Excalibur rS-350-eDPb User manual

RS-350-EDPB
Deluxe Keyless Entry & Remote Start
June 25, 2013
Operation Guide
Temporary cover. Color cover is in a separate  le.

2
Table Of Contents
Transmitter Overview ��������������������������������������������������������������������������������������������������� 3
The Transmitter �������������������������������������������������������������������������������������������������������� 3
Transmitter Functions��������������������������������������������������������������������������������������������������� 3
Other Remote Start Features ��������������������������������������������������������������������������������������� 6
Low Battery/Low Temp Automatic Starting��������������������������������������������������������������� 6
Turbo Timer Feature������������������������������������������������������������������������������������������������� 7
Pit-Stop Feature ������������������������������������������������������������������������������������������������������� 7
Manual Transmission Starting ���������������������������������������������������������������������������������� 7
Passive Arming/Locking Features �������������������������������������������������������������������������������� 7
Last Door Arming������������������������������������������������������������������������������������������������������ 7
Automatic Rearming������������������������������������������������������������������������������������������������� 7
Using The Valet Switch������������������������������������������������������������������������������������������������� 8
Emergency Override ������������������������������������������������������������������������������������������������ 8
Valet Modes�������������������������������������������������������������������������������������������������������������� 8
SecureCode ������������������������������������������������������������������������������������������������������������� 8
The Status Light ����������������������������������������������������������������������������������������������������������� 9
Anti-Carjacking Protection������������������������������������������������������������������������������������������ 10
Programming Transmitters ������������������������������������������������������������������������������������������11
Programming Features����������������������������������������������������������������������������������������������� 12
User Programmable Features ������������������������������������������������������������������������������������ 12
Installer Programmable Features ������������������������������������������������������������������������������� 16
Programmable Features Matrix���������������������������������������������������������������������������������� 19
This device complies with FCC Rules part 15� Operation is subject to the following
two conditions, (1) This device may not cause harmful interference and, (2) This
device must accept any interference that may be received, including interference
that may cause undesired operation�
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modications to this equipment. Such modications could void the
user’s authority to operate the equipment.

3
THE TRANSMITTER
Transmitter Overview
1) Antenna
2) Lock Button
3) Unlock Button
4) Trunk Button
5) Start Button
1
5
2
LOCK: Press and release the “LOCK” button�
THE HORN WILL CHIRP ONCE (SELECTABLE) & THE•
PARKING LIGHTS WILL FLASH ONCE�
3
Transmitter Functions
4
UNLOCK: Press and release the “UNLOCK” button�
THE HORN WILL CHIRP TWICE (SELECTABLE) & THE•
PARKING LIGHTS WILL FLASH TWICE THEN ILLUMINATE
FOR 30 SECONDS�
Part number: 147-03
Call your dealer or visit www.caralarm.com to
order replacement transmitters.
Transmitter battery replacement:
Remove the small screw from the lower
back case, and separate the transmitter
halves� Replace the battery(ies) and reas-
semble the transmitter case�
Battery Types:
147-03 - CR2016 (2 required)

4
Transmitter Functions (cont’d)
TRUNK RELEASE / CHANNEL 2: Press the “TRUNK” button for 3
seconds�
THE SYSTEM WILL UNLOCK AND THE TRUNK WILL•
OPEN (IF EQUIPPED)�
REMOTE START: Press and release the “START” button twice
within 5 seconds� (see user feature #17 for additional options)
THE PARKING LIGHTS WILL FLASH ONCE AND THE•
STATUS LIGHT WILL FLASH RAPID GREEN�
THE SYSTEM WILL TURN ON THE IGNITIONS AND•
PROCEED TO START THE ENGINE�
ONCE THE ENGINE IS RUNNING, THE PARKING•
LIGHTS WILL TURN ON AND STAY ON AND THE STATUS
LIGHTS WILL FLASH SLOW GREEN�
If the engine stalls, the system will make up to 3 more attempts�•
Each time you park, set the climate controls as desired when you use the remote start� The•
engine will run for the preset run time (see user feature #18)�
Run Time Extender• : Press the “START” button one time during remote start to restart the
engine run timer�
NOTE: This can only be used once per remote start cycle.
If you decide not to drive your vehicle, you can turn off the remote start using the same method•
to turn it on (Default = press “START” twice in 5 seconds)
NOTE: If user feature #17 is programmed for 1 press, the 1st press = Run Time Extender so
an additional press is required.
Upon entering the vehicle during remote start mode, turn the ignition key to the “ON/RUN” posi-•
tion (NOT START!!)� When you press the brake pedal, the remote start will turn off allowing the
ignition key to take over�
x2
CHANNEL 3: Press and hold the “TRUNK” & “START“ buttons for 3
seconds�
YOUR SYSTEM WILL ACTIVATE THE CHANNEL 3•
OUTPUT�

5
Transmitter Functions (cont’d)
CHANNEL 4: Press and hold the “LOCK” & “TRUNK” buttons for 3
seconds�
YOUR SYSTEM WILL ACTIVATE THE CHANNEL 4•
OUTPUT�
CHANNEL 5: Press and hold the “UNLOCK” & “START“ buttons for
3 seconds�
YOUR SYSTEM WILL ACTIVATE THE CHANNEL 5•
OUTPUT�
PANIC: Press and hold the “LOCK” or “UNLOCK” button for 3
seconds�
THE SIREN/HORN WILL SOUND, THE PARK-•
ING LIGHTS WILL FLASH, AND THE DOORS WILL
LOCK OR UNLOCK DEPENDING WHICH BUTTON IS
PRESSED�
OR
SILENT LOCK / UNLOCK: Press and release the “TRUNK” button
twice in 5 seconds�
THE PARKING LIGHTS WILL FLASH, AND THE•
DOORS WILL LOCK OR UNLOCK DEPENDING ON THE
CURRENT SYSTEM STATUS�
x2
REMOTE VALET: Press and release the “START” button within 5
seconds of unlocking system�
THE SYSTEM WILL ENTER VALET MODE�•
SEE PAGE 8 FOR MORE INFO ON VALET MODES�
1
2

6
Transmitter Functions (cont’d)
AUXILIARY FUNCTIONS 1-4:
The actual operation of these functions will vary from car to car� They are designed to operate
extra functions like automatic sliding doors or motorized hatches� Aux 1-4 are virtual outputs only
available when this system is integrated with the vehicle’s data network� Consult with your installer
to  nd out if any of these functions are available then con rm each operation and write them
below�
- Auxiliary 1 Function (___________________): To activate this function, press and release the
“trunk” and “start” buttons simultaneously)�
- Auxiliary 2 Function (___________________): To activate this function, press and release the
“lock” and “trunk” buttons simultaneously)�
- Auxiliary 3 Function (___________________): To activate this function, press and release the
“unlock” and “start” buttons simultaneously)�
- Auxiliary 4 Function (___________________): To activate this function,
press and release the “unlock” and “trunk” buttons simultaneously)�
LOW BATTERY/LOW TEMP AUTOMATIC STARTING
Other Remote Start Features
This feature will automatically start the engine if the vehicle battery drops below 11 volts or the
interior temperature drop to 15 (or 32) degrees fahrenheit� You must activate these features each
time you park your car to use them� They can be activated one of two ways:
Method 1 - Valet Switch
• Turn the ignition switch “on”, then “off” (engine not running), and within 7 seconds press the
valet switch twice� If there is a 2 second delay without additional valet button presses, the horn
will honk 3 times activating low voltage start mode�
• To activate low temp starting, enter low voltage start mode as described above but, before the
horn honks, press the valet switch 1 time (15 degrees) or 2 times (32 degrees) within 5
seconds. The horn will honk to con rm your selection.
Method 2 - With The Controller (Low Volt + Low Temp - 15 Degrees Only)
• Within 5 seconds of pressing LOCK, press the START button. You will get one chirp and the
2-way controller will alternate between “ARM” and “RS AUTO”�
NOTE: When low temp start mode is activated, low voltage start is also activated� These features
will operate once every two hours until the ignition key is turned “ON”�
LOW VOLTAGE/TEMP AUTO START: Press and release the
“START” button within 5 seconds of locking the system�
THE SYSTEM WILL GIVE ONE CHIRP TO INDICATE•
THE LOW VOLT/LOW TEMP(15 DEGREE ONLY) AUTO-
START IS ACTIVATED� SEE BELOW FOR MORE INFO�
2
1

7
TURBO TIMER FEATURE
PIT-STOP FEATURE
This feature allows you to leave your engine running for making quick errands. To use this fea-
ture, have the engine running normally from the ignition switch and your foot off the brake pedal�
Press the Valet Switch twice; the parking lights will ash and the horn chirps 5 times. Turn the key
off and the engine will remain running for the programmed run time�
MANUAL TRANSMISSION STARTING
Remote starting with a manual transmission requires a different installation method and
installer feature #5 must be turned on� Also, a setup procedure that ensures the transmission was
left in neutral must be performed each time you leave your vehicle and intend to use remote start
later� Perform these steps:
1) With the engine running, hold the brake pedal, apply the parking brake, then release the brake
pedal�
2) Use the transmitter as if you were activating remote start (default: press START twice)� The
green status light will start to ash slow.
3) Turn off the ignition key and exit the vehicle�
4) Press LOCK on the transmitter� The engine will shut down (unless turbo timer is on) and the
status light will ash green every 2 seconds to indicate it is ready to be remote started.
NOTE: Manual transmission starting is canceled if you enter the vehicle after performing
the setup procedure.
Other Remote Start Features (cont’d)
This is recommended for vehicles equipped with a turbocharger. It allows the engine to idle af-
ter driving to cool the turbo� When this Installer Programmable Feature (#4) is enabled, the system
will automatically keep the engine running as follows:
• With the engine running, hold the brake pedal and engage the parking brake.
When the brake pedal is released, the system will keep the engine running for the programmed
time (1, 2, or 3 minutes), and then automatically turn it off�
• The system may be locked while the engine is running. Turbo Timer can be prevented from
engaging, or “bypassed” if desired, by turning the engine off before engaging the parking brake�
Passive Arming/Locking Features
LAST DOOR ARMING
This system can be congured to arm the starter interrupt (optional) and/or lock automati-
cally when all the vehicle’s doors are closed (see user feature #2)� When this feature is utilized,
the horn will chirp once when all of the doors are closed� At that point, it will start a 30 second
countdown (indicated by a fast ashing status light). After 30 seconds, the system will arm and/or
lock the doors� During the 30 second delay, if a point of entry is opened, the countdown will pause
until all entry points are closed again� Turning ON the ignition key will cancel the last door locking
sequence until the key is turned off and the doors are all closed once again.
AUTOMATIC REARMING
This automatically rearm the starter interrupt (optional) and/or lock the doors if the system is
unlocked from the remote� (see user feature #3)� When unlocked by remote, the system will start
a 90 second countdown (fast ashing status light) to lock the doors. This is useful if the control-
ler accidentally unlocks the system when it’s kept in a purse or pocket where other items could
potentially press the buttons� ENHANCED AUTO REARM allows you to cancel the countdown by
pressing UNLOCK a second time within 5 seconds of the rst press.

8
EMERGENCY OVERRIDE
If your controller becomes inoperable, you’d need to perform an emergency over-
ride to disarm the starter interrupt� To do so, use the following steps:
STEP 1 - Enter the vehicle
STEP 2 - Turn the ignition key to the “ON” position
STEP 3 - Press the valet switch (located in the window-mount antenna) once
NOTE: Enter your SecureCode at this time if programmed via user feature #1
STEP 4 - Turn the ignition “OFF”�
VALET MODES
VALET MODE, while active, completely disables all security functions� Keyless en-
try & remote start are still operable� To enter valet mode, perform the following steps:
STEP 1 - Unlock the system either with the controller or by performing an emergency
override (make sure NOT to hold the brake pedal)�
STEP 2 - Press and hold the valet switch for 2 seconds� The system will chirp once
and the RED status light will turn on�
REMOTE START VALET MODE, disables remote start only� Keyless entry and
passive lock functions still operate� To enter remote start valet mode, perform the
following steps:
STEP 1 - Unlock the system (by remote or by emergency override)
STEP 2 - Hold the brake pedal then press and hold the valet switch for 2 seconds�
The system will chirp once and the GREEN status light will turn on�
FULL VALET MODE combines both normal & remote start valet modes� To acti-
vated full valet mode, follow these steps:
STEP 1 - Enter remote start valet� You will hear a chirp�
STEP 2 - Release the brake pedal but continue holding the valet switch� After 2 sec-
onds, you will hear a second chirp�
STEP 3 - Immediately release the valet switch� The status light will alternate between
RED and GREEN every second�
EXITING VALET MODES - Press and release the valet switch once� The status
light will turn off� This procedure is the same for all forms of valet mode�
SECURECODE
SecureCode allows you to customize the number of valet presses required to
perform an emergency override. SecureCode has 2 stages with the rst requiring 1-9
button valet presses and the second requiring 0-9 valet button presses. This gives
you 99 possible combinations� To program a custom SecureCode, please refer to
user feature #1�
To perform an emergency override with SecureCode, use the following steps:
STEP 1 - Enter the vehicle�
STEP 2 - Turn the ignition switch to the “ON” position�
STEP 3 - Within 5 seconds of step 2, press the valet switch to enter the rst digit of
your programmed code�
STEP 4 - After a few seconds, the horn will chirp once (conrming stage 1).
STEP 5 - Now, within 5 seconds of step 4, press the valet switch to enter the second
digit of your code� If the code is correct, the starter interrupt will disarm�
If the code is entered incorrectly, turn the ignition key OFF, then back ON to try
again� If 2 failed attempts are made, no further attempts can be made for 2 minutes�
Using The Valet Switch

9
The Status Light
The status lights, located in the antenna, provide a visual indication of the system’s
status via GREEN (remote start status) and RED (system status) lights�
SYSTEM STATUS (RED LIGHT):
ON CONSTANT: The system is in valet mode�
FLASHING FAST: One of the automatic locking features is in progress�
AUTOMATIC TRANSMITTER VERIFICATION (RED LIGHT):
Every time you turn on the ignition key, the status light will ash a number of times
equal to the number of transmitters programmed to the system. This unique security
feature protects you from a potential thief (valet attendant, mechanic, installer, etc�)
from adding their own transmitter without your knowledge and accessing your vehicle
and it’s contents at a later time (the perfect crime!)�
REMOTE START STATUS (GREEN LIGHT):
OFF: The remote start is off and in standby mode�
ON CONSTANT: The remote start is in valet mode�
FLASHING SLOW: The engine was started successfully and is running�
FLASHING FAST: The remote start sequence has begun and is in process of starting
the vehicle’s engine�
1 FLASH EVERY 2 SECONDS: System is ready to remote start in manual transmis-
sion mode�
REMOTE START DIAGNOSTICS (GREEN LIGHT):
The remote start system can also indicate which zone caused the last remote start
cycle was ended� To see this indicator, place the system into valet mode� Immediately
after the chirp, the GREEN status light will ash to indicate what caused remote start
to end�
1 FLASH: Run time expired�
2 FLASHES: Brake pedal was pressed�
3 FLASHES: Engine stalled or a bad tach signal�
4 FLASHES: Received transmitter command to stop�
5 FLASHES: Gear selector was moved from park(or the parking brake was released)�
6 FLASHES: Low battery voltage�
COMBINATION INDICATIONS:
This indication reect combinations of functions involving the keyless entry system
AND remote start�
SLOWLY ALTERNATES GREEN/RED: System is in full valet mode�
SOLID RED W/ GREEN FLASH: System is in valet w/ remote start activated�

10
Anti-Carjacking Protection
The system is equipped with two separate Anti-Carjacking protection features (igni-
tion, open door, or both)� All are programmable, and must be turned on to operate�
Once activated, the user has 53 seconds to cancel the Anti-Carjacking protection
process (described below)� If Anti-Carjacking is not cancelled, 53 seconds after being
activated the siren will begin to chirp for 7 seconds to alert the user that the system
is about to enter into an alarm condition� The Valet Switch may still be pressed once
during this period to cancel the Anti-Carjacking process�
If the Anti-Carjacking process is not cancelled before the 60 second countdown
expires, the system will enter an alarm condition, sounding the siren and ashing the
parking lights� 30 seconds after this occurs, or should the ignition be turned off in the
meantime, the stater interrupt will engage� Once the system enters the alarm condi-
tion, it will not respond to the transmitter, nor will the system reset automatically after
60 seconds, and it can only be disengaged by:
Step 1 Turning the vehicle’s ignition off�
Step 2 Turning the ignition back on�
Step 3 Within 5 seconds, perform an Emergency Override using the Valet Switch� If
the SecureCode has been customized, the correct number of Valet Switch presses
must be made�
The different types of Anti-Carjacking protection are:
Ignition Activated Anti-Carjacking activates every time the vehicle’s ignition is
turned on� The Valet Switch must be pressed within 60 seconds of activating to can-
cel Anti-Carjacking� This is User Programmable Feature #15�
Door Anti-Carjacking activates when a door is opened after the vehicle is started
and the engine is running� The Valet Switch must be pressed within 60 seconds after
activation to cancel Anti-Carjacking� This is User Programmable Feature #15�

11
If the Unauthorized Transmitter Alert feature is on, programming a transmitter to the
system will activate the “UTA” warning and the extended Status Light indication� For
the next 48 hours, the siren/horn will sound a brief series of chirps every time the
vehicle’s ignition key is turned on�
Special Programming procedure to turn on the UTA feature: Using this method
to program transmitters or optional controllers, and to turn on the Unauthorized Trans-
mitter Alert feature�
Follow the same steps as the Standard Programming, but on any transmitter/con-
troller being programmed instead of pressing the “lock” button, press the “lock” and
the “unlock” buttons together� This action turns on the Unauthorized Transmitter
Alert feature and at the same time programs the transmitter or controller to operate
the system�
Once the Unauthorized Transmitter Alert feature is turned on, the warning will
sound for 48 hours after any transmitter programming� This feature can only be
turned off again by sending the system back to Omega for a reset�
Standard Programming: This method to program additional or replacement trans-
mitters does not affect the Unauthorized Transmitter Alert (UTA) feature� Before you
begin, have all transmitters which are to operate the system at hand�
Step 1 Then, turn the ignition “on”�
Step 2 Within 5 seconds of Step 1, press the Valet Switch 5 times� The siren/horn will
briey sound, conrming that the system is ready to learn a transmitter code.
Step 3 Press the “lock” button on each transmitter one at a time� The system will
chirp the siren/horn once to conrm that each was learned. If a code is not received
within 10 seconds of Step 2, the learning process will automatically exit�
Programming Transmitters

12
User Programmable Features
To custom program a new SecureCode:
Step 1 Follow Steps 1 to 4 in the previous “Programming Features” section to access
“feature #1”�
Step 2 Within 10 seconds slowly press and release the transmitter’s “lock” button
the number of times equal to the desired SecureCode for stage 1, allow the system to
respond to each transmitter button press with a siren chirp before pressing the button
again. A few seconds after the nal button press, the system will chirp the horn/siren
conrming the total number for stage 1.
Step 3 Congure stage 2 of the SecureCode by pressing and releasing the “unlock”
button the number of times desired for the stage 2� The system will
conrm as it did for stage 1.
Feature #1 - SecureCode
DEFAULT - 1 Press
SecureCode is a unique patented feature which allows you to custom select the
number of Valet Switch presses in two stages, instead of a single “1 press”, which
would be required in order to perform an Emergency Override. If any of the three anti-
carjacking features are utilized, a customized SecureCode would also be required to
turn it off once it is fully activated� The SecureCode operation is described on page 8�
Step 1 Turn the ignition key “ON”, then “OFF”
Step 2 Within 5 seconds of step 1, press the valet switch 5 times to access user
features (10 times to access installer features)�
~ The siren/horn will sound and the status light will turn on�
Step 3 Within 10 seconds of step 2, press the valet switch the number of times cor-
responding with the desired feature’s number�
~ The siren/horn will chirp, the status lights, and the parking lights will ash equal
to the selected feature�
Step 4 Change the feature by pressing the transmitter button that corresponds with
the desired setting� The siren/horn will chirp to correspond with the chosen setting�
Programming Features
Feature #2 - Last Door Arming
Off (press “lock” button to program) - DEFAULT
On w/o Doors Locking (press “unlock” button to program)
On w/ Doors Locking (press “trunk” button to program)
“Last Door Arming” has the system automatically arm the starter interrupt every time
you exit the vehicle (the complete operation is described on page 7)� This feature
turns that operation on or off, and with options of having Last Door Arming operate
with or without also locking the doors when the starter interrupt does arm�

13
Feature #5 - Ignition Activated Override
Off (press “unlock” button to program) - DEFAULT
On (press “lock” button to program)
This feature allows an emergency override to be performed by simply turning the
ignition switch on within 10 seconds of the system’s activation� After 10 seconds, a
standard Emergency Override must be performed�
User Programmable Features (cont’d)
Feature #4 - Starter Interrupt Functions
When Locked (press “lock” button to program) - DEFAULT
Anti-Grind Only (press “unlock” button to program)
Lock & Anti-Grind (press “trunk” button to program)
Automatic (press “start” button to program)
When Locked - The Starter Interrupt is enabled when you lock the doors by remote�
Anti-Grind Only - The Starter Interrupt is operable whenever remote start is on�
Lock & Anti-Grind - This setting combines the 2 options above�
Automatic - This will cause the Starter Interrupt output to automatically engage 90
seconds after the ignition switch is turned “off”, and after unlocking the system with
the remote�
Feature #7 - Open Door Bypass of Ignition Locking
On (press “lock” button to program) - DEFAULT
Off (press “unlock” button to program)
This feature cancels the automatic locking or unlocking of the vehicle’s doors if one of
the doors is open when the ignition switch is turned on or off�
Feature #6 - Ignition Controlled Lock/Unlock
Off (press “lock” button to program) - DEFAULT
Lock w/ Ignition On (press “unlock” button to program)
Unlock w/ Ignition Off (press “trunk” button to program)
Lock And Unlock w/ Ignition (press “start” button to program)
This feature controls the lock/unlock operations when the ignition key is turned on/off,
Feature #8 - Conrmation Chirps
On (press “lock” button to program) - DEFAULT
Except Valet Mode (press “unlock” button to program)
On Demand (press “trunk” button to program)
Off (press “start” button to program)
This feature removes the system’s locking & unlocking conrmation chirps for par-
ticular functions� The “On Demand” setting allows you to lock and unlock the doors
without chirps� Similar to OEM keyless entry, pressing either function a 2nd
time, will produce conrmation chirps.
Feature #3 - Automatic Rearming
Off (press “lock” button to program) - DEFAULT
On w/o doors locking (press “unlock” button to program)
On w/ doors locking (press “trunk” button to program)
Enhanced auto rearm (press “start” button to program)
“Automatic Rearming”, described on page 7, rearms the starter interrupt if accidentally
unlocked/disarmed� Options are to have Automatic Rearming operate with or without
also locking the doors when the system does rearm� Enhanced auto rearm allows you
to cancel the rearming sequence by pressing unlock a 2nd time after disarming.

14
User Programmable Features (cont’d)
Feature #9 - Conrmation Chirp Volume
Medium High (press “trunk” button to program) - DEFAULT
Low (softest) (press “lock” button to program)
Medium Low (press “unlock” button to program)
High (loudest) (press “start” button to program)
This feature allows the choice of four different volume levels of the system’s conrma-
tion chirps, and when programming it, the buttons can be repeatedly and sequen-
tially pressed, thus making it easy to hear and choose the setting with the best chirp
volume�
Feature #11 - Flashing Light Conrmations
On w/ Unlock, Flash w/ RS (press “unlock” button to program) - DEFAULT
On w/ Unlock & Remote Start (press “lock” button to program)
On During Remote Start (press “trunk” button to program)
Flashing During Remote Start (press “start” button to program)
This feature affects the parking light conrmations for unlock & remote start functions.
With the above options, you can select any combination of:
- Flashes twice after unlock
- Flashes twice then stays on for 30 seconds after unlock
- Stays on during remote start mode
- Flashes slowly during remote start mode
Feature #12 - 2nd Channel (Trunk Release) Also Unlocks Doors
On (press “lock” button to program) - DEFAULT
Off (press “unlock” button to program)
This feature, turned on, congures the system to unlock when the 2nd channel is
used�
Feature #15 - Anti-Carjacking
Off (press “start” button to program) - DEFAULT
Ignition Only (press “lock” button to program)
Door Only (press “unlock” button to program)
Ignition + Door (press “trunk” button to program)
This selects between the 2 forms of anti-carjacking protection� Details on using anti-
carjacking protection are described on page 10�
Off (press “unlock” button to program)
On (press “lock” button to program) - DEFAULT
This feature converts the system from a strictly Keyless Entry/Remote Start System
to having the capability of a full security & alarm system - SEE NOTE BELOW�
WARNING: ENABLING ALARM FUNCTIONS REQUIRE INSTALLATION &
WIRING CHANGES TO ACCOMODATE THESE FEATURES. ONLY YOUR
INSTALLER SHOULD MAKE THESE CHANGES TO PREVENT IMPROPER
OPERATION. IF YOU UPGRADE TO FULL ALARM FUNCTIONS, YOU’LL NEED
TO DOWNLOAD THE AL-1650-EDPB OPERATION GUIDE FROM
WWW.CARALARM.COM
Feature #14 - Alarm Functions Bypass

15
User Programmable Features (cont’d)
Feature #17 - Remote Start Activation
Press “start” button 2 times (press “lock” button to program) - DEFAULT
Press “start” button 1 time (press “unlock” button to program)
Press Lock & Unlock (press “trunk” button to program)
This feature changes how the remote start feature is activated using the controller
or transmitter. It also changes the number of pulses required to activate remote start
from the on the WHITE/BLUE wire
“Start” button 2 times = 2 pulses on the WHITE/BLUE wire
“Start” button 1 time = 1 pulse on the WHITE/BLUE wire
Lock & Unlock = 1 pulse on the WHITE/BLUE wire
Feature #18 - Remote Start Run Time
10 Minutes (press “unlock” button to program) - DEFAULT
5 Minutes (press “lock” button to program)
15 Minutes (press “trunk” button to program)
20 Minutes (press “start” to program)
This feature sets the period of time that the engine will run when remote started� If the
engine is not stopped by controller/transmitter command or a safety circuit violation,
the engine will automatically stop upon the expiration of the selected time period�

16
Installer Programmable Features
Feature #2 - Light Relay Functions
Dome Light Output (press “lock” button to program) - DEFAULT
Door Lock (press “unlock” button to program)
Ignition Output (press “trunk” button to program)
Accessory Output (press “start” button to program)
The system has two built-in relays, which can be programmed to perform several different func-
tions� The primary function of this relay, is to operate the vehicle’s dome, or interior lighting as
part of the system’s operations� Optionally, if desired or needed, this relay can be programmed to
be a door lock relay, or as medium-capacity ignition or accessory outputs (10A max), if needed for
remote starting use�
Feature #5 - Manual Transmission Mode
Off (press “unlock” button to program) - DEFAULT
On (press “lock” button to program)
This feature changes the parameters of the system’s remote start operation to be suitable for
manual transmission-equipped vehicles via a “setup” procedure which must be followed upon exit-
ing the vehicle to ensure the transmission is in neutral�
Feature #4 - Turbo Timer
Off (press “lock” button to program) - DEFAULT
Run 1 Minute (press “unlock” button to program)
Run 2 Minutes (press “trunk” button to program)
Run 3 Minutes (press “start” button to program)
This feature, the operation of which is described on page 9, when turned on
congures the system to automatically keep the engine running briey after it is turned off. This
operation is designed specically for vehicles having turbocharged engines (the user may tempo-
rarily bypass the feature if desired)� This feature should only be programmed by the installer,
and the operation of this feature depends on the correct connection of the safety wire to the
vehicle’s parking brake�
Feature #3 - Horn Relay Functions
Horn Output (press “lock” button to program) - DEFAULT
Door Unlock (press “unlock” button to program)
Trunk Release (press “trunk” button to program)
Pulse After Start (press “start” button to program)
The primary function of this second relay, is to operate the vehicle’s existing horn; either in
conjunction with the electronic siren, or in place of the siren� Using both the siren and the horn
creates an extremely effective security system� Optionally, if desired or needed, this relay can be
programmed as a door unlock, trunk release, or pulse after start relay�
This group of Installer Programmable Features are all accessed as a group in the second level of
features’ programming� These features have a direct affect upon the system’s operations related
to the installation and vehicle type AND SHOULD ONLY BE CHANGED BY THE INSTALLER!!!
Feature #1 - Doorlocking Functions
0.8 Second Outputs (press “lock” button to program) - DEFAULT
3 Second Outputs (press “unlock” button to program)
Double Pulse Unlock Output (press “trunk” button to program)
Total Closure Lock Output (press “start” button to program)
This single feature gives the installer several needed options, to match the system’s doorlocking
outputs to suite different vehicle requirements. The total closure setting provides a 28 second lock
pulse and a 0�8 second unlock pulse�

17
Installer Programmable Features (cont’d)
Feature #6 - Engine Detection Method
Tachless Hi (press “lock” button to program) - DEFAULT
Tachless Lo (press “unlock” button to program)
Tach Wire (press “trunk” button to program)
Data Tach (press “start” button to program)
Crank Only (press “lock” & “unlock” to program)
This feature selects the method in which the remote start monitors the engine’s running condition
in remote start mode�
“Tachless Hi” sensitivity mode uses a preset crank time (see installer feature #7) and monitors
the vehicle’s voltage level to determine if the engine is running� This setting looks for a voltage
increase of 0�3v after cranking�
“Tachless Lo” sensitivity mode operates like the “Tachless Hi” setting but looks for a voltage
increase of 0�5v after cranking�
“Tach Wire” Before this setting is programmed, refer to the “Violet/White wire” section of the
installation manual for proper wiring connection and the Tach Learn Procedure� It will crank the
engine for up to 3 seconds or until a tach signal is detected�
“Data Tach” mode operates just like the “Tach Wire” setting except it takes its reading from the
D2D data port instead of using the Violet/White wire� Before using, make sure this function is sup-
ported by the Databus Interface module�
“Crank Only” AKA “blind start” is similar to the “Tachless” settings however, it only makes one
start attempt and does not monitor engine running conditions� This is useful for many “push-to-
start” vehicles�
Feature #8 - PINK/WHITE (IGN #2)Wire Function
Ignition (press “lock” button to program) - DEFAULT
Accessory(press “unlock” button to program)
Starter (press “trunk” button to program)
This feature changes the operation of the unit’s large PINK/WHITE output wire� This feature
should only be programmed by the installer�
Feature #7 - Starter Cranking Time
0.75 Second (press “lock” button to program) - DEFAULT
1.00 Second (press “unlock” button to program)
1.5 Seconds (press “trunk” button to program)
2.25 Seconds (press “start” button to program)
This feature determines the crank time of the 1st start attempt when in “Tachless” mode� If the
engine doesn’t start on the rst attempt, it will retry up to 3 more times extending the crank time by
an additional 0�2 second with each attempt��
Feature #9 - OEM Arm/Disarm Outputs or Additional Channels
OEM Arm / OEM Disarm (press “lock” button to program) - DEFAULT
OEM Arm / Channel 5 (press “unlock” button to program)
Channel 4 / OEM Disarm (press “trunk” button to program)
Channel 4 / Channel 5 (press “start” button to program)
The system has outputs designed for arming and/or disarming a factory-equipped security system.
These wires may be used instead to provide further system outputs, which are remotely operated
by the controller or transmitter� These outputs are in addition to the 2nd channel and 3rd channel
outputs� As shown in the programming assignment, the arm, disarm, channel 4 and channel 5 are
programmable as various combinations� For example, if the disarm output is needed, but not the
arm output, then channel 4 may be made available for use�

18
Installer Programmable Features (cont’d)
Feature #11 Remote Start Lock Control
Off (press “lock” button to program) - DEFAULT
Lock After Start (press “unlock” button to program)
Unlock before start (press “trunk” button to program)
Unlock Before+Lock After Start (press “start” button to program)
This feature allows for OEM alarm/lock control in relation to remote start operations thus eliminat-
ing extra wiring�
Feature #12 Low Temp Crank Extender
0ms (Off) (press “lock” button to program)
200ms (press “unlock” button to program) - DEFAULT
300ms (press “trunk” button to program)
400ms (press “start” button to program)
When the vehicle’s interior temperature is below freezing, this feature adds extra crank time to the
base timing (see installer feature #7)� It applies to tachless modes only (installer feature #6)
Feature #13 Data Port Protocol
ADS (iData) (press “unlock” button to program)
D2D (Trilogix) (press “lock” button to program) - DEFAULT
This feature determines which data protocol is used on both data ports� Choose this based on
the accessory being connected to the port� NOTE: When a BLADE is inserted, this feature
automatically switches to the ADS protocol.
Feature #15 Blue Satellite Port, Blue Wire Function
Status (press “lock” button to program) - DEFAULT
Pulse Before Start (press “unlock” button to program)
Defrost Pulse (press “trunk” button to program)
Pulse After Engine Off (press “start” button to program)
This determines the function of the Blue wire on the Blue satellite relay port�
The Status setting turns on briey before the Ignition output and stays on during remote start
mode� The other settings give a 0�8 second pulse under the selected condition� Defrost Pulse will
send a pulse after start only when the cabin temperature is below freezing (32 degrees F)
Feature #10 Gasoline Or Diesel Engine
Gasoline (press “lock” button to program) - DEFAULT
Diesel 15 Sec. Delay (press “unlock” button to program)
Diesel 20 Sec. Delay (press “trunk” button to program)
Diesel 30 Sec. Delay (press “start” button to program)
This feature changes the system’s timing of the ignition and starter output sequence for gas or
diesel engines� Gasoline: the starter output will occur 3 seconds after the ignitions turn on� When
in “Tachless” mode, the engine running status is determined 10 seconds after starting� Diesel:
the starter output will occur 15, 20, or 30 seconds after the ignitions turn on (allows for glow plug
warming)� When in “Tachless” mode, the engine running status will be determined 40 seconds
after cranking�

19
Programmable Features Matrix
User Feature Programming: Ignition on, off, press valet 5 times
# Feature Lock Button Unlock button Trunk button ”START” button
1 Secure Code 1, 0 (default)
2 Last Door Arming Off On w/o lock On w/ Lock
3 Automatic Rearming Off On w/o lock On w/ Lock Enhanced Rearm
4 Starter Interrupt Functions W/ Lock Anti-Grind Only Lock+Anti-Grind Automatic
5 Ignition Override On Off
6 Ignition Lock/Unlock Off Lock w/ IGN ON Unlock w/ IGN Off Lock + Unlock w/
IGN On/Off
7 Open Door Bypass For Ign. Locks On Off
8 Conrmation Chirps On Except Valet
mode On Demand Off
9 Chirp Volume Low Med Low Med Loud Loud
10 N/A
11 Flashing Lights Conrmation On w/ Unlock +
RS Steady
On w/ Unlock +
RS Flashing Steady During RS Flashing During RS
12 Unlock Upon Trunk Release On Off
13 N/A
14 Alarm Functions Bypass On Off
15 Anti-carjack Ignition Only Door Only Ignition + Door Off
16 N/A
17 Remote Start Activation Start / Pulse x 2 Start / Pulse x 1 Lock+Unlock
18 Remote Start Run Time 5 min 10 min 15 min 20 min
Installer Feature Programming: Ignition on, off, press valet 10 times
1 Doorlock pulse 0.8 sec 3 sec Double unlock Total closure
2 Light Relay Functions Dome light Lock Ignition Acc
3 Horn Relay Functions Horn Unlock Trunk Release Pulse after Start
4 Turbo Timer Off 1 min 2 min 3 min
5 Manual Transmission On Off
6 Engine detection Tachless Hi Tachless Lo Tach Wire Datatach
Crank Only (press Lock + Unlock)
7 Crank Time 0.7 sec 1 sec 1.5 sec 2.25 sec
8 Pink/White Ignition Wire Function Ignition Accessory Start
9 OEM Arm/Disarm/Additional Ch. Arm/Disarm Arm/Ch 5 Ch4/Disarm Ch 4/Ch 5
10 Gas or Diesel Engine Gas Diesel
(15 sec. Delay)
Diesel
(20 sec. Delay)
Diesel
(30 sec. delay)
11 Remote Start Lock control Off Lock after start Unlock before start Both
12 Low Temp Crank Extender 0ms 200ms 300ms 400ms
13 Data Port Protocol D2D (Trilogix) ADS (iData)
14 N/A
15 Blue Satellite Port Blue Wire Function Status Pulse Before
Start
Pulse After Start
Below Freezing
Pulse After
Engine Off

Back Cover
Color cover is in a
separate le.