EZCOO EZ-MX42PRO-HAS User manual

User Manual
4x2 HDMI 2.0 Matrix
Optical audio output
4K@60 4:4:4 8bit
Scaler output
HDR
EZCOO - It’s easy, Just cool

This EZ-MX42PRO-HAS is a 4 in 2 out HDMI Matrix with Ultra HD up to 4k60 4:4:4
8bit HDR and HDCP2.2. It reliably distributes four HDMI source signal to two HDMI
displays. It is ideal for applications such as Home theatre, ofces, school, conference
rooms, shopping malls, hotels and museums, which require manage multiple sources
and distribute an HDMI source signal to multiple displays.
1. HDMI Matrix x1
2. Power supply x1
3. Mount ear x2
4. HOOK&LOOP x2
5. Reusable Cable Ties x2
6. product manual x1
7. IR remote x1
• Distributes four HDMI sources signal to two HDMI displays.
• HDMI output 1(A) support down Scaler output, 4K and 1080P compatible.
• HDMI2.0 with 4K@60 4:4:4 8bit and HDCP 2.2 compliant
• Support HDR 10 and HDR Dolby version.
• Support remote control, button control, DIP switch to set EDID.
• Support Audio DE-embed, optical audio out without display.
• Support 3D, Support deep color 30bit, 36bit
• Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC.
• Digital audio format, pass through as DTS-HD/Dolby-trueHD/
• LPCM7.1/DTS/Dolby-AC3/DSD, Dolby Atoms
• Support signal retiming, No loss of quality
• Support input up to 15metres AWG26 HDMI 2.0 standard cable length, output up
to 25metres AWG24 cable length
• No driver required, Plug and play, Installs in minutes
OVERVIEW
PACKING LIST
FEATURES

1. Connect one cable from HDMI source devices to HDMI input.
2. Connect one cable from each display (monitor or projector) to the HDMI outputs.
In this case, when the HDMI sources are 4K, it will support all the 4K displays.
In this case, when you use 4K HDMI sources, but one 1080P diaplay, please set the
EDID DIP switch as the above picture( HDMIOUT A downscaler from 4K to 1080P). For
more informations about the EDID SETTING, please refer to the next section.
INSTALLATION

REMOTE CONTROL
EDID SETTING
The remote control can be used to
turn on and off the matrix and switch
the HDMI source for each output.
Note：
• Please remove the insulation
slice before use.
• Please make sure the remote
is pointed directly at the IR
receiver windown.
DIP switch setting Function DIP switch setting Function
Note: Other options about EDID setting, please kindly use the API
commonds(Refer to the last section API Commands list).
Pass through- learning
EDID from HDMIOUT B.
HDMI OUT A downscaler
from 4K to 1080P.
Set EDID:
1080P@60Hz_2CH
_3D_HDR
Test Mode - Improve
compatibility.
Set EDID:
4K@60Hz_4:2:0_5.1CH
_3D_HDR
Set EDID:
4K@60Hz_4:4:4_5.1CH
_3D_HDR

TROUBLE SHOOTING
• Please connect 4K TV to HDMI Matrix OUT 2 (B) rstly; after 4K TV display well,
please connect the second display device to HDMI Matrix OUT 1 (A).
• Please connect 1080p HDMI display to matrix OUT 1(A), especially when 4K &
1080p TV work together.
• When turn off TVs & matrix, please turn on HDMI Matrix OUT 2 (B) 4K TV rstly,
especially when 4K & 1080p TV work together.
• HDMI matrix OUT 1(A) down-scale 4K to 1080p, does not support down-scale 4K
HDR Dolby Vision. NOT UP SCALER.
• DE-embed SPDIF Optical 5.1CH follows HDMI Matrix OUT 2 (B) , no need TV
connection.
• EDID DIP switch TEST MODE can improve compatibility of all HDMI sources,
solve HDCP issue.
• Does not support CEC.
• Editable EDID via DIP Switch provides 4K 60Hz HDR and 7.1ch sound separately,
so TV play 4K HDR video & Soundbar play 7.1ch audio together. Please check
below picture.

HDMI vertion HDMI 2.0 HDCP version HDCP 2.2
HDMI
resolution
24/50/60fs/4K*2K/1080p
/1080i/720p/576p/576i/480p/480i Video format 24bit/30bit, 36bit deep color
Audio format DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD/
Dolby Atoms
Input/Output
TMDS signal 0.5~1.5Volts p-p(TTL) Max bandwidth 600MHz
Input/Output
DDC signal 5Volts p-p (TTL) Max working current 200mA
Power adapter
format
Input: AC (50HZ, 60HZ):100V-
240V; Output: DC5V/2A Max baud rate 6Gbps
Operating
Temperature
range
(-15 to +55℃)
Operating
Humidity
range
5 to 90%RH
Dimension
(L x W x H) 162*94*20(mm) Weight 380g
Cable
General
HDMI Cable
Length
1080P 4K
8-bit 12-bit 8-bit
Input 49.2 ft (15m) 32.8ft (10m) 9.8ft (3m)
Output 65.6 ft (20m) 32.8ft (10m) 16.4 (5m)
SPECIFICATION

How to use the Micro-USB on the front panel.
We can control the matrix and upgrade the matrix via this port.
Please nd a Micro-USB cable, connect to the USB port on the front panel
to your windows PC(Laptop/Desktop).
It will install the driver aromatically
when the matrix connected,
please wait for a minute.
Baud Rate=57600bps, Data=8bit, Parity=None, Stop=1bit
Double click the UartAssist.exe.
Set the correct parameters and click <Open>
Please download the tool at
https://www.easycoolav.com/art/tech-support-a0040.html
UPDATE GUIDE
Upgrade
Send a command <ISP 32 1> +Enter, then click <Send> button.
After you sent this command, you will see <JUMP TO ISP MODE...>, and then click
<Close>
All LEDs on the matrix will be off.
NOTE: DO NOT remove any connection on the matrix at this time.

Then, double click the FlyMcu.exe,
Following as below order:
1. Search the port 2. Select 57600 bps
3. Load the .hex le 4. Start to ISP (update)

The conguration steps are the same as UPGRADE section.
Send “EZH” to get all API commands.
API Command via USB port
Command Function
EZH Get help, show all the commands
EZS RST Reset to Factory Defaults
EZS CAS EN Set Cascade Mode Enable (HDCP)
EZS CAS DIS Set Cascade Mode Disable (HDCP)
EZS OUTx VS INy Set Output x To Input y {x=[0~2](0=ALL), y=[1~4]}
EZS OUT1 VIDEOy Set Output 1 VIDEO Mode y {y=[1~2](1=BYPASS,2=4K->2K)scaler}
EZS OUT2 EXA EN Set Ex-Audio Output Enable
EZS OUT2 EXA DIS Set Ex-Audio Output Disable
EZS OUTx STREAM ON Set Output x Stream ON{x=[0~2](0=ALL)}Turn ON HDMI OUTPUT
EZS OUTx STREAM
OFF
Set Output x Stream OFF{x=[0~2](0=ALL)}Turn OFF HDMI
OUTPUT
EZS INx EDIDy Set EDID of HDMI input {x=[0~4](0=ALL), y=[1~16]}
EDID LIST 1-1080P60Hz_2CH(PCM)_HDR
2-1080P60Hz_6CH_HDR
3-1080P60Hz_8CH_HDR
4-1080P_3D_2CH(PCM)_HDR
5-1080P_3D_6CH_HDR
6-1080P_3D_8CH_HDR
7-4K30Hz_3D_2CH(PCM)_HDR
8-4K30Hz_3D_6CH_HDR
9-4K30Hz_3D_8CH_HDR
10-4K60Hz(Y420)_3D_2CH(PCM)_HDR
11-4K60Hz(Y420)_3D_6CH_HDR
12-4K60Hz(Y420)_3D_8CH_HDR
13-4K60Hz(Y444)_3D_2CH(PCM)_HDR
14-4K60Hz(Y444)_3D_6CH_HDR
15-4K60Hz(Y444)_3D_8CH_HDR
16- USER EDID
List of API Commands

When you want to set EDID as 4K@60Hz 7.1CH, please send a command "EZS IN0
EDID15" as follows.
Example

The information in this manual has been carefully checked and is
believed to be accurate. EZCOO TECHNOLOGY INC. assumes no
responsibility for any infringement of patents or other rights of third
parties which may result from its use.
EZCOO TECHNOLOGY INC. assumes no responsibility for any
inaccuracies that may be contained in this document. EZCOO TECHNOLOGY INC.
also makes no commitment to update or to keep current the information contained in
this document. EZCOO TECHNOLOGY INC. reserves the right to make improvements
to this document and/or product at any time and without notice.
When you need any technical assistance, please send e-mail to
[e-mail], [e-mail]
NOTES
DISCLAIMERS
CONTACTS
Please use this machine based on below instructions to keep longer lifetime.
1. The machine should be placed at the spot far away from the Damp,
High-Temperature, Dusty, Erosive, and Oxidant environment.
2. All parts will be free from the strong shake, hit, fall.
3. Touching the device with the wet hands is prohibited.
4. Please turn power off when machine is not used for long time.
5. Please do not open the cover and do not touch the inside parts.
6. Please use the original factory power adaptor.
7. Before power on, please check the connection cable carefully. And make sure that all
interfaces are normally connected.

EZCOO - It’s easy, Just cool