evowera planck O1 User manual

Quick Start Guide
v1.0 2020.7

Disclaimer and Warning
Important
Danger
Warning
Congratulations on purchasing your new
evowera planck O1 adaptive control sonic
electric toothbrush (hereinafter referred to as
'product'). Read this entire document carefully to
ensure proper configuration before use and it is
recommended to keep this document for future
reference. This product is a personal care device.
By using this product, you hereby agree to this
disclaimer and signify that you have read it fully.
Please use this product in strict accordance with
the document, user manual, related regulations,
terms of use and be sure to pay attention to the
Important.
Shenzhen EVOWERA Technology Co., LTD assume
no liability for damage(s) or injuries incurred
directly or indirectly from improper use of this
product. Misuse includes, but is not limited to,
using unapproved chargers, or modifying the
product.
evowera and planck are trademarks of Shenzhen
EVOWERA Technology Co., LTD (abbreviated as
“evowera”). Names of products, brands, etc.,
appearing in this document are trademarks or
registered trademarks of their respective owner
companies. This product and document are
copyrighted by evowera with all rights reserved.
No part of this product or document shall be
reproduced in any form without the prior written
consent or authorization of evowera.
This disclaimer is produced in various languages.
In the event of divergence among different
versions, the Chinese version shall prevail when
the product in question is purchased in China, and
English version shall prevail when the product in
question is purchased in any other countries or
regions.
- Keep the power adapter away from water.
DO NOT place the power adapter over or near any
container with water. DO NOT drop the power
adapter into water or any kind of liquid. After
cleaning, make sure the power adapter is
completely dry before connecting it to a power
outlet.
- Always use officially approved power adapter to
charge to avoid electric hazards.

© 2020 evowera All Rights Reserved.
- DO NOT use the power adapter outdoors or
near heated surfaces.
- If any part of this product gets damage in any
form (e.g:brush head, handle, charging base or
power adapter), stop using it immediately.
- DO NOT let children use, clean or maintain this
product without supervision.
- DO NOT let children play with this product.
- DO NOT clean the brush head, the handle, the
charging base or the power adapter in the
dishwasher.
- Consult your dentist before using this product
if you have had oral or gum surgery in the previous
two months.
- Consult your dentist if excessive bleeding occurs
after using this product or if bleeding continues to
occur after one week of use or if you feel
discomfort or pain when using planck O1.
- planck O1 complies with the safety standards
for electromagnetic devices. If you have a
pacemaker or other implanted device, contact
your physician or the device manufacturer of the
implanted device before use.
- If you have medical concerns, consult your doctor
prior to use.
- This product is only designed for cleaning teeth,
gums, and tongue. DO NOT use it for any other
purpose. If you experience any discomfort or pain,
stop using this product and contact your doctor.
- planck O1 is a personal care device, and is not
intended to used by dental clinics or institutions
for multiple patients.
- Stop using a brush head with crushed or bent
bristles or when planck O1 reminds you the brush
head has exceeded its lifespan. DO NOT use other
brush heads than the ones recommended by the
manufacturer.

Overview
FrontBack
1
2
3
4
5
6
8
9
10
11
12
13
7
Power Adapter
USB Port
Power Connector
Quick Start Guide
Brush Head
Hygienic Brush Head Cap
Charging Dock
USB Connector
Handle
Metal Shaft
Function Button(Mode/Force)
On/Off Button
LCD Screen
1
2
3
4
5
6
7
8
9
10 13
12
11

© 2020 evowera All Rights Reserved.
Charging
Charge the toothbrush before first use. While
charging, please note:
To ensure optimal usage experience and to enjoy
better after-sales service, please follow the steps
below to activate the toothbrush using evowera
app before first use.
- Press function button once or press on/off button
once or slightly shake the toothbrush to wake it up.
Scan the QR code below or go to app store to
download evowera app. Please follow the
instruction, register, and log in evowera account.
Gently place the toothbrush
on the charging dock to avoid
the toothbrush from being
damaged.
QR Code
Make sure to connect the
charging base to a AC power
outlet of a voltage between
100 to 240 V, frequency
between 50-60Hz.
Wake up the toothbrush
- Launch evowera app and log in. Enter device connection
page, and then place your toothbrush near your phone.
Follow the prompts to complete activation.
Note: Make sure your mobile device is connecting to the internet
during activation. Retry if activation fails. Contact evowera if
activation fails for several times.
Connection and Activation
12
Downloading and Installing evowera
App
Activating

Button configuration Device connection
configuration
Function Button
(Mode/Force)
on/off button
planck O1
connect
Basic Operations
Press on/off button to switch on the toothbrush
after it has been woken up.
Brushing Teeth
After waking up your toothbrush, when the LCD
screen is displaying home page and the toothbrush
has not started working:
Selecting Brushing Mode
- Level by level: the brushing force
will increase to a higher level every
time you press function button.
Note that when the brushing force
reaches the highest safe level, it
will go down to the lowest if you
press function button again.
- Skip through levels：Press and hold function button,
and the brushing force will increase continuously until
you release function button. Note that when the
brushing force reaches the highest safe level, it will go
down to the lowest and then increase again.
Adjusting Brushing Force
Press function button once to enter mode setting
page. Follow the prompts and short press function
button to select the mode.
Press and hold function button to confirm mode and
exit to home page. Press on/off button once to start
teeth brushing.
1
2
When the brush head is vibrating:
Checking Tooth-brushing Data
Press on/off button once to stop the brush head
vibration. The LCD screen will enter “Coverage” page.
Press function button once to enter “Rating” page.
1
2
Press function button again to return to home page.
3
Clean
Adaptive
White
Sensitive
Comfort
Therapy
Note: You can only adjust the brushing
force while using the toothbrush.

© 2020 evowera All Rights Reserved.
Using the Toothbrush
When the LCD screen is displaying home page and
the brush head has not started vibrating yet:
Recording Your Periods
Press and hold function button for 3 seconds to
enter “Female Period Tracker” page.
Following the prompts, press and hold function
button to record your period. The notice of ‘’record
with success’’ will appear on the LCD screen.
1
2
Check the LCD screen to see if you successfully record
your period. If not, follow the instructions to retry.
*The LCD screen will return to
home page if the toothbrush
is idle for a while.
3
When the toothbrush is waking up, but not
vibrating：
Press function button twice to check record about
your previous tooth brushing.
Press function button again to return to home page.
1
2
Start
tracking?
6.29
Follow the steps below to use the toothbrush:
Attach the brush head Wet the bristle
Apply a small amount of
toothpaste
Place the toothbrush bristles
against the teeth at a slight
angle (around 45 degrees)
Switch on the vibration Gently move the brush head
slowly across the teeth.
12
43
5 6
45
180

Cleaning
- orthodontic appliances (it will accelerate bristle wear)
- restored tooth (dental filling, teeth crown, porcelain
teeth)
planck O1 can be safely used with:
Remove the brush head，rinse the mental shaft area.
Be sure to remove any remaining toothpaste.
Use wet wipe to clean the handle.
1
2
After each use, rinse the brush head and bristle.
3
Remove brush head from handle, rinse the joint area
at least once a week.
4
Use wet wipe to clean wireless charging dock and
adapter. Be sure to remove any remaining toothpaste
or other residues.
5
Storage
If you are not going to use the toothbrush for an
extended period, unplug the charging base from
the wall socket. Clean the toothbrush thoroughly
and store it in a cool and dry place away from
direct sunlight.
Specifications
Product Name: planck O1 Adaptive Sonic Electric
Toothbrush
Product Model: planck O1
IP Rating: IPX7
Rated Voltage: 7.4V
Rated Power: 4.0 W
Operating Frequency: 2.402– 2.48GHz
EIRP: ≤2dBm
SAR: 000
Battery Capacity: more than 1040 mAh
Charger Input: 100 ~ 240V，50 ~ 60 Hz，≤ 350mA
Manufacture:SHEN ZHEN EVOWERA TECHNOLOGY
CO.,LTD

© 2020 evowera All Rights Reserved.
Launch evowera app and tap to select “Mail-in Repair
Service”. Fill in and submit the form.
If you have already submitted your request for mail-in
repair service, tap “Status” to check the repair
progress.
1
2
Brush Heads
Damage caused by use of unauthorized replacement
parts.
1
2
Damage caused by misuse, abuse, neglect, alterations
or unauthorized repair.
3
Normal wear and tear, including but not limited to
chips, scratches, abrasions, discoloration or fading.
Visit evowera official website to see detailed
information on warranty policies.
4
Warranty and Support
Warranty and Support
If you encounter any problem in using the
toothbrush while having no time to go to local
evowera authorized dealer for support, feel free
to request mail-in repair service provided by
evowera.
How to apply for mail-in repair service
The terms of the international warranty do not
include the following:
Via evowera app:
This content is subject to change.
Download the latest version from
http://www.evowera.com/plancko1

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Compliance Information
FCC Compliance Notice
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This transmitter must not be co‐located or operating
in conjunction with any other antenna or transmitter.
Radiation Exposure Statement
Any changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
Shenzhen EVOWERA Technology Co.,Ltd. hereby declares
that this device is in compliance with the essential
requirements and other relevant provisions of the RED
Directive.
A copy of the EU Declaration of Conformity is available
online at www.evowera.com .
EU Compliance Statement