EZ Lighting EZSH010650BL00 User manual

LED Security Lighng Fixture
Model#:
EZSH010650BL00
Remove the fixture and mounng package from the box and make sure that no parts
are missing by referencing the illustraon on the installaon instrucons.
User Manual
Congratulaons onyour EZ LIGHTING products purchase
PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION
ASSEMBLY AND INSTALLATION
1. Install the back mounng plate with the stamped word "this end up" facing away from the selected
mounng locaon. Use the back mounng plate screws and wall anchors to secure to wall.
2. Firmly push the lighng fixture onto the back mounng plate ensuring that top of fixture “snaps”
to the back mounng plate. Then install the thumb screw on the boom of the fixture.
3. Install the solar panel to wall using screws and wall anchors. Note that locaon selected for solar
panel should have prevalent sunlight.
4. Then connect solar panel to lighng fixture by plugging into boom of fixture. Note that solar panel
can be located up to 15’ from lighng fixture.
5. Seng Controls: Rotate sensor 340 degrees to access controls. Set controls to desired sengs and
rotate sensor to return to desired sensing direcon.
LED
X1 X8 X8 X4
7.12”
4.67”
10.99”
5

Trouble Shooting
EZ Lighng LLC
1385 Hwy35, Suite 116, Middletown, NJ 07748
Tel:[phone]
Website:www.ez-lighng.com
Mail: customercare@ez-lighng.com
Provided by www.ez-lighng.com
SPECIFICATIONS
EZ Lighng proudly presents our LED Security fixture ulizing the lastest in LED technology for
maximum light output in a low-profile, compact housing. These fixtures come with a
sophistcated moon sensor for increased safety, security and peace of mind. It produces a
light output of up to 400lm. The security light with moon sensor is the perfect system for
your home and business. It is controlled by a sensor, which measures ambient luminance and
movement. The average detecon distance of up to 39 feet (12 meters), with a 180°
detecon range.
LED Security Lighng Fixture
This device complies with part 15 of the FCC Rules.Operaon is subject to the following
two condions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operaon.
EZ Code Type Waage Voltage Kelvin CRI IP Rang Lumens
EZSH010650BL00
Solar 6
Solar power
5000 Cool
80+ IP 44 400
2
1.Make sure wire is seated properly in boom
of lighng fixture
1.Faulty connecon between
lighng fixture and solar panel.
2.Verify that solar panel is in locaon with
prevalent sunlight
2.Insufficent stored energy to power
lighng fixture
3.Baery is no longer able to
store energy 4.Replace baery
Light will not turn
on.
3.Wait for solar panel to properly charge
baery
Correcve Acon
1.When the arrow on the “TEST / OFF / AUTO“ adjustment screw is at the “Test“ seng, the
dimming funcon is deacvated. If any movements are detected, the connected load is
switched on for “5“ seconds. The “Time“ funcon is deacvated under this seng.
2.The switch posion "AUTO" acvates the movement sensor funcon. The switch posion
"OFF" switches the LED light.
3 . In order to ensure a sufficient baery charge, the solar collector surface must be subjected
to prevailing sunlight during dayme.
4.Switch posion "Off" = LED Light will not acvate, rechargeable baeries will be charged
during daylight.
5. Switch posion "Auto" = Rechargeable baery operaon - LED light will acvate in the dark,
rechargeable baeries will be charged during daylight.
6. The operaon cycle with fully charged accumulators is “2” hours.
7. The sensor’s scope of detecon is between “10“ and “40“ (adjustable). The installaon
height should preferably be adjustable between “6“ and “8.3“ . The angle of
detecon is “150 °“.
8. When movement is detected, the operang period of the connected load is between “5“
seconds and “3“ minutes (adjustable). When new movements are detected during this original
operang period, the duraon is always lengthened by the amount of me set by the user.
Motion sensor functions:
Please scan below QR code for installaon video.