Excalibur POWERSPORTS AL-1070-PS Operating instructions

AL-1070-PS Wire Diagram
Tech Support
Phone: 800-921-TECH (8324)
Web: OmegaDealer.com
FB dealer group: Facebook.com/groups/omegadealer
Corporate Site / Product Info: CarAlarm.com
MAIN HARNESS COLOR POL. FUNCTION
RED (+) 12V Constant - INPUT (5A Fused)
BLACK (-) System Ground - Input
YELLOW (+) 12V Ignition - INPUT
BROWN (+/- Programmable) Siren/Horn - OUTPUT (500ma) See Feature #7
WHITE (Selectable) Light Flash - OUTPUT
WHITE/RED (+/-) Light Flash Polarity- INPUT (15A Fused)
BLACK/ORANGE (x2) (Relay) Starter Interrupt - INPUT/OUTPUT
VIOLET/WHITE (x2) N/A Normally Closed Trigger Loop - INPUT/OUTPUT
BLUE (-) Instant Trigger - INPUT
RED/WHITE (-) AUX - OUTPUT
BLACK/WHITE N/A Antenna - DO NOT CUT or CONNECT
Status LED
Starter Interrupt Wiring
StarterIgn. Switch
BLACK/ORANGE
Cut Starter Wire
BLACK/ORANGE
AL-1070-PS
Main Harness
Trigger Loop Wiring
Wire loop thru cargo or helmet carrier
AL-1070-PS
Main Harness
Disconnect
bullet
connectors
to loop
thru cargo,
helmet, etc.
VIOLET/WHITE VIOLET/WHITE

1. Disarm the system.
2. Turn the ignition “ON” fi ve time within 15 seconds (remaining in the “ON” position).
- After 3 seconds the horn will briefl y sound.
3. Turn the ignition “OFF” and “ON” again.
- The siren will chirp 2 times indicting the system is in feature programming.
4. Press the “ARM” button to select the desired feature.
- The siren will chirp equal to the current setting of the feature selected.
- The LED will fl ash equal to the current feature selected.
- EXAMPLE: Press arm once for feature #1, the LED will fl ash 1 count and the siren will chirp
equal to the current option selected for feature 1. Press arm again for feature #2, the LED will
fl ash 2 count and the siren will chirp equal to the current option selected for feature 2. Press
arm again for feature #3, etc.
5. Press the “DISARM” button to select the setting of the selected feature.
- Each press of the disarm button will scroll thru the feature options.
- EXAMPLE: Press the disarm button 1x, then you’ll hear 2 chirps for the second option. Press
the disarm button 1x, then you’ll hear 3 chirps for the third option.
6. Repeat steps 4 & 5 at this time IF you wish to change any additional features.
7. Turn the ignition “OFF” to exit programming.
- 5 seconds after ignition “OFF” the siren will sound indicating programming exit.
- NOTE: The system will exit automatically at any time after 30 seconds of no activity.
AL-1070-PS QUICK REFERENCE
PROGRAMMING GUIDE
visit www.OmegaDealer.com to download a complete guide
Programming Features
Feature Chart
1. Enter Feature Programming (described above).
2. Press the “ARM” button to choose Feature #12.
3. Press the “DISARM” button to reset all feature to default.
Features Reset
Use this method to program additional or replacement transmitters.
BEFORE YOU BEGIN: Have all transmitters which are to operate the system at hand.
1. Disarm the system.
2. Turn the ignition “ON” fi ve time within 15 seconds (remaining in the “ON” position).
- After 3 seconds the horn will briefl y sound
3. Press and release any button on each transmitter one after the other.
- The siren will chirp for each transmitter learned (MAX: 4).
- NOTE: When a 5th transmitter is learned the fi rst transmitter is erased and so on.
- NOTE: All button functions will automatically be assigned.
4. Turn the ignition “OFF” to exit programming.
- 5 seconds after ignition “OFF” the siren will sound indicating programming exit.
- NOTE: The system will exit automatically at any time after 30 seconds of no activity.
Programming Transmitters
Light Flashes Violated Zone
4 Tilt or Shock Sensor
5Instant Trigger wire (Blue)
6 Loop wire (Violet/White)
7Ignition turned “ON”
If the alarm triggers, disarm/unlock the alarm with the remote and the parking lights will fl ash to
indicate which zone(s) were triggered last. Turn the ignition key “ON” to clear memory.
Alarm Trigger Zone Diagnostics
REMOTE START & SECURITY PERFECTED
Programmable Features: Ignition off/on 5 times, short chirp, Ignition off/on again
# Feature Chirp 1x Chirp 2x Chirp 3x Chirp 4x Chirp 5x Chirp 6x Chirp 7x Chirp 8x
1 Passive Starter Interrupt OFF ON
2 Automatic Rearming OFF ON
3 Anti-Hijacking Off On
4 TILT Sensor Sensitivity 1° 5° 15° 30°
5 Confi rmation Chirps On Off
6 Chirp Volume Low Med High
7 Siren/Horn Trigger Output Siren (+) Horn (-) Low Horn (-) Med Horn (-) High Horn (-)
Human Panic!
8 Arm/Disarm Light Confi rmation On Off
9 SHOCK Sensor Sensitivity Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Level 7 Off
10 Aux Output Operation Pulse Latched Latched w/
IGN Reset
11 Override Mode Valet Secure Code
12 System Reset Default
FEATURE SETTING KEY: Default Setting
Copyright 2019 Omega Research & Development Technologies, Inc. QIM_RS-1070-PS_20190911
Tech Support
Phone: 800-921-TECH (8324)
Web: OmegaDealer.com
FB dealer group: Facebook.com/groups/omegadealer
Corporate Site / Product Info: CarAlarm.com