Excito BUBBA User manual

Document revision: 1.04 www.excito.com
BUBBA|STORAGE
QUICK START GUIDE

2 www.excito.com
INSTALLATION GUIDE

Check package contents
Bubba|Storage
4 rubber feet
Wall power adapter
Mains power cable, fitting your country’s standard
eSATA cable

Attach the rubber feet
Decide if you want to use Bubba|Storage standing upright or lying down.
Attach the feet accordingly.
or

Connect your BUBBA|STORAGE
Connect the eSATA cable between the Bubba|Storage and your
Bubba|Two.
Connect the 12V power adapter first to a mains supply, and then to
Bubba|Storage.
Log in as administrator on your Bubba|Two; click ‘Disk’ and click
‘Connect’ next to the new disk.

3 www.excito.com

Accessing your BUBBA|STORAGE
Accessing Bubba|Storage via samba you will find your files under
bubba\storage\extern\[disk_name].
Accessing Bubba|Storage with a web browser using Bubba|Two
File manager you will find your files under
/home/storage/extern/[disk_name].

Disconnecting your BUBBA|STORAGE
Log in as admin on your Bubba|Two; click ‘Disk’ and click ‘Disconnect’
next to the new disk. Now it is safe to remove the power from
Bubba|Storage.

Using BUBBA|STORAGE for RAID, LVM or backup
Read your Bubba|Two manual to configure a RAID setup, an LVM
extension or a backup job towards your Bubba|Storage.
The complete user’s manual is available for download at
www.excito.com, click ‘Support’.
Note: To prevent loss of data or malfunction, always
disconnect Bubba|Storage properly before unplugging it.

4 www.excito.com
For a richer BUBBA|STORAGE experience - visit
www.excito.com
forum.excito.net