EZ-ON SHT-330XM/EN/AU User manual

GC68-00874A ED:01

Contents
1
This marking shown on the product or its
literature, indicates that it should not be
disposed with other household wastes at the
end of its working life. To prevent possible
harm to the environment or human health from
uncontrolled waste disposal, please separate
this from other types of wastes and recycle it
responsibly to promote the sustainable reuse
of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details
of where and how they can take this item for environmentally safe
recycling.
Business users should contact their supplier and check the terms
and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for
disposal.
Contents
Preface
Precautions
•Safety Precautions ...................................................... 2
Chapter 1 : Preparation
Names and Functions
•Product - Household unit ............................................ 4
•Interphone (SHT-IPE200/EN-Optional) ................... 5
Chapter 2 : Operation
Entrance Functions
•When a visitor is outside the entrance ...................... 6
•Checking outdoor status ............................................ 7
Interphone Functions (Optional)
•Making internal calls .................................................... 8
User Setting Functions
•Entering for user setting mode ................................ 10
•Setting the melody type ............................................ 10
•Adjusting voice volume/screen ............................... 11
•Setting the time .......................................................... 11
•Deleting all stored images ........................................ 12
•System initialization ................................................... 12
Supervisor setting Functions
•Entering for supervisor setting mode ...................... 13
•Setting the ID ............................................................. 13
•Setting the Camera Quantity ................................... 14
•Setting the Bell ........................................................... 14
•Setting the Multi-looby phone .................................. 15
•Setting the Door Open ............................................. 15
•Setting the Open Time ............................................. 16
•Setting the Call Time ................................................ 16
•Setting the Talk Time ................................................ 17
•Setting the NAND Flash Bulk Check ..................... 17
•Setting the Video mode ............................................ 18
•Initializing the Supervisor mode .............................. 18
•Setting the Chroma Delay ....................................... 19
•Setting the Stroge Image Number .......................... 19
Visitor Image Functions
•Auto-recording of missed visitor images ................ 20
•Auto-recording of door camera stolen .................... 20
•Recording visitor images manually ......................... 20
•Replaying stored images ......................................... 21
•Deleting the current image ....................................... 21
Chapter 3 : Installation
Installation
•Household unit/Interphone ...................................... 22
•Door Camera ............................................................. 23
Wiring
•3Household+2Door phones (Door locks) ............. 24
•3Interphones+2Door phones (Door locks) ............ 26
•1 Household + 2 Interphones + 1 Door phone
(Door lock) + 1 multi-lobby phone ........................... 28
•1 Door lock + 1 Doorbell .......................................... 28
Settings
•Connection cable specifications .............................. 29
•Various settings ......................................................... 29
Chapter 4 : Useful Information
Components
•Household unit [SHT-3305 Series] ............................... 30
•Interphone[SHT-IPE200/EN] ........................................ 30
•Door Camera [SHT-CP601/EN,
SHT-CP611/EN, SHT-CP611E/EN] .................................... 30
Troubleshooting
•Check this first! .......................................................... 31
Product Specifications
•Household unit [SHT-3305 Series] ............................... 32
•Interphone[SHT-IPE200/EN] ........................................ 32
•Door Camera[SHT-CP601/EN,
SHT-CP611/EN, SHT-CP611E/EN] .................................... 33
Memo ............................................................................. 34
Product Warranty ....................................................... 35

32
▶▶Safety Precautions
* Please review the content below to ensure safe and precise product usage.
Precautions
Neglect to follow directions can result
in death or serious injury. Neglect to follow directions can result
in injury or material loss.
Warning Caution
Do not place the product near a heat source (e.g.
heater) or source of moisture (e.g. aquarium,
humidifier).
●It may cause product
malfunction and/or fire.
Do not subject the product to any heavy shock
such as striking with a
hard object
(e.g. hammer, etc.).
●It may cause product
malfunction, electric
shock, and/or fire.
Do not allow water or other liquid to enter the
product interior.
●It may cause product electric
shock and/or fire.
Do not allow water to enter the camera interior
when cleaning.
●It may result in electrical
shock and/or fire.
Do not disassemble, install, or repair this product
on your own accord.
●Contact the service center for any repair needs.
Unauthorized handling
may cause product
malfunction, electric
shock, and/or fire.
If the product emits a peculiar noise, odor, and/or
smoke, immediately lower the circuit breaker
connected to the electric heater switch
(ONT product connection)
in the power cabinet panel,
and then contact the
service center.
●Beware the risk of
electric shock
and/or fire.
Do not hang from or pull on the installed\ product.
●Take special care to prevent
such abuse by small
children as injury may
occur.
Make sure to pass the user manual onto the new
home owner/tenant when moving.
●It can prevent any product misuse by the new
home owner/tenant.
Do not use pins or any sharp, pointy objects to
press buttons or to insert into holes.
●It may cause product electric shock and/or fire.
Do not clean using wet cloths or volatile
substances (e.g. alcohol, benzene, thinner).
●It may cause product electric shock and/or fire.
※After receiving service, ask the service representative to perform a safety inspection.
Be careful when standing up after sitting under
the installed product.
●Head injuries may occur
from any impact with
the installed product.
Preface
Warning
Warning
Caution

Note
Names and Functions
5
▶▶Interphone (SHT-IPE200/EN: Optional)
4
▶▶Product - Household unit
1 2 3
4 5 6
7 8 9
0 #
HOME INTERPHONE
SHT-1100
①Handset
This is used to communicate with a visitor outside
the entrance or the common entrance or make
calls to the interphone.
②LCDscreen
This shows the visitor's image.
③POWER indicator
This lamp turns red when the power is normal
and blinks in communication failure.
④DOOR indicator
When doorbell is connected, this lamp blinks if the
bell rings.
⑤SETbutton
This button is used to change various settings
(e.g. Bell sound, call volume, screen brightness,
initialization, etc.)
⑥+/-button
This is used to adjust bell sound, call volume and
screen brightness.
⑦Speaker
This is used to output bell sound or voice during
communication with a visitor outside the entrance
(doorbell)/common entrance or when making a
call to the interphone.
⑧Powerswitch
This is used to turn the power on/off.
⑨Interphone button
This is used to make calls to the interphone.
⑩Record/Replay button
This is used to store images on the screen or play
stored images.
⑪Door Open[release] button
This is used to open the entrance/common
entrance during a call.
⑫Callbutton
This is used to check the status outside the
entrance, answer an incoming call with the
handset picked up or to make a speakerphone
call.
⑬Microphone
This is used to make a call with a visitor outside
the entrance/common entrance or to the
interphone.
①Callbutton
This is used to call the household unit from the
interphone or answer an incoming call with the
handset picked up.
②Openbutton wih LED lamp
This is used to open the door with an incoming
call from the entrance lobby or during a call with a
visitor at the entrance lobby.
[Indication of LED lamp]
- RED blinking : before ID setting
- RED light : complete ID setting
- GREEN blinking : incomming/out going a call
- GREEN light : during a call
③Handset
This is used to make a call.
④Bell Adjuster
This is used to adjust bell volume.
It can adjust both call volume and melody
volume.
SHT-3305XM
1
4
5
6
7
8
9 10 11 12 13
2 3
Preparation
Chapter 1
SLAVE3
DOOR1
DOOR2
LOCK2 LOCK1
SLAVE2 SLAVE1
JTAG1
BELL_1
UART1 J1
JTAG1
SLAVE
MS
ISP
Master
Interphone
6
5
4
3
2
1
6
5
4
3
2
1
123
Initial Setting for Interphone ID
1. Insert or remove the jumper on the bottom of
SHT-IPE200/EN for desired Interphone ID setting
as below;
JTAG1
SLAVE
MS
123
Pin1~3 OFF
123
Pin1-2 ON
123
123
123
Pin2-3 ON
Slave 1 Slave 2 Slave3
123
2. Connet to SLAVE1~3 port on the SHT-3305’s
bottom and SHT-IPE200/EN’s bottom by using
ext. haness(6 pins).
OPEN LED lamp will start blinking a few seconds, then
lighted when Slave ID is set to correctly.
If OPEN LED is blink continually, recheck each jumpers
of SHT-IPE200/EN.

2
You can open the entrance door
by pressing the Door Open
button during a call.
SHT-3305XM
6
These functions enable user to make a call to a visitor outside the entrance or open the entrance door.
Entrance Functions
These functions enable you to check the status outside the entrance.
Entrance Functions
7
▶▶When a visitor is outside the entrance
•The limits for a call time and talk time are 1 minute
and 3 minutes, respectively. If a call is not made
within the a call time limit, the visitor’s image is
recorded/stored automatically.
•Each time the doorbell rings, the Call LED
blinks.
If you want to make a call to the visitor, pick
up the handset and make a call.
1
Bell rings and the screen displays
the image of the visitor outside the
entrance.
SHT-3305XM
3
To hang up a call, replace the
handset.
1. Installing the door lock system designated by our company to your entrance door enables you to open the door by
pressing the Door Open button during an entrance call.
2. You can adjust voice volume, color, contrast or brightness with +or ––button referring to the text under the
screen after pressing the SET button.
3. When doorbell rings, you can open the relevant door by pressing the Door Open button with no call connection.
If you repeatedly press the Call button, the entrance hall images are displayed in turn.
If you press the Call button in standby mode, the entrance image is displayed on the screen and
a call is connected.
••If you press the Call button with the handset picked up, the phone is connected in handset mode.
If you press the Call button in standby mode, the phone is connected in speakerphone mode.
▶▶Checking outdoor status
•The outdoor image screen is automatically turned off after 50 ~ 60 seconds.
•Doorbells and multi-lobby phones do not support“Checking outdoor status.”
•You can open the entrance door by pressing the Door Open button while the outdoor image is displayed.
When there are two or more door pins
When there is one door pin
• If an interphone is connected, the incoming bell
rings from the interphone.
•For interphone call (option), pick up the interphone
and make a call.
•For interphone (option), you can open the
entrance door by pressing the Door Open button
during a call.
•For interphone (option), replace the interphone
handset to hang up a call.
SHT-3305XM
SHT-3305XM
SHT-3305XM
SHT-3305XM SHT-3305XM
•The outdoor image can be displayed for up to one
minute.
•You can open the entrance door by pressing the Door
Open button while the outdoor image is displayed.
Operation
Chapter 2
Note
•If the current call is switched to speakerphone
mode by pressing the Call button in handset mode,
you can continue the call in speakerphone mode
after replacing the handset.

1
Press the Interphone button with
the handset picked up.
98
These functions enable you to make internal calls when another monitor or an interphone is installed.
Interphone Functions (Optional)
▶▶Making internal calls
2
A melody sounds from sub-phone
(another SHT-3305) or the interphone.
1. If internal calls are not answered for one minute, the calls are disconnected.
2. Internal calls are automatically hung up after 3 minutes.
1
Press the Call button with the
handset of the interphone picked up.
2
An interphone call melody sounds
from the household unit.
When calling the interphone from the household unit When calling the household unit from the interphone
3
Now, you can accept the call with
the handset of the interphone.
4
To hang up the call;
During the speakerphone mode,
press the Call button of the
household unit, during the handset
mode, replace the handset of the
interphone or the household unit.
1 2 3
4 5 6
7 8 9
0 #
HOME INTERPHONE
SHT-1100
1 2 3
4 5 6
7 8 9
0 #
HOMEINTERPHONE
SHT-1100
1 2 3
4 5 6
7 8 9
0 #
HOMEINTERPHONE
SHT-1100
1 2 3
4 5 6
7 8 9
0 #
HOME INTERPHONE
SHT-1100
1. If internal calls are not answered for one minute, the calls are disconnected.
2. Internal calls are automatically hung up after 3 minutes.
3
Now, you can accept the call with
the handset of the household unit.
4
To hang up the call;
During the speakerphone mode,
press the Call button of the
household unit, during the handset
mode, replace the handset of the
interphone or the household unit.
1 2 3
4 5 6
7 8 9
0 #
HOMEINTERPHONE
SHT-1100
1 2 3
4 5 6
7 8 9
0 #
HOMEINTERPHONE
SHT-1100
SHT-3305XM
SHT-3305XM
SHT-3305XM
SHT-3305XM
•An incoming bell signal occurs in another
monitor or the interphone.
•An incoming bell signal occurs in the interphone.
SHT-3305XM
SHT-3305XM
•If the current call is switched to speakerphone mode by
pressing the Call button in handset mode, you can
continue the call in speakerphone mode after replacing
the handset.
•If the current call is switched to speakerphone mode by
pressing the Call button in handset mode, you can
continue the call in speakerphone mode after replacing
the handset.
Operation
Chapter 2
Note
Note

1110
▶▶Entering for user setting mode
These functions are used to customize some product functions in the user’s environment.
User Setting Functions
1
Select a desired setting mode by repeated pressing the SET button in standby mode.
Press +/-button to enter the selected mode.
SHT-3305XM
These functions enable you to make internal calls when
another monitor or an interphone is installed.
•To exit the user setting mode, select D.EXIT, and then press the Interphone button to save your settings.
In addition, if there is no input for more than 10 seconds, the mode is automatically ended.
Operation
Chapter 2
-.---.-.-.-----.---.-.-.
---..-.---.-..---.------.--.-
---.----.---.-.-...---.-.
-.-.---.--.-.----.-----.
< USER MODE >
1. DOOR1 MELODY SELECT 1
2. DOOR2 MELODY SELECT 2
3. SLAVE MELODY SELECT 3
4. MELODY VOLUME ADJUST 2
5. ALL IMAGE DELETE NO
6. FACTORY DEFAULT NO
7. VIDEO MODE OSD COLOR RED
8. RTC YEAR ADJUST 2009
9. RTC MONTH ADJUST 01
A. RTC DATE ADJUS 02
B. RTC HOUR ADJUST 03
C. RTC MIN ADJUST 04
D. EXIT Ver1.0
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the standby mode, press the SET button repeatedlly to select 8.RTC YEAR ADJUST ~ C.RTC MIN
ADJUST.
2. Press the +/ -or SET buttons to adjust the desired time.
+ : Increase the setting value - : Decrease the setting value
SET: Move to the specified item.
(Move to YEAR →MONTH →DAY →HOUR →MIN in turn.)
3. To save the selected settings, press the Interphone button.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶▶Setting the time
•To exit the user setting mode, select D.EXIT, and then press the Interphone button to save your settings.
In addition, if there is no input for more than 10 seconds, the mode is automatically ended.
•If the unit power is off for more than 5 minites, the RTC settings will are reset automatically.
SHT-3305XM
1. While an image is displayed on the screen, press the SET button repeatedlly to select the desired
adjustment mode as below;
TALK VOLUME 2
→
COLOR STEP 2
→
CONTRAST STEP 2
→
BRIGHT STEP 2
→
EXIT.
2. Press the +/ -buttons to select the desired value.
+ : Increase the setting value - : Decrease the setting value
•Each setting can be set up to level 4, and the initial setting value is 2.
3. To save the selected settings, press the Interphone button.
SHT-3305XM
▶▶Adjusting the voice volume/screen
•To exit the user setting mode, select EXIT, and then press the Interphone button to save your settings.
In addition, if there is no input for more than 10 seconds, the mode is automatically ended.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the standby mode, press the SET button repeatedlly to select the desired melody selection item.
(1.DOOR1 MELODY SELECT ~ 3.SLAVE MELODY SELECT)
2. Press the +/ -buttons to select the desired melody type as below;
1. Ding-dong 1 2. Ding-dong 2 3. Ding-dong 3 4. Guitar bell 1
5. Guitar bell 2 6. Love’s greeting 7. Tambourine 8. Canon (Pachelbel)
3. To save the selected settings, press the Interphone button.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶▶Setting the melody type
•Melodies can be repeatedly selected for each bell sound of Door 1, Door 2 (Lobby) and Slave (Interphone).
•To exit the user setting mode, select D.EXIT, and then press the Interphone button to save your settings.
In addition, if there is no input for more than 10 seconds, the mode is automatically ended.
Set/select melodies for Door 1, Door 2 (Lobby) and/or Slave (Interphone).
TALK VOLUME 2

Supervisor setting Functions
1312
These functions are used to customize some product functions in the user’s environment.
User Setting Functions
Operation
Chapter 2
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the standby mode, press the SET button repeatedlly to select the 5.ALL IMAGE DELETE.
2. Press the +/ -buttons to select the YES or NO.
YES: perform the deleting all images NO: cancel the deleting all images
3. To excute the selected condition, press the Interphone button.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶▶Deleting all stored images
•To exit the user setting mode, select F.EXIT, and then press the Interphone button to save your settings.
In addition, if there is no input for more than 10 seconds, the mode is automatically ended.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the standby mode, press the SET button repeatedlly to select the 6. FACTORY DEFAULT.
2. Press the +/ -buttons to select the YES or NO.
Yes: Perform the initialization No: Cancel the initialization
3. To excute the selected condition, press the Interphone button.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶▶System initialization
•To exit the user setting mode, select F.EXIT, and
then press the Interphone button to save your
settings.
In addition, if there is no input for more than 10
seconds, the mode is automatically ended.
•Default setting values
- Door 1 melody: Ding-dong 1
- Door 2 melody: Ding-dong 2
- Slave melody: Ding-dong 3
- Voice volume/melody volume: 2 levels
- Color/Contrast/Brightness: 2 levels
- EVR: Deletion of all images
- RTC: 2009/01/02/03/04
1. Remove the J1 Jumper on the SHT-3305’s buttom to enter supervisor mode.(refer to 29 page)
2. Press the SET button to select a desired supervisor setting item.
3. Press +/ -button to select the value for selected setting item.
< SUPERVISOR MODE >
1. ID SET MASTER
2. CAMERA QUANTITY 1
3. BELL SET RELEASE
4. MELTI LOBBY SET RELEASE
5. DOOR1 OPEN SET MAIN
6. DOOR2 OPEN SET MAIN
7. DOOR1 OPEN TIME SET 1SEC
8. DOOR2 OPEN TIME SET 1SEC
9. DOOR1 CALL TIME SET 1MIN
A. DOOR2 CALL TIME SET 1MIN
B. SLAVE CALL TIME SET 1MIN
C. DOOR1 TALK TIME SET 3MIN
D. DOOR2 TALK TIME SET 3MIN
E. SLAVE TALK TIME SET 3MIN
M. NAND BULK ADJUST NO
N. VIDEO MODE SELECT NTSC
O. SUPERVISOR DEFAULT NO
Q. CHROMA DELAY 1SEC
R. STORAGE IMAGE 128
SLAVE3
DOOR1
DOOR2
LOCK2 LOCK1
SLAVE2 SLAVE1
JTAG1
BELL_1
UART1 J1
OFF
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.------.--.-
---.----.---.-.-...---.-.
-.-.---.--.-.----.-----.
▶▶Entering for supervisor setting mode
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select 1.ID SET.
2. Press the +/ -buttons repeatedlly to select the Master, Slave 1, Slave 2 or Slave 3.
3. Press the Interphone button to stored your setting, then exit.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶▶Setting the ID
Set to the Master or Slave mode, and select to Slave’s ID.
•After connecting to the slave unit, be sure to set the SLAVE ID without overlap.
Do not overlap the SLAVE ID when multi-units are connected, it may cause malfunction of the master or the slave unit.
•To save and exit the your settings, press the Interphone button.
In addition, if there is no input for more than 10 seconds, the setting mode is automatically ended.
These functions are used to customize some product functions in the user’s environment.

1514
These functions are used to customize some product functions in the user’s environment.
Supervisor setting Functions
Operation
Chapter 2
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select 2. CAMERA QUANTITY.
2. Press the +/ -buttons repeatedlly to select the 1, or 2.
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
Set to the camera quantity for the monitoring function.
•After connecting to the cameras, set to be sure correctly that you connected all cameras quantity.
Do not set to correctly, it may cause malfunction of the monitoring.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select 3. BELL SET.
2. Press the +and -buttons repeatedlly to select the SET or RELEASE.
SET: The BELL_1 port is connected the door bell.
RELEASE: The DOOR1 port is connected the door phone
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶▶Setting the Bell
Set to activation of the door bell mode for the DOOR1 port.
•After connecting to the bell instead of the DOOR1, be sure set to “SET” on the 3.BELL SET item and the DOOR1 port
can not connect to nothing.
•When the BELL SET is SET, call time is set 30 seconds, door open function is activated, talk and monitoring functions
are disabled.
▶▶Setting the Camera Quantity
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select 4.MELTI LOBBY SET.
2. Press the +/ -buttons repeatedlly to select the SET, or RELEASE.
SET: The DOOR2 port is connected the multi-lobby phone.
RELEASE: The DOOR2 port is connected the door phone
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
Set to activation of the Multi-lobby phone mode.
•After connecting to the Multi-lobby phone instead of the DOOR2, be sure set to “SET” on the 4.MELTI LOBBY SET
item. The DOOR2 monitoring function is disabled.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select 5.DOOR1 OPEN SET or
6.DOOR2 OPEN SET.
2. Press the +and -buttons repeatedlly to select the MAIN or CAMERA.
MAIN: The LOCK1/2 port is connected the door lock.
CAMERA: The LOCK1/2 port is connected the door camera(SHT-CP611E/EN)
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶▶Setting the Door Open
Set to a door lock or door camera function for the Door1/2 port.
•After connecting to the door lock or door camera to the LOCK1/2 port, be sure set to “MAIN” or “CAMERA” on the
5/6.DOOR1/2 OPEN SET item. If the DOOR1/2 OPEN SET is CAMERA, the door lock’s open function is disabled .
▶▶Setting the Multi-looby phone

1716
These functions are used to customize some product functions in the user’s environment.
Supervisor setting Functions
Operation
Chapter 2
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select 7.DOOR1 OPEN TIME
SET or 8.DOOR2 OPEN TIME SET.
2. Press the +/ -buttons repeatedlly to select the desired time (1SEC ~ 10SEC).
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
Set to the door lock open time for the Door1/2 port’s door open function.
•After connecting to the door lock to the DOOR1/2 port, be sure set to the door open time on the 7/8.DOOR1/2 OPEN TIME
item. Do not set to the DOOR1/2 OPEN TIME correctly, the door lock’s open function can not used.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select the 9.DOOR1 CALL TIME
SET, A.DOOR2 CALL TIME SET or B.SLAVE CALL TIME SET.
2. Press the +and -buttons repeatedlly to select the desired time (15SEC ~ 10MIN).
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶▶Setting the Call Time
Set to the each call time limit for the Door1/2 or slave port’s.
•After connecting to the DOOR1/2 or SLAVE port, be sure set to the call time limit on the 9/A.DOOR1/2 CALL TIME
SET and B.SLAVE CALL TIME SET item.
•If a call is not made within the DOOR1/2’s call time limit, the visitor’s image is recorded/stored automatically.
▶▶Setting the Open Time
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select the C.DOOR1 TALK TIME
SET, D.DOOR2 TALK TIME SET or E.SLAVE TALK TIME SET .
2. Press the +/ -buttons repeatedlly to select the desired time (30SEC ~ 1HOUR).
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
Set to the each talk time limit for the Door1/2 or slave port’s.
•After connecting to the DOOR1/2 or SLAVE port, be sure set to the talk time limit on the C/D.DOOR1/2 TALK TIME
SET and E.SLAVE CALL TIME SET item.
•When the DOOR1 port is connected to door bell, the C.DOOR1 TALK TIME SET is not activated.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select the M.NAND BULK
ADJUST.
2. Press the +and -buttons repeatedlly to select the YES or NO.
Yes: Activate the NAND flash bulk check function
No: Disable the NAND flash bulk check function
3. Press the Interphone button to store your setting.
•If the M.NAND BULK ADJUST set to YES, the unit will be start NAND flash bulk checking for more than 7 minutes.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶▶Setting the NAND Flash Bulk Check
Set to the NAND flash bulk check function enable or disable.
▶▶Setting the Talk Time

1918
These functions are used to customize some product functions in the user’s environment.
Supervisor setting Functions
Operation
Chapter 2
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select the O.SUPERVISOR
DEFAULT..
2. Press the +/ -buttons repeatedlly to select the YES or NO.
Yes: Perform the initialization No: Cancel the initialization
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select the Q.CHROMA DELAT.
2. Press the +and -buttons repeatedlly to select the desired time (1SEC ~ 3SEC).
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶▶Setting the Chroma Delay
Set to the Chroma delay time for image displaying.
▶▶Initializing the Supervisor mode
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select the R.STORAGE IMAGE
NUM.
2. Press the +and -buttons repeatedlly to select the desired number (32, 64, 128 or 333).
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
▶▶Setting the Stroge Image Number
Set to the number of stroge image.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
1. During the Supervisor setting mode, press the SET button repeatedlly to select the N.VIDEO MODE
SELECT.
2. Press the +/ -buttons repeatedlly to select the NTSC or PAL.
3. Press the Interphone button to store your setting.
SHT-3305XM
-.---.-.-.-----.---.-.-.
---..-.---.-..---.----
---.----.---.-.-...---.-.
---..-.---.-..---
Set to the video signal scanning type for door camera1/2.
•After connecting to the DOOR1/2 port to camera (lobby), be sure set to the camera’s video signal scanning type on the
N.VIDEO MODE SELECT item.
•When the DOOR1 and DOOR2 port are connected to cameras, the both camera device’s video signal type are same mode,
otherwise display will be abnomal
▶▶Setting the Video mode
•Supervisor Default setting values
- ID MASTER
- Camera Quantity 1
- Bell set Release
- Melti lobby Release
- Door1 open Main
- Door2 Open Main
- Door1 open time 1sec
- Door2 open time 1sec
- Door1 call time 1min
- Door2 call time 1min
- Slave call time 1min
- Door1 talk time 3min
- Door2 talk time 3min
- Slave talk time 3min
- Nand bulk adjust no
- Video mode NTSC
- Indicate LED OFF
- Chroma dealy 1sec
- Storage image num 128
- EVR rimage ALL clear
•After set to the R.STORAGE IMAGE NUM, the stored all images are deleted.

1
2120
▶▶Auto-recording of missed visitor images
These functions are used to record/store visitor images
Visitor Image Functions
1
If a call by a visitor is disconnected by not answering
the call within CALL TIME by supervisor setting, the
visitor’s image is recorded/stored automatically.
•The recorded/stored images can be replayed/checked/
deleted in visitor image replay mode.
•The calling visitor's images are automatically recorded/stored in absent status or during sleeping time.
SHT-3305XM
▶▶Auto-recording of door camera stolen
1
Ambient images that the camera installed in the entrance
was facing at the moment when the camera is deviated or
detached from the normal position are recorded/stored with
warring bell.
•To stop the warring bell, press and hold the Interphone button
for more 2 seconds. (In case of IPE200 model : press and hold the
Open button for more 2 seconds in the standard mode)
••For return to tamper activation after tamper’s detection
Be sure release to tamper’s stop mode and reconnect to camera,
then reset the power.
•This function is applied only when SHT-611E/EN equipped with a tamper switch for camera anti-theft is installed.
▶▶Recording visitor images manually
When an image is displayed on the screen,
the screen image can be recorded/stored at
any time by pressing the Record/Replay
button.
•Visitor images are manually recorded/stored when the images are displayed on the screen.
▶▶Replaying stored images
1
The stored images can be
replayed by pressing the Record/
Replay button in standby mode.
2
The next image can be replayed by
pressing the +and -buttons in
image replay mode.
SHT-3305XM
•If no image is stored, the text showing “No Image” is displayed on the screen.
▶▶Deleting the current image
1
The current image can be deleted by pressing
Interphone button in image replay mode.
SHT-3305XM
SHT-3305XM
Operation
Chapter 2

2322
Installation
Installation
Chapter 3
Product Installation Drawing - Installation method and height of household unitautomatically.
▶▶Household unit/Interphone
1. Select a place to install the product.
(Install the product and place the center of the
household unit or interphone at a height of 145
cm from the floor.)
2. Fix the wall mount bracket on the selected
place with 2 screws.
3. Connect the wires of the door camera and
interphone (optional) to the household unit
terminal.
4. After mounting the household unit or
interphone on the bracket, secure it with
screws on the bottom of the household unit.
5. Connect the power cord or AC Adaptor(only
for SHT-3305XM/AU).
6. Turn on the power switch on the bottom of the
product and make sure that the power is
applied.
•Be careful of electric shock and fire when connecting AC
power or AC Adaptor(only for SHT-3305XM/AU).
•Be sure turn on the power switch after connecting the
power cord or AC Adaptor(only for SHT-3305XM/AU).
only for SHT-3305XM/AU
only for SHT-3305XM/AU
Warning
How to install
INTERPHONE
Camera Installation Drawing - Installation method and height of door camera
▶▶Door Camera
How to install
1. Select a place to install the product.
(Install the door camera and place the center of the camera at a height of 145 cm from the floor.)
2. Fix the wall mount bracket on the selected place with 2 screws.
3. Connect the connection wire of the household unit to the door camera terminal.
4. Check that the household unit can be called.
Cautions for installation
1. Avoid the direct sunlight, or a place where rainwater spatters, or it is near chemicals and high voltage
power lines.
2. Do not install in a place with too high or too low temperatures if possible.
◆SHT-CP601EN, SHT-CP611/EN, SHT-CP611E/EN

2524
SLAVE3
DOOR1
DOOR2
LOCK2 LOCK1
SLAVE2 SLAVE1
JTAG1
BELL_1
UART1 J1
Master
SLAVE1
SLAVE1
SLAVE1
Slave3
Slave2
Slave1 Door Phone1
Door Lock1
Door Phone2
Door Lock2
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
▶▶3 Household units + 2 Door phones (Door locks)
For safety and correct product connection, always install the product as shown in the wiring diagram below;
Wiring
Installation
Chapter 3
To select slave mode for SHT-3305XM (be sure connect to Slave1), perform the following procedure:
1. Remove the J1 shunt on the bottom of SHT03305XM to set to supervisor setting mode.
2. Press the SET button in supervisor mode to select [1. ID SET SLAVE1].
3. Press the +and -buttons to select the [SLAVE1].
4. Press the Interphone button to save and eixt.
To set the connected unit to SLAVE device, be sure set to the SLAVE ID without overlap.
If the SLAVE ID is overlaped, the unit may malfunction.
Note

2726
SLAVE3
DOOR1
DOOR2
LOCK2 LOCK1
SLAVE2 SLAVE1
JTAG1
BELL_1
UART1 J1
Master
JTAG1
SLAVE
MS
ISP
123
123
Pin2-3 ON
Slave 3
123
JTAG1
SLAVE
MS
ISP
123
JTAG1
SLAVE
MS
123 Pin1-2 ON
123
123
Slave 2
ISP
Pin1~3 OFF
123
Slave 1
Interphone3
Interphone2
Interphone1
Door Lock1
Door Lock2
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
Door Phone1Door Phone2
▶▶3 Interphones+ 2 Door phones (Door locks)
For safety and correct product connection, always install the product as shown in the wiring diagram below;
Wiring
Installation
Chapter 3

28
Wiring
29
For safety and correct product connection, always install the product as shown in the wiring diagram below:
▶▶Connection cable specifications
▶▶Various settings
•This function is applied only
•After changing the setting switch, always turn the power off and on.
JTAG1
SLAVE
MS
ISP
123
JTAG1
SLAVE
MS
123
ISP
SLAVE1
SLAVE3
DOOR1
DOOR2
LOCK2 LOCK1
SLAVE2 SLAVE1
JTAG1
BELL_1
UART1 J1
Master
Interphone2
Slave1
Pin1-2 ON
123
123
Slave 2
Interphone3
123
Pin2-3 ON
Slave 3
123
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
6
5
4
3
2
1
Muti Robbi Phone
Door Phone
SLAVE3
DOOR1
DOOR2
LOCK2 LOCK1
SLAVE2 SLAVE1
JTAG1
BELL_1
UART1 J1
Master
Door Lock1
To Ext. Bell
▶▶
Household unit + 2 Interphones + door phone (Door lock) + multi-lobby phone
▶▶1 Door lock + 1 Doorbell
Settings
Installation
Chapter 3
◆Setting supervise mode
[Setting J1 Jumper on the SHT-3305’s buttom]
SLAVE3
DOOR1
DOOR2
LOCK2 LOCK1
SLAVE2 SLAVE1
JTAG1
BELL_1
UART1 J1
ON
OFF
Normal mode
(Insert)
(Remove)
Refer to 13 page
for only supervise
settings
Warning
•Be sure the multi-lobby phone connect to the DOOR2 port.
•The door lock can connect to the doorphone. If the door lock is connected, be sure set the DOOR OPEN SET
item of the supervisor setting mode is CAMERA for door open function.
•Installing the door lock system designated by our company to your entrance door enables you to open the door
by pressing the Door Open button during an entrance call.
Caution
Household unit VS Door Camera
1 [RED] + 12 V
2 [GREEN] VOICE
3 [WHITE] VIDEO
4 [BLACK] GND
Door CameraDoor Lock
Household unit VS Lobbi phone
1 [RED] + 12 V
2 [GREEN] VOICE
3 [WHITE] VIDEO
4 [BLACK] GND
Household unit VS Interphone/Slave
1 [RED] + 12 V
2 [BLUE] DATA
3 [ORANGE] SOUND 1
4 [VIOLET] SOUND 2
5 [WHITE] VIDEO
6 [BLACK] GND
1
2
3
4
5
6
to SHT-CP611E/EN Door Lock
1 [RED] DOOR LOCK
2 [BLACK]
Household unit VS Door Lock
1 [RED] DOOR LOCK
2 [BLACK]
Household unit VS Bell
1 [RED] DOOR LOCK
2 [BLACK]
Note
•If a doorbell is connected, the DOOR1 port does not connect anything.
•If a doorbell is connected, be sure set the BELL SET item of the supervisor setting mode is SET.
Note

Troubleshooting
3130
The product packages are as shown in the figure below. Check they contain all components.
Components
Jumper
1EA
Jumper
1EA
EXT Harness 1EA
Mount Bracket Screw 2EA
EXT Harness 2EA
(for Door Lock)
EXT Harness 2EA
(for Door Phone)
EXT Harness 3EA
(for Interphone)
▶▶Household unit [SHT-3305 Series]
▶▶Door Camera [SHT-CP601/EN, SHT-CP611/EN, SHT-CP611E/EN]
Useful Information
Chapter 4
Mount Bracket
1EA
Mount Bracket
1EA
Mount Bracket Screw
2EA
Mount Bracket Screw
2EA
Ext. Harness 6Pin
1EA
Ext. Harness 6Pin
1EA
Jumper
1EA
Jumper
1EA
Interphone
1EA
Interphone
1EA
▶▶Interphone [SHT-IPE200/EN]
4 Pin for Door Camera
2 Pin for Camera Door Lock
(SHT-CP611E/EN model only)
▶▶Check This First!
The power does not turn on.
●
Make sure if the power is connected.
The screen is too dark.
●
Check the condition of the exterior lighting in the area of the camera.
●
Clean the exterior surface of the door camera.
●
Adjust the screen brightness in the function settings. (refer to page 11)
The screen brightness settings consist of 4 phases and factory default set is 2.
There is too much noise during calls.
●
Check to see if the door phone line has been short-circuited with the ground.
Calls are not audible.
●
Check the volume setting.
●
Check the wire connection between the monitor and the camera.

Product Specifications
3332
▶▶Household unit [SHT-3305 Series]
Useful Information
Chapter 4
Device
SHT-3305
Category
Communication Mode
Monitor Screen Size
LCD Resolution (dot)
LCD Screen Visible Angles
Video Scan Type
Video Signal Wire Connection
Camera Transmission
Distance
Chime Melody
Main Unit Electricity
Consumption
Weight
Dimension
Specifications
Hands-free/Handset Communication
4.3inch (Diagonal)
4.3inch RGB 480(H) x 272(V)
4.3 inch Horizontal : ±80°, Vertical : ±80°
(Condition C/R ≥10)
NTSC/PAL (Composite)
Two-wire Connection
Diameter : 0.65 mm / Optimal Distance: 30 m or less
Refer to page 10
Max. 1.3 A
1.2 Kg
200 mm(W) x 130 mm(H) x 35 mm(D)
Device
SMPS
(SHT-3305XM/EN)
Category
Input Power
Max. Power Consumption
DC Output Voltage/Current
Weight
Specifications
100V - 240 V ~, 1.0 A, 50 - 60 Hz
18 W
12 V / 1.5 A
70 g
Device
SHT-IPE200/EN
Category
Communication Mode
Chime Melody
Main Unit Electricity
Consumption
Weight
Dimension
Specifications
Handset Communication
Ding Dong, Cuckoo Waltz, Fur Elise
Max. 150mA
340g
98.5 mm(W) x 214 mm(H) x 54.8 mm(D)
▶▶Interphone [SHT-IPE200/EN]
Unit Name
DOOR
Camera
Items
Input Power
Video Signal Scanning Method
Dimensions
Weight
Standards
DC 12 V (Supplied from the household unit)
CCIR type
74.5 mm(W) x 135.5 mm(H) x 10.3 mm(D)
180 g
◆◆SSHHTT--CCPP660011//EENN
▶▶Door Camera [SHT-CP601/EN, SHT-CP611/EN, SHT-CP611E/EN]
Unit Name
DOOR
Camera
Items
Input Power
Video Signal Scanning Method
Dimensions
Weight
Standards
DC 12 V (Supplied from the household unit)
PAL type
74.5 mm(W) x 135.5 mm(H) x 10.3 mm(D)
180 g
◆◆SSHHTT--CCPP661111//EENN
Unit Name
DOOR
Camera
Items
Input Power
Video Signal Scanning Method
Dimensions
Weight
Standards
DC 12 V (Supplied from the household unit)
PAL type
74.5 mm(W) x 135.5 mm(H) x 10.3 mm(D)
180 g
◆◆SSHHTT--CCPP661111EE//EENN

3534
Memo
▶▶Product Warranty
Seoul Commtech Products are supplied with one(1) year warranty base from the
date of purchase, we’ll repair or replace the defective product with a new or factory
rebuilt replacement.
Subject of Warranty
1. This warranty applies to the original purchase only.
2. All warranty will be invalid if unauthorized repair or modifications are made
to the unit or in any case of accident, misuse, damage caused by improper
installation and altered serial numbers.
3. If you need a warranty service, you should send the product to customer
Dep’t or dealer office, the product in all cases must be accompanied
by the following items; Customer name, address, telephone number,
the serial numbers, copy of customer sales receipt showing the
purchase date and place
The Model number is on the box and front of the manual. The serial number
is on the unit. Record the Model and serial numbers in the spaces provided below.
Refer to these numbers for warranty service.
Model No. Serial No.
Product Warranty
Useful Information
Chapter 4