Extron electronics DVI-RGB 150 User manual

Specifications — DVI-RGB 150 DVI Interface
Video
The DVI-RGB 150 converts a single link DVI signal to an analog RGB signal.
Using an adaptor (the Extron HDMI to DVI-D adapter, part #26-616-01), the DVI-RGB 150 can accept
HDMI signals. It converts HDMI digital RGB signals, but does not support the HDMI digital
component (YCrCb) signal format.
Video input and loop-through
Number/signal type ................... 1 single link DVI-D digital video input
1 single link DVI-D buffered loop-through
Connectors .................................... 1 DVI-D female (DVI input)
1 DVI-D female (DVI loop through)
TMDS nominal level ................... 0.4 V to 0.6 V swing
TMDS impedance ........................ 100 ohms
DC offset (max. allowable) ......... ±0.5 V
Video output
Number/signal type ................... 1 RGBHV, RGBS, RGsB
Connectors .................................... 6 BNC female
Nominal level ............................... 0.7 Vp-p for RGB
Level adjustment range .............. -3 dB to 6 dB (x0.7 to x2)
Peaking adjustment range.......... 0 dB to 6 dB (x1 to x2) at 100 MHz
Impedance .................................... 75 ohms
Output resolution ........................ Follows input, determined by the local DVI loop-through monitor or by the
selector on this product.
Resolution selector resolutions and rates
Setting Resolution Refresh Low Refresh High
0 640x480 60 Hz 75 Hz
1 800x600 60 Hz 75 Hz
2 852x480 60 Hz 75 Hz
3 1024x768 60 Hz 75 Hz
4 1024x852 60 Hz 75 Hz
5 1280x768 60 Hz 75 Hz
6 1280x1024 60 Hz 75 Hz
7 1365x768 60 Hz 75 Hz
8 1366x768 60 Hz 75 Hz
9 1400x1050 60 Hz 60 Hz
A 1600x1200 60 Hz 60 Hz
B 480p 60 Hz 60 Hz
C 576p 50 Hz 50 Hz
D 720p 50 Hz 60 Hz
E 1080i 50 Hz 60 Hz
F 1080p 50 Hz 60 Hz
Return loss .................................... -35 dB @ 5 MHz
DC offset ....................................... ±10 mV maximum with input at 0 offset
Output cable driving distance ... 150' (45 m) at 1600 x 1200 with Extron MHR cable
250' (60 m) at 1024 x 768 with Extron MHR cable
Sync
Output type .................................. RGBHV, RGBS, RGsB
Output level.................................. TTL (5 Vp-p, unterminated)
Output impedance ...................... 75 ohms
Polarity .......................................... Positive or negative (follows input)
1-2 DVI-RGB 150 DVI Interface • Specifications

General
Power............................................. 100 VAC to 240 VAC, 50/60 Hz, 25 watts, internal, autoswitchable.
Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Rack mount ................................... Yes, with an optional 1U rack shelf, part #60-190-01 or 60-604-01; or a 1U, 6" deep
rack shelf, part #60-190-10 or 60-604-10.
Also furniture mountable with an optional MBU 125 under-desk mounting kit,
#70-077-01; or MBD 129 through-desk mounting kit, #70-077-02.
Enclosure type .............................. Metal
Enclosure dimensions ................. 1.7" H x 8.7" W x 6.0" D (1U high, half rack wide)
4.3 cm H x 22.1 cm W x 15.2 cm D
(Depth excludes connectors and knobs.)
Product weight ............................. 1.6 lbs (0.7 kg)
Shipping weight ........................... 4 lbs (2 kg)
Vibration ....................................... ISTA 1A in carton (International Safe Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
All nominal levels are at ±10%.
Specifications are subject to change without notice.
(7.52-070606-D3)
DVI-RGB 150 DVI Interface • Specifications 1-3