1Q(.&+,(&6+)1Q).Q&0"`&N@N@393H&
J@@4f%3HJ@3J&_P)65-&6)E(+X&)1Q&(66(1+5)*&C(.E7.T)1-(&7E&b(Q5-)*&"*(-+.5-)*&
"^;5CT(1+a2&G,(.(E7.(/&C)+5(1+6&T;6+&17+&+7;-,&7.&,)1Q*(&511(.&65Q(&7E&+,(&
6X6+(T&)+&)1X&+5T(2
EFPR>@>!>PH
EFPR>@>!>PH
<7&17+&+7&+7;-,&6581)*&51C;+/&6581)*&7;+C;+&7.&7+,(.&-711(-+7.6/&)1Q&+,(&C)+5(1+&65T;*+)1(7;6*X2
G,(&&&;15+&&&,)6&&&C.(Y57;6*X&&&D((1&&&)Q=;6+(Q&&&51&&&+,(&&&E)-+7.X&&&E7.&&&7CkT;T&C(.E7.T)1-(2
<7&17+&)d(TC+&+7&)Q=;6+&6[5+-,(6&7.&)1X&7+,(.&+,5186&(e-(C+&+,76(&6C(-5l(Q&51&+,56&T)1;)*&E7.&7C(.)k712&
V(Y(.&C7;.&)1X&*5^;5Q&Q5.(-+*X&71&+,(&6-)*(&C*)m7.T/&)6&5+&T)X&*()]&)1Q&-);6(&51+(.1)*&Q)T)8(2
Never jump on the Weighing Platform, there may be a risk of stumbling and malfunction of
the equipment.
EFPR>@>!>PH
NOTE G,56&(^;5CT(1+&,)6&D((1&+(6+(Q&)1Q&E7;1Q&+7&-7TC*X&[5+,&+,(&*5T5+6&E7.&T(Q5-)*&Q(Y5-(6&)--7.Q518&+7&
0"`&N@N@3939JHJ@3?2&G,(6(&*5T5+6&).(&Q(6581(Q&+7&C.7Y5Q(
.()671)D*(&C.7+(-+571&)8)516+&,).TE;*&51+(.E(.(1-(&51&)&+XC5-)*&T(Q5-)*&516+)**)+5712&&&G,56&(^;5CT(1+&
8(1(.)+(6&;6(6&)1Q&-)1&.)Q5)+(&.)Q57&E.(^;(1-X&(1(.8X&)1Q/&5E&17+&516+)**(Q&)1Q&;6(Q&51&)--7.Q)1-(&
[5+,&+,(&516+.;-+5716/&T)X&-);6(&,).TE;*&51+(.E(.(1-(&+7&7+,(.&Q(Y5-(6&51&+,(&Y5-515+X2&&&'7[(Y(./&+,(.(&
56&17&8;).)1+((&+,)+&51+(.E(.(1-(&[5**&17+&7--;.&51&)&C).+5-;*).&516+)**)+5712&0E&+,56&(^;5CT(1+&Q7(6&
-);6(&,).TE;*&51+(.E(.(1-(&+7&7+,(.&Q(Y5-(6/&[,5-,&-)1&D(&Q(+(.T51(Q&DX&+;.1518&+,(&(^;5CT(1+&7EE&
)1Q&71/&+,(&;6(.&56&(1-7;.)8(Q&+7&+.X&+7&-7..(-+&+,(&51+(.E(.(1-(&DX&71(&7.&T7.(&7E&+,(&E7**7[518&
T()6;.(6H
9B(7.5(1+&7.&.(*7-)+(&+,(&.(-(5Y518&Q(Y5-(2
901-.()6(&+,(&6(C).)+571&D(+[((1&+,(&(^;5CT(1+2
9`711(-+&+,(&(^;5CT(1+&51+7&)1&7;+*(+&71&)&-5.-;5+&Q5EE(.(1+&E.7T&+,)+&+7&[,5-,&+,(&7+,(.&Q(Y5-(_6a&).(&
-711(-+(Q2
9`716;*+&+,(&T)1;E)-+;.(.&7.&E5(*Q&6(.Y5-(&+(-,15-5)1&E7.&,(*C2
HP!Q
HP!Q
HP!Q%
c*)-(&+,(&S(58,518&c*)m7.T&71&)&*(Y(*&)1Q&6+)D*(&6;.E)-(2&0E&+,(&(^;5CT(1+&56&;6(Q&[,(1&+,(&
S(58,518&c*)m7.T&56&;16+)D*(&D(-);6(&17+&)**&E((+&).(&71&+,(
6;.E)-(/&+,(.(&T)X&D(&)&.56]&7E&6+;TD*518&7.&51)--;.)+(&T()6;.(T(1+2
V7+(&&+,)+&&C7.+)D*(&&)1Q&&T7D5*(&&BL&&-7TT;15-)+5716&&(^;5CT(1+&&-)1&&)EE(-+
b"<0`%#&"#"`GB0`%#&"no0cb"VG2
`716;*+&&)&&C,X65-5)1&&7.&&)&&+.)51(Q&&,()*+,&&C.7E(66571)*&&E7.&&51+(.C.(+)k71&&7E&T()6;.(T(1+&.(6;*+62
7

NOTE
DGFH>HI
01&-)6(&7E&C)+5(1+6&[,7&,)Y(&-(.+)51&Q56()6(6/&+,(&(6+5T)+(6&T58,+&D(&Q5EE(.(1+&
EFPR>@>!>PH
EFPR>@>!>PH
.2
<7&17+&T7Q5EX&+,56&(^;5CT(1+&[5+,7;+&);+,7.5Z)+571&7E&+,(&T)1;E)-+;.(.2
`711(-+&+,(&().+,&C*)-(Q&71&+,(&D)-]65Q(&7E&+,56&Q(Y5-(&+7&+(.T51)*&C*)+(&+7&C.(Y(1+&)1X&(*(-+.5-&
6,7-]&E.7T&*()])8(&-;..(1+&7.&)&C7+(1+5)*&Q5EE(.(1-(2
G7&)Y75Q&+,(&.56]&7E&(*(-+.5-&6,7-]/&+,56&(^;5CT(1+&T;6+&71*X&D(&-711(-+(Q&+7&6;CC*X&T)516&[5+,&
C.7+(-+5Y(&().+,2&
8

5. SAFETY SYMBOLS AND INFORMATION
The International Electro-technical Commission (IEC) has established a set of symbols for medical electrical equipment which classify a connection or warning of
any potential hazard. The classifications and symbols are shown below. Save these instructions for your safety.
9

!"#$%&'()*+#,-.#/0+*1.-2(3)+4*#*-25(46&0&17#8/9:;
!"#$%&'($)*+#(#,"("&"-#.*/$01"2-(-*/3$2)%&%#4(56789(*:(#,"(6;(
<=>($."(0%?"1()"&*@A(B":*."(+'%10(#,"(6;(<=>C()"('+."(#*(."$D(
$1D(+1D".'#$1D(#,"(:*&&*@%10(%1:*./$2*1A
<;#$%&'()*+#()'#2()%,(*1%.+.=>#'+*0(.(4-)#?+0+*1.-2(3)+4*#
+2&>>&-)>
E,"(6;(<=>(%'(%1#"1D"D(:*.(+'"(%1(#,"("&"-#.*/$01"2-(
"1?%.*1/"1#('3"-%F"D(G68(=>=>HIHIJKJ>HL(5M*+.#,(6D%2*19A
@;#$%&'()*+#()'#2()%,(*1%.+.=>#'+*0(.(4-)#?+0+*1.-2(3)+4*#
&22%)&17
E,"(6;(<=>(%'(%1#"1D"D(:*.(+'"(%1(#,"("&"-#.*/$01"2-(
"1?%.*1/"1#('3"-%F"D(G68(=>=>HIHIJKJ>HL(5M*+.#,(6D%2*19A
A;#$%&'()*+#()'#2()%,(*1%.+.=>#'+*0(.(4-)#?+0+*1.-2(3)+4*#
&22%)&17#@
E,"(6;(<=>(%'(%1#"1D"D(:*.(+'"(%1(#,"("&"-#.*/$01"2-(
"1?%.*1/"1#('3"-%F"D(G68(=>=>HIHIJKJ>HL(5M*+.#,(6D%2*19A
B;#C+*-22+)'+'#>+5(.(4-)#'&>1()*+>#6+1D++)#5-.1(60+#()'#
2-6&0+#CE#*-22%)&*(4-)>#+F%&52+)1#()'#1G+#/H#A!I
E,"(6;(<=>(%'(%1#"1D"D(:*.(+'"(%1(#,"("&"-#.*/$01"2-(
"1?%.*1/"1#('3"-%F"D(G68(=>=>HIHIJKJ>HL(5M*+.#,(6D%2*19A
10

TERM & FUNCTION OF EACH PART
FRONT
PART
Color LCD panel as touch screen.
-Displays the procedure and results.
Handle Electrode
- Handle Electrode measure the impedance by sending harmless electric current to the body. Hold
them with the hands during measurement.
'%V<#"&"#"`GBO<"
COLOUR LCD
11

pc7[(.&6[5+-,&_cOS"BaH&0+&-)1&D(&;6(Q&+7&+;.1&71g7q&+,(&C7[(.2
pS0L0&C7.+H&`711(-k18&+,(&S59L5&<718*(2&_OcG0OVa
pP*;(+77+,&C7.+H&`711(-k18&+,(&P*;(+77+,2&_OcG0OVa
pc.51+(.&C7.+H&`711(-k18&+,(&C.51+(.&7q(.(Q&[5+,&+,56&Q(Y5-(2
Cau$on
<7&17+&+7;-,&+,(&C)k(1+&[,5*(&7C(.)k18&+,(&.().&C)1(*2
REAR
PART
BASE
PART
Weight scale (Applied Part)
Plate electrode (Applied Part)
▪ Weight scale: It consists of four plate electrodes and it measures weight.
▪ Plate electrode: It measures the impedance. The user should step it in bare feet. 12

13
SYSTEM SET UP
CONTROL PANEL
• Click “Operator Panel” • Enter your Operator Email and Password
• Click “Save”

SYSTEM SET UP
OPERATOR CONFIGURATION
• Click the location drop down box and click the
desired location.
• Click “Unattended”
• Choose the desired print mode
• Choose the desired volume
• Click “Save Configuration”
14
SCALE CONFIGURATION
• Ensure Abdominal Circumference is in the “ON”
position
• Ensure Abdominal Obesity over 18 is in the “ON”
position
• Set the Measurement mode to “Precision”
• Set the Weight of Clothes at “0.3kg”
• Click “Save”

• Ensure Abdominal
Circumference is in the “ON”
position
• Ensure Abdominal Obesity
over 18 is in the “ON” position
• Set the Measurement mode to
“Precision”
• Set the Weight of Clothes at
“0.3kg”
• Click “Save”
SYSTEM SET UP
15

SYSTEM SET UP
NETWORK CONFIGURATION
• Click the Wi-Fi in the “ON” position
• Click “New Connection”
• Find your desired Wi-Fi location and Click “Quick
Connect” to insert your password details
Note. The system should show 100Connected
CONNECTING PRINTER
• Ensure your printer is connected to the same Wi-
Fi connection as the EV360
• Click “Printer"
• Click “Add Printer”
• Click on your printer as listed
16

🥵
Voice activated instructions
USER EXPERIENCE
17
Access the Kiosk as a new Member via ”sign up
and scan” or an existing Member via “login and
scan”
Enter new Member details Enter new Member details
Enter new Member details Enter new Member Goal details Enter new Member Body Type details

🥵
Voice activated instructions
USER EXPERIENCE
18
Enter new Member activity level details Enter new Member activity type details Accept Member terms and conditions to continue
Member prompted to stand on device Member prompted to make contact with tactile
points
Member weighed

🥵
USER EXPERIENCE
Voice activated instructions
19
Progression shown during scanning Once completed, print out shown

20
INSTALLATION
•Power Supply
Connect the power cable to the ‘ADAPTER INPUT’ placed on the lower back panel of the device.
Connect the cable. Turn on the power switch placed next to Power input, then after moment initial
screen animation is displayed automatically.
Caution
1. Before connecting a peripheral device to the device, the power should be turned off. Otherwise the
devices can be damaged by electric shock or malfunction.
2. When the device and the peripheral devices are connected each other, the order of turning of the
devices should start from the device to keep the functions and safe of the device.
3. This device should be only powered through the cable provided by OUR OMPANY.
4. Be careful not to touch the base part of the scale when switching on the device. If at turning on the switch
loads any weight on plate electrode, a measuring error might occur with the scale’s zero point.
5. Do not install the equipment where power can not be disconnected.
2) Connecting Printer
①Connecting the device and the printer directly
Connect A4 printer offered with this device to the “USB(A)” port placed on the rear panel of this
device with USB cable.