EXP PRO EXP48PRO User manual

EXP PRO Batteries
Handheld Power
EXP48PRO & EXP96PRO
User Manual
Power to Explore
www.EXPPROPOWER.com
Spanish & French translations available on our website

Table of Contents
General Battery Information
1. Introduction
2. Description
3. Contents
4. Charging Your Battery
5. Other Information About Charging Your Battery
6. Charging Your Battery with a Solar Panel
7. Capacity/Specifications
8. Powering From the DC Output Port
9. Pass-Through Technology
10. Parallel Connection of Batteries (Parallel Connection)
11. Operating the White Light/Emergency Amber Flashing Light
12. Battery Management System (BMS)
13. Airline Travel
14. Battery Storage
15. Safe Use of Lithium Batteries
16. FAQs
CPAP User Information
17. Powering Your PAP Machine from the DC Output Port
(Recommended)
18. PAP Machine DC Power Cords
19. Powering Your PAP Machine from the AC Output Port (Using a Pure
Sine Inverter)
20. PAP Machine Runtimes
21. Notes
Warranty Information
22. Limited Warranty
23. Register Your EXP PRO Product

General Battery Information
1. Introduction
Thank you for purchasing an EXP PRO Battery. This instruction
manual contains important information about usage and safety. Use
the product as described and keep this manual for future reference.
Before reading through the manual, you can begin to charge your
EXP PRO Battery by connecting it to the AC power supply cord
provided and plugging into a wall socket. See Section 4 - Charging Your
Battery.
2. Description
*Please note the EXP96PRO Battery has 2 DC Output Ports

3. Contents
●EXP48PRO or EXP96PRO Battery
●Protective Sleeve for Battery
●AC Charger: Input 110V-240V / Output 15V@2A (2000mA)
●DC Charger: Input 12V-24V / Output 15V@2A (2000mA)
●User Manual
4. Charging Your Battery
A. Select the method of charging. AC (plugs into the wall)
and DC (plugs into the car) cords are both included.
B. Plug the charging cable into the charging input port
located on the battery and the other end into the
appropriate power source.
C. Charging will begin automatically.
D. Battery is fully charged when all power indicator lights
have been solidly lit for at least 30 minutes.
E. Indicator Lights:
1 light lit = 0-25% battery charge
2 lights lit = 25-50% battery charge
3 lights lit = 50-75% battery charge
4 lights lit = 75-100% battery charge
5. Other Information About Charging Your Battery
●Never leave the battery unattended for long periods of time
while charging.
●Do not charge below 32°F. Optimum ambient charge
temperature is 40°F - 110°F.
●Do not charge the battery if the charge cord or battery has
obvious damage or if the battery appears to be bulging. A
bulging battery is a potential sign of damaged lithium cells.
●Do not charge the battery if it feels excessively hot. The
battery should not reach more than 120°F while charging or
discharging and should not feel hotter than a warm cup of
coffee to the touch.

6. Charging Your Battery with a Solar Panel
7. Capacity/Specifications
Full capacity and specification information can also be found on the
back of each battery.
●DC Output Port: DC12V@10A Continuous / 15A Peak (5Min)
●Type C Input: DC5V@3A / 9V@3A / 15V@3A / 20V@2.25A
●Type C Output: DC5V@3A / 9V@3A / 12V@3A / 15V@3A / 20.3V@3A
●USB Output 1: DC5V@2.4A
●USB Output 2: DC3.6V-6.5V@3A / 6.5V-9V@2A / 9-12V@1.5A
EXP PRO offers a high efficiency monocrystalline panel that is
designed to be a genuinely portable charging solution for the
EXP48PRO and EXP96PRO Battery line. It is soft and foldable,
allowing easy portability for your adventures. See
www.EXPPROPOWER.com
If you choose to use your own solar panel EXP PRO offers a cord
that will connect most other solar panels to the battery.
EV-SOLAR-C
This solar panel adapter charge cord allows you to charge the EXP
PRO batteries using an 18-22V 40W non-regulated solar panel.
Uses a popular SAE style connector on the solar end.

EXP48PRO: 153.6-Watt Hours (Wh) / 12.8 Amp Hours (Ah) @
12V / 48,000 Milli Amp Hours (mAh) @ 3.2V.
EXP96PRO: 307.2-Watt Hours (Wh) / 25.6 Amp Hours (Ah)
@ 12V / 96,000 Milli Amp Hours (mAh) @ 3.2V.
8. Powering From the DC Output Port
A. Plug your device into the main round power port ensuring
a secure fit, using a 12V cigarette style plug that is meant
to power your device.
B. The port(s) will automatically turn on and provide power
to the connected device.
C. To turn off the device, simply unplug it from the power
port.

9. Pass-Through Technology
The EXP48PRO and EXP96PRO are equipped with “Pass Through”
technology. This allows you to charge devices connected to the
battery while the battery is being charged. The battery will
automatically detect a power outage and switch to battery power.
Please note to get the most life out of your EXP PRO battery, we
suggest only using this option if there is concern about a potential
power outage.
10. Parallel Connection of Batteries (Daisy Chaining)
You can parallel connect no more than two batteries by plugging in
the provided DC charge cord to the charge port on one battery and
the main power port marked 12V/15A on the other battery in order
to double the available capacity.
11. Operating the White Light/Emergency Amber
Flashing Light
White Light: Press and hold the power button to turn on. Press and
hold the power button, again, to turn off.
Emergency Amber Flashing: Quickly press the power button twice
to turn on. Quickly press the power button twice, again, to turn off.
12. Battery Management System (BMS)
The EXP PRO battery line has a built-in BMS that controls balanced
charging and discharging of the individual Lithium cells contained
within. It also provides protection from:
●Over-Charging •Over-Discharging
●Over-Current •Over-Temperature
●Short Circuit
If the BMS has been tripped to protect the lithium cells and has shut
down the battery simply plug in the AC charge cord as if charging and
the BMS will reset itself and resume normal operation.

13. Airline Travel
EXP48PRO:
Up to two of the EXP48PRO batteries can be brought with you in
your carry-on luggage. While the FAA regulations state the limit is
160 watts, and the EXP48PRO only contains 153.6 watts per
battery, ultimately the final decision rests with the TSA officer on
whether an item is allowed through the checkpoint.
EXP96PRO:
The EXP96PRO contains 307.2 watts per battery and does not
meet FAA regulations for airline travel.
Please check current FAA regulations and the individual airline rules
prior to airline travel. Do not put EXP PRO batteries or any other
lithium batteries or devices containing lithium batteries in checked
baggage of any type. If allowed by FAA regulations and individual
airline rules only take in carry-on baggage. Current FAA regulations
can be found on their website at www.faa.gov search “Pack Safe
Lithium Batteries”. The major airlines list rules for lithium batteries
on their websites.
14. Battery Storage
Your battery is initially packed and shipped at roughly 10-30%
charge. It is best practice to fully charge your battery before the first
use. For storage greater than 3 months, the general rule is to store at
40-50% of capacity, or having only 2 indicator lights lit. We have
provided a “Notes” section for you to keep track of your battery
maintenance.

15. Safe Use of Lithium Batteries
●Never expose the battery to liquids, especially saltwater. This
can cause internal corrosion and damage to the lithium cells
and/or the BMS, causing them to malfunction.
●Although the battery consists of a shock absorbing case,
handle with as much care as possible to avoid dropping the
battery. This can damage the lithium cells, or more likely the
BMS, causing them to malfunction.
●Never operate the battery in direct sunlight. This is hard on
the BMS electrical components and the lithium cells.
Prolonged use in direct sunlight can damage the battery.
16. FAQs
How long will it take to charge my battery?
EXP48PRO: Approximately 6.5 hours ± @ 2A.
EXP96PRO: Approximately 13.0 Hours ± @ 2A.
Can I use an inverter?
An inverter can be used with EXP PRO Battery Line. Please note
that using an inverter will draw additional power from the battery
to convert DC to AC power. Visit www.EXPPROPOWER.com for
more information.
How many life cycles (discharge and recharge) should I expect
from my EXP PRO battery?
Up to 5000.
What are some common devices I can charge with my EXP PRO
battery?
Cell Phones, Go Pros, Laptops, Tablets, Bluetooth Speakers,
Drones, LED Lights, CPAP machines, BiPAP machines, Cameras, Air
Pods and more.

Can I use a different charge cord other than the two supplied with
my battery?
Use of a different charge cord may damage the battery and is not
recommended. Replacement cords may be available to purchase
through your battery retailer, or you can find them on
www.EXPPROPOWER.com.
Can I run 2 PAP devices off of the EXP96PRO battery?
Yes. There are 2 DC output ports available on the EXP96PRO
battery. A PAP device may be plugged into each of these ports and
run at the same time.
CPAP User Information
17. Powering Your PAP Machine From The DC Output
Port (Recommended) See website for ordering or more information
A. Obtain the DC power cord for your PAP machine. This cord
is a 12V cigarette style plug that is meant to power your
specific PAP machine and is sold separately from this
battery.
B. Using the DC power cord specific to the individual PAP
machine being powered, plug your device into the DC
Output Port on the battery ensuring a secure fit.
C. The port(s) will automatically turn on and provide power to
the connected device.
D. To turn off the device, simply unplug it from the power port.
E. To get the most run time from the battery we recommend
turning off all auxiliary features such as heated hose and
humidifier.

CPAP User Information
1 8. PAP Machine DC Power Cords
RM-11
Fits Models: Resmed Airsense 11 CPAP,
Airsense 11 Elite CPAP, Airsense 11
Autoset CPAP.
RM-10
Fits Models: Resmed Airsense 10 CPAP,
Airsense Elite CPAP, Airsense 10 Autoset
CPAP, Airstart 10 CPAP, Airstart 10 Auto
CPAP, Aircurve 10 S Bilevel, Aircurve 10
Vauto Bilevel.
RM-9
Fits Models: Resmed S9 Escape CPAP
with ERP, S9 Elite CPAP with ERP, S9
Autoset CPAP, S9 VPAP S Bilevel.
DS-12V:
Fits Models: Philips Respironics
Dreamstation CPAP, Dreamstation Pro,
Dreamstation Auto, Dreamstation BiPAP
& Auto.

S1-60:
Fits Models: Philips Respironics
Remstar 60 Series, Auto CPAP, Pro
CPAP, Plus CPAP/C-Flex, SE CPAP,
BiPAP Pro/Bi-Flex, BiPAP Auto/Bi-Flex
BiPAP AutoSV Advanced.
EV-VP-DC:
Fits Models: Z1 CPAP, Z1 Auto, Z2
CPAP, Z2 Auto (included with EXP PRO
Battery)
DCPOW:
Fits Models: Resvent iBreeze CPAP,
APAP, BPAP
AIRMINI DC:
Fits Model: Resmed Airmini CPAP.

To get the most run time from the battery we recommend turning off
all auxiliary features such as humidifier and heated hose if possible.
These features use a large amount of amperage and will draw most of
the available power from the battery.
PAP machine nightly run times for the EXP48PRO and EXP96PRO
are figured using the average night sleep in the US of 7 hours and
with auxiliary features turned off. Power requirements will vary
greatly from one PAP machine to the next and with different
prescribed pressure settings. We recommend you test your PAP
machine with the battery prior to depending on it for emergency or
off-grid power use. Mask fit is also important. Air leakage will result
in higher power consumption and reduced run times.
19. Powering Your PAP Machine Using An Inverter
(not included)
A. Plug the AC power cord included with the PAP machine
into the AC outlet on a pure sine wave inverter.
B. Plug the inverter into the DC output port found on the
battery. The inverter will convert DC power from the
battery to AC power required for the factory AC power
cord.
C. Please note that using an inverter will draw more of your
battery power than just using a DC power cord.
D. To ensure the integrity of your PAP machine, please check
with your PAP machine manufacturer regarding the type
of inverter to use. Most manufacturers recommend a pure
sine wave inverter as opposed to a modified sine wave
inverter. EXP PRO offers a Pure Sine Wave Inverter.
Please see our website www.EXPPROPOWER.com
20. PAP Machine Runtimes
EXP48PRO: 2-3 Nights EXP96PRO: 4-6 Nights

Warranty Information
22. Limited Warranty
EXP PRO warrants to the original consumer purchaser that the
EXP PRO product will be free from defects in workmanship and
materials under normal consumer use during the applicable
warranty period identified in the “Warranty Period” section below,
subject to the exclusions set forth below. This warranty statement
sets forth EXP PRO’s total and exclusive warranty obligation. We
will not assume, nor authorize any person to assume for us, any
other liability in connection with the sale of our products.
Warranty Period: The warranty period is 2 years. In each case, the
warranty period is measured starting on the date of purchase by
the original consumer purchaser. The sales receipt from the
original purchase, or other reasonable documentary proof, is
required in order to establish the start date of the warranty period.
21. Notes

Exclusions: EXP PRO’s warranty does not apply to (i) any product
that is misused, abused, modified, damaged by accident, or used
for anything other than normal consumer use as authorized in
EXP PRO’s current product literature, or (ii) any product
purchased through an online auction house. EXP PRO’s warranty
does not apply unless the battery cell is stored at the proper
charge level as laid out in section 14.
How to Receive Service:
To obtain warranty service, contact our customer service team at
[email protected]
23.Register Your EXP PRO Product
You will need:
Product Name
Date of Purchase (must match date on purchase receipt)
Email Address
Serial Number
Go to https://exppropower.com/pages/product-registration
Remedy: EXP PRO will repair or replace (at EXP PRO’s option)
any EXP PRO product that fails to operate during the applicable
warranty period due to defect in workmanship or materials. If a
valid claim is made during the applicable period, EXP PRO, at its
options, will either (1) repair the product, or (2) replace the
product with a product of equal value. Whether a product is
repaired or replaced, it assumes the remaining warranty of the
original product or ninety (90) days from the date of repair or
replacement, whichever is greater.
Limited to Original Consumer Purchaser:
The warranty on EXP PRO’s product is limited to the original
consumer purchaser and not to any subsequent owner.

Español

Tabla de contenido
Información general de la batería
1. Introducción
2. Descripción
3. Contenido
4. Carga de la batería
5. Otra información sobre la carga de la batería
6. Cargar su batería con un panel solar
7. Capacidad / Especificaciones
8. Alimentación desde el puerto de salida de DC
9. Tecnología de transferencia
10. Conexión en paralelo de baterías
11. Funcionamiento de la luz blanca / luz intermitente ámbar de emergencia
12. Sistema de gestión de baterías (BMS)
13. Viajes en avión
14. Almacenamiento de baterías
15. Uso seguro de baterías de litio
16. Preguntas frecuentes
Información del usuario de CPAP
17. Encendido de su máquina PAP desde el puerto de salida de CC (Recomendado)
18. Cables de alimentación de CC de la máquina PAP
19. Encendido de su máquina PAP desde el puerto de salida de CA (utilizando un
Inversor de seno puro)
20. Tiempos de ejecución de la máquina PAP
21. Notas
Información de garantía
22. Garantía limitada
23. Registre su producto EXP PRO

Información general de la batería
1. Introducción
Gracias por comprar una batería EXP PRO. El manual contiene información
importante sobre el uso y la seguridad. Utilice el producto como se describe y
conserve este manual para futuras consultas. Antes de leer el manual, puede
comenzar a cargar su Batería EXP PRO conectándola al cable de alimentación de
CA proporcionado y enchufado a una toma de corriente. Véase la Sección 4 - Carga
de la Batería.
2. Descripción
* Tenga en cuenta que la batería EXP96PRO tiene 2 puertos de salida de CC
3. Contenido
● Batería EXP48PRO o EXP96PRO
● Funda protectora para batería
● Cargador de CA: entrada 110 V-240 V / salida 15 V a 2 A (2000 mA)
● Cargador DC: Entrada 12V-24V / Salida 15V @ 2A (2000mA)
● Manual de usuario

4. Carga de la batería
A. Seleccione el método de carga. AC (se conecta a la pared) y los cables de
CC (se conectan al automóvil) están incluidos.
B. Enchufe el cable de carga en el puerto de entrada de carga ubicado en la
batería y el otro extremo en la fuente de energía apropiada.
C. La carga comenzará automáticamente.
D. La batería está completamente cargada cuando se encienden todos los
indicadores de energía han estado sólidamente encendidas durante al
menos 30 minutos.
E. Direccionales:
1 luz encendida = 0-25% de carga de la batería
2 luces encendidas = 25-50% de carga de la batería
3 luces encendidas = 50-75% de carga de la batería
4 luces encendidas = 75-100% de carga de la batería
5. Otra información sobre la carga de la batería
● Nunca deje la batería olvidada durante largos períodos de tiempo mientras se
carga.
● No cargue por debajo de 32 ° F. Carga ambiental óptima la temperatura es de 40
°F a 110 ° F.
● No cargue la batería si el cable de carga o la batería tiene daño evidente o si la
batería parece estar abultada. UN La batería abultada es un signo potencial de que
las celdas de litio están dañadas.
● No cargue la batería si se siente excesivamente caliente. Aunque el rango de
temperatura de carga y descarga es de -4 ° F a 132 ° F, el BMS puede activarse para
protegerse si la batería alcanza más de 120 ° F mientras se carga o descarga.
6. Cargar su batería con un panel solar
EXP PRO ofrece un panel monocristalino que está diseñado para ser una solución
de carga verdaderamente portátil para la línea de baterías EXP48PRO y
EXP96PRO. Es suave y plegable, lo que permite un fácil transporte para sus
aventuras. Ver www.EXPPROPOWER.com
Si elige usar su propio panel solar, EXP PRO ofrece un cable
que conectará la mayoría de los otros paneles solares a la batería.
EV-SOLAR-C
Este cable de carga del adaptador del panel solar le permite cargar el EXP
Baterías PRO utilizando un panel solar no regulado de 18-22V 40W.
Utiliza un conector de estilo SAE popular en el extremo solar.

7. Capacidad / Especificaciones
La información completa de capacidad y especificaciones también se puede
encontrar en la parte posterior de cada batería.
● Puerto de salida DC: DC12V @ 10A continuo / 15A pico (5 min)
● Entrada tipo C: DC5V @ 3A / 9V @ 3A / 15V @ 3A / 20V@2.25A
● Salida tipo C: DC5V @ 3A / 9V @ 3A / 12V @ 3A / 15V @ 3A / 20.3V@3A
● Salida USB 1: DC 5V@2.4A
● Salida USB 2: DC3.6V-6.5V@3A / 6.5V-9V@2A / 9-12V@1.5A
EXP48PRO: 153,6 vatios hora (Wh) / 12,8 amperios hora (Ah)
@ 12V / 48,000 Milli Amp-hora (mAh) @ 3.2V.
EXP96PRO:307,2 vatios hora (Wh) / 25,6 amperios hora (Ah)
@ 12V / 96,000 Milli Amp-hora (mAh) @ 3.2V.