Extreme Tools EX3204TC User manual

PARTS LIST
REF# DESCRIPTION PART# QTY
__________________________________________
1 Gas Strut 303082 2 pcs.
2 Tray Liner 362711 1 pc.
3 Drawer Liner 362712 4 pcs.
4 Drawer 107418 1 pc.
5 Drawer 107417 1 pc.
6 Lock 304005 1 pc.
7 Slide(L) 300160L 4 pcs.
8 Drawer Pull 301406 4 pcs.
9 Drawer 107416 2 pcs.
10 Slide(R) 300160R 4 pcs.
11 M8x20 Hex Bolt 321027 16 pcs.
12 Washer 324255 16 pcs.
13 Swivel Caster 302000 4 pcs.
14 Bottom Tray 107419 1 pc.
15 Detent 314089 8 pcs.
16 M8x16 Philips Head Bolt 321027 16 pcs.
17 Rubber Bumper 314003 3 pcs.
Extreme Tools®, Inc.
740 Frontenac Road
Naperville, IL 60563
Office: 630 369-9303
Fax: [phone]
EX3204TC DELUXE TOOL CART
PROFESSIONAL STEEL CABINET MANUAL
Professional Tools and Equipment
EX3204TC DELUXE TOOL CART
1. Replacement keys may be ordered, the code
which appears on the face of the lock is required.
2. Give the information for service parts: part number
and quantity.
The keys are taped to the
inside of the first drawer.
1

ASSEMBLY INSTRUCTIONS
1STREMOVE DRAWERS
Remove the drawers from the cart
upper part before installing the pillars.
Pull drawer out so it’s almost fully
extended. Push up right hand black
release lever, while pushing down
left hand black release lever.
While holding the levers in the
positions as instructed above, pull
the drawer outward until it is
released from the drawer slide.
2NDINSTALL PILLARS
Position the pillars over the holes
on the cart upper part and attach
with the M8x16 Philips Head Bolts
provided and tighten them.
EX3204TC DELUXE TOOL CART
Extreme Tools®, Inc.
740 Frontenac Road
Naperville, IL 60563
Office: 630 369-9303
Fax: [phone]
2
EX3204TC DELUXE TOOL CART
PROFESSIONAL STEEL CABINET MANUAL
Professional Tools and Equipment
1. Replacement keys may be ordered, the code
which appears on the face of the lock is required.
2. Give the information for service parts: part number
and quantity.

ASSEMBLY INSTRUCTIONS
5THINSTALL DRAWERS
Stand the cart upright.
Extend the drawer slides from the
tool chest.
Insert the brackets on each side of
the drawer into the slots in the
cabinet slides, being careful that
they are properly positioned.
Once properly inserted, completely
close the drawer to set the slides
in their proper positions.
6THINSTALL HANDLES
Position the handles over the holes
and attach with the M8x16 Philips
Head Bolts provided.
Tighten securely.
EX3204TC DELUXE TOOL CART
ASSEMBLY INSTRUCTIONS
EX3204TC DELUXE TOOL CART
Extreme Tools®, Inc.
740 Frontenac Road
Naperville, IL 60563
Office: 630 369-9303
Fax: [phone]
3
3RDINSTALL BOTTOM TRAY
Carefully lay upper part of the cart
on the floor with soft mat under it.
Position the bottom tray to the
bottom part of the pillar and attach
them together with the provided
M8x16 Philips Head Bolts, and
M8 Hex Lock Nuts, and tighten them.
4THINSTALL CASTERS
Insert the M8x20 Hex Bolts through
the washers, then through the casters
and into the bottom of the cart.
Tighten securely. Repeat for the
other 3 casters.