exxent 65416 User manual

Keittiövaaka
Käyttöohje

Suomi
DIGITAALINEN KEITTIÖVAAKA 6 KG art 65416
OMINAISUUDET
Kapasiteetti: 6kg, 13,2lb
Tarkkuus: 1g, 0,1 oz
Yksiköt (oletus): g, oz
Kalibrointi: Automaattikalibrointi
Taara-alue: Omapaino, täysi kapasiteetti
Automaattinen sulkeminen (oletus): 60 sek
KÄYTTÖ
1. Aseta vaaka tasaiselle alustalle ja paina ON/OFF –näppäintä käynnistääksesi sen.
2. Et voi käyttää vaakaa ennen kuin LCD-näytössä näkyy ”0”.
3. Aseta esine(et) vaakalevylle hellävaraisesti. LCD-paneeli osoittaa painon muutamassa sekunnissa.
YLIKUORMITTUMINEN
Kun asetettu paino ylittää vaa’an kapasiteetin, LCD-näytölle ilmestyy ”EEEE”. Poista ylimääräinen paino
välittömästi. Vaaka saattaa silti tämän jälkeen toimia normaalisti. Muista: Voit vahingoittaa vaakaa pysyvästi
ylikuormittamalla sitä, joten älä koskaan aseta yli 6000g painoa vaa-alle!
KALIBROINTI
Vaaka on jo kalibroitu tehtaalla, sitä ei tarvitse enää uudelleenkalibroida. Älä kalibroi vaakaa itse, ellet ole
teknisestä huollosta saanut tällaista ohjeistusta.
Kg/Lb
Toimintatilan valinta: Paina painiketta kerran vaihtaaksesi painoyksikköä (g/oz/kg/lb)
HOLD
”HOLD”-toiminnon käyttö
1. Käynnistä vaaka.
2. Aseta esine vaa’alle.
3. Paina näppäintä ”HOLD” (tallenna). Symboli ”HOLD” näkyy näytöllä.
4. Paino tallentuu ja kuuluu pieni äänimerkki (*valinnainen).
5. Paino näkyy 5 sekunnin ajan näytöllä, voit ottaa painon pois vaa’alta ja lukea tallennetun painon.
6. Tyhjentääksesi ”HOLD”-painon, paina näppäintä ”HOLD” uudelleen.
TAARAUS
1. Paina ON-OFF –näppäintä
2. Aseta taarattava esine (kulho) alustalle
3. Paina ”TARE” ja odota muutama sekunti, kunnes näytöllä lukee ”0”
4. Aseta nyt punnittavat tuotteet taaratulle tuotteelle. Tämä toiminto voidaan toistaa 12 kertaa.
HUOM: Kun kaikki tuotteet on poistettu vaa’alta, taarattu arvo näyttää nyt negatiivista lukua. Paina tällöin
”TARE” uudelleen, jolloin näytöllä näkyy jälleen ”0”.

OIKEANLAINEN KÄSITTELY
Säilytä vaakaa puhtaassa, pölyttömässä ja kuivassa ympäristössä. Vältä jatkuvaa tärinää. Älä sijoita
lähelle toisia sähkölaitteita, jotka voivat vaikuttaa vaa’an toimivuuteen ja tarkkuuteen.
Käsittele varoen. Kaikki punnittavat tuotteet tulisi asettaa vaa’alle varoen. Vaikka vaaka on valmistet-
tu kestäväksi, kova käsittely voi pysyvästi vahingoittaa vaa’an sensoria.
Vältä vaa’an ravistelua, pudottamista tai muunlaista kovakouraista käsittelyä. Tämä on tarkkuustyöka-
lu ja sitä tulee käsitellä erityisellä varovaisuudella.
Työskentele ainoastaan tasaisella, värisemättömällä alustalla.
English
6 KG DIGITAL STAINLESS STEEL SCALE Item nr 65416
SPECIFICATIONS
Capacity: 6 kg, 13.21b
Graduation: 1 g; 0,1 oz
Units (default): g, oz
Calibration: Auto calibration
Tare range: Tare full capacity
Auto off (default): 60 seconds
Display: 5 digit LCD
OPERATION
1. Place scale on a level surface and press the “ON/OFF” switch to turn it on.
2. You cannot use the scale until “0” is displayed on the LCD panel.
3. Gently place the object(s) on weighing platform. The LCD panel should accurately display
the weight within seconds.
OVERLOAD
When an applied load exceeds the capacity of the scale “EEEE” will appear on the display. Remove
the excessive load immediately. The unit may return to normal operation. Remember: You can per-
manently damage the scale by overloading it so don´t ever put more than 6000 grams on the scale´s
tray!
CALIBRATION
Your scale was calibrated at the factory before shipment. Should never require service or to be cali-
brated again. Please do not calibrate your scale unless directed to by Tech Support.
Kg/Lb
Mode selection: Press the key once to change weigh unit (g/oz/kg/1b)

HOLD
To use the “HOLD” function.
1) Turn the scale ON.
2) Place your mail piece (or other items) on the scale.
3) Press the “HOLD” key. The symbol “HOLD” will show on the display.
4) The scale will capture the weight and sound Beep (*optional)
5) The scale holds the reading for 5 seconds, you can read the value after removing the item
from the scale´s platform.
6) To clear the HOLD value, simply predd the HOLD again.
TARE WEIGHING
1. Press ON/OFF button as described above
2. Place the “tare item” on the platform
3. Press TARE and wait for several seconds until “0” is displayed
4. Add the “net-weigh-item”
This process can be continued up to 12 items.
NOTE: When all weight is removed from the scale, the tared value of a container will be displayed as
a negative number. Depress tare again to return the display to 0.
Thank you for purchasing this scale, with normal care and proper treatment it will provide years of
reliable service. Please read all operating instructions carefully before use.
PROPER HANDLING
Avoid exposure to extreme heat or cold. Your scale should be operated at normal room temperature.
Always allow the scale to adjust to room temperature for one hour per degree change before use.
Give your scale sufficient warm up time. It usually takes 20-60 seconds for the internal components
to stabilize.
CARING FOR YOUR SCALE
Your scale should be kept in a clean environment free from dust, dirt, moisture and vibration. Do not
place close to other electronic equipment. All can adversely affect the reliability and accuracy of your
scale.
Handle with care. All items to be weighed should be placed gently onto weighing surface. Although
this scale is designed to be quite durable, rough treatment may permanently damage the internal
sensor.
Avoid shaking, dropping or otherwise shocking the scale. This is a precision instrument and must be
handled with extreme care.
Only operate the scale on a stable, vibration free surface.
Table of contents
Languages: