Exposure Lights HT 1000 User manual

CHARGING
Charge your light fully before rst use
1. Insert Exposure Lights charger cable.
2. The bi-colour battery indicator (see graphic) will ash green whilst charging.
3. When the battery is fully charged the LED will turn solid green.
4. Charge time 3.5 hours from a 1500mA power source (up to 6 hours from a 500mA source).
USER GUIDE
HT 1000
BI-COLOUR BATTERY
INDICATOR
EXPUG2
For more information please visit:
exposurelights.com
EXPUG11
WARRANTY & SERVICE
Please do not send any products back to us without contacting our service team rst to discuss your
issue and for a valid returns number.
All our lights come with a 2 year warranty.
If you have a servicing or technical question you can contact us using the information below. If you return
your light for repair, no work will be carried out until you have been contacted with the cost for the repair.
If you are outside of the UK it would be quicker in the rst instance to contact your local distributor.
[phone]
[email protected]
WARNING
Exposure Lights are very powerful lighting systems, please take care when operating. Do not look
directly into the light or shine directly at others.
Exposure Lights / Ultimate Sports Engineering Ltd. accept no liability for any injuries or other damages
arising from the use of their product in any circumstances.
NOTE: Patents apply.

TO SELECT A PROGRAM FROM OFF PRESS AND HOLD THE BUTTON, THE LIGHT WILL EMIT A SET OF FLASHES.
THE BI-COLOUR LED AND WHITE LED WILL THEN FLASH AT REGULAR INTERVALS
PROGRAM 1 RELEASE AFTER THE FIRST FLASH
PROGRAM 2 RELEASE AFTER THE SECOND FLASH
PROGRAM 3 RELEASE AFTER THE THIRD FLASH
PROGRAM 4 RELEASE AFTER THE FOURTH FLASH
SPT+ allows the charge port to power ancillary Exposure accessories such as the RedEye. SPT+ can be
used with Exposure Boost Cables to act as a power bank to charge your USB devices.
SPT+ will automatically activate when the light is on.
To activate SPT+ press and hold the function button, releasing when it rapid ashes.
To deactivate SPT+ simply turn the light on and off again.
SMART PORT TECHNOLOGY+ (SPT+)
OMS allows you to select the burn time combination tailored to your needs. Burn time and lumen output are
directly proportional, if you double the burn time, you halve the lumen output.
OPTIMISED MODE SELECTOR (OMS)
HT 1000
PGM HIGH MEDIUM LOW FLASH SOS
1 1.5 hrs 6 hrs 12 hrs 30 hrs 9 hrs
2 3 hrs 18 hrs 36 hrs 30 hrs 9 hrs
3 1.5 hrs - 12 hrs 30 hrs 9 hrs
4 12 hrs - 48 hrs 30 hrs 9 hrs
BATTERY FEEDBACK
HT1000 – the bi-colour battery indicator is located on the power pack. It will indicate the remaining battery
percentage whilst the light is in use and for 5 seconds after the light has been switched off.
To view the battery status from OFF, press the button once, the front white LED will ash according to the
battery status.
BI-COLOUR BATTERY INDICATOR BATTERY %
GREEN 100 - 85
GREEN PULSE 85 - 70
AMBER 70 - 55
AMBER PULSE 55 - 40
RED 40 - 25
RED PULSE 25 - 10
RED FLASH 10 - EMPTY
Low Voltage Flash
When your light’s battery runs below 10% the front white light will triple ash once.
FLASH BATTERY %
XXXX 100-75
XXX 75-50
XX 50-25
X25-10
NO FLASH 10-0
LIGHT OPERATION ACTION
SWITCH ON DOUBLE PRESS THE BUTTON
CHANGE MODE SINGLE PRESS THE BUTTON
SWITCH OFF PRESS AND HOLD THE BUTTON FOR 1 SECOND
FLASH FROM ON PRESS AND HOLD THE BUTTON FOR 4 SECONDS
SOS FROM ON PRESS AND HOLD THE BUTTON FOR 6 SECONDS
ACTIVATE SPT+ FROM OFF PRESS AND HOLD THE BUTTON, RELEASE DURING RAPID FLASH
LIGHT OPERATION